[Openbts-discuss] openbts with e310

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

hello all ,i followed the instruction here:
http://openbts.org/w/index.php?title=E3x0
when i run the
osmo-trx -f,
i got
linux; GNU C++ version 4.9.2; Boost_105700; UHD_003.010.git-156-g2d68f228

Config Settings
   Log Level............... NOTICE
   Device args.............
   TRX Base Port........... 5700
   TRX Address............. 127.0.0.1
   Channels................ 1
   Tx Samples-per-Symbol... 1
   EDGE support............ Disabled
   External Reference...... Disabled
   C0 Filler Table......... Dummy bursts
   Diversity............... Disabled
   Tuning offset........... 0
   RSSI to dBm offset...... 0
   Swap channels........... 0

-- Loading FPGA image: /usr/share/uhd/images/usrp_e310_fpga.bit... done
-- Initializing core control...
-- Performing register loopback test... pass
-- Performing register loopback test... pass
-- Performing register loopback test... pass
-- Performing CODEC loopback test... pass
-- Performing CODEC loopback test... pass
-- Setting time source to internal
-- Asking for clock rate 16 MHz
-- Actually got clock rate 16 MHz
-- Performing timer loopback test... pass
-- Performing timer loopback test... pass
-- Asking for clock rate 26 MHz
-- Actually got clock rate 26 MHz
-- Performing timer loopback test... pass
-- Performing timer loopback test... pass
-- Setting E3XX 1 SPS
-- Transceiver active with 1 channel(s)

then i run ./Openbts in the dir of Openbts/apps
i got

ALERT 13441:13441 2016-04-05T08:49:13.7 OpenBTS.cpp:595:main: OpenBTS
(re)starting, ver 5.0-master build date/time 2016-04-02T03:18:48
ALERT 13441:13441 2016-04-05T08:49:13.7 OpenBTS.cpp:596:main: OpenBTS
reading config file /etc/OpenBTS/OpenBTS.db
1459846153.731725 3070062592:

OpenBTS
Copyright 2008, 2009, 2010 Free Software Foundation, Inc.
Copyright 2010 Kestrel Signal Processing, Inc.
Copyright 2011, 2012, 2013, 2014 Range Networks, Inc.
Release 5.0-master+e9bac710e3 CommonLibs:11d8baa826 P formal build date
2016-04-01T07:54:25
"OpenBTS" is a registered trademark of Range Networks, Inc.

Contributors:
  Range Networks, Inc.:
    David Burgess, Harvind Samra, Donald Kirker, Doug Brown,
    Pat Thompson, Kurtis Heimerl, Michael Iedema, Dave Gotwisner
  Kestrel Signal Processing, Inc.:
    David Burgess, Harvind Samra, Raffi Sevlian, Roshan Baliga
  GNU Radio:
    Johnathan Corgan
  Others:
    Anne Kwong, Jacob Appelbaum, Joshua Lackey, Alon Levy
    Alexander Chemeris, Alberto Escudero-Pascual
Incorporated L/GPL libraries and components:
  libortp, LGPL, 2.1 Copyright 2001 Simon MORLAT sim...@li...
  libusb, LGPL 2.1, various copyright holders, www.libusb.org
  libzmq, LGPL 3:
      Copyright (c) 2009-2011 250bpm s.r.o.
      Copyright (c) 2011 Botond Ballo
      Copyright (c) 2007-2009 iMatix Corporation
Incorporated BSD/MIT-style libraries and components:
  A5/1 Pedagogical Implementation, Simplified BSD License, Copyright
1998-1999 Marc Briceno, Ian Goldberg, and David Wagner
  JsonBox, Copyright 2011 Anhero Inc.
  Google Core Dumper, BSD 3-Clause License, Copyright (c) 2005-2007, Google
Inc.
Incorporated public domain libraries and components:
  sqlite3, released to public domain 15 Sept 2001, www.sqlite.org

This program comes with ABSOLUTELY NO WARRANTY.

Use of this software may be subject to other legal restrictions,
including patent licensing and radio spectrum licensing.
All users of this software are expected to comply with applicable
regulations and laws.  See the LEGAL file in the source code for
more information.

Note to US Government Users:
 The OpenBTS software applications and associated documentation are
"Commercial
 Item(s)," as that term is defined at 48 C.F.R. Section 2.101, consisting of
 "Commercial Computer Software" and "Commercial Computer Software
Documentation,"
 as such terms are used in 48 C.F.R. 12.212 or 48 C.F.R. 227.7202, as
 applicable. Consistent with 48 C.F.R. 12.212 or 48 C.F.R. Sections
227.7202-1
 through 227.7202-4, as applicable, the Commercial Computer Software and
 Commercial Computer Software Documentation are being licensed to U.S.
Government
 end users (a) only as Commercial Items and (b) with only those rights as
are
 granted to all other end users pursuant to the terms and conditions of
 Range Networks' software licenses and master customer agreement.

1459846153.890517 3070062592:
Starting the system...
1459846154.528606 3070062592:
system ready

1459846154.529512 3070062592:
use the OpenBTSCLI utility to access CLI

1459846154.530466 3070062592: OpenBTSCLI network socket support for
tcp:49300

OpenBTS>

next is my config

OpenBTS> config
Control.GSMTAP.GPRS 0     [default]
Control.GSMTAP.GSM 0     [default]
Control.GSMTAP.TargetIP 127.0.0.1     [default]
Control.LUR.404RejectCause 0x04     [default]
Control.LUR.AttachDetach 1     [default]
Control.LUR.FailMode ACCEPT     [default]
Control.LUR.FailedRegistration.Message Your handset is not provisioned for
this network.      [default]
Control.LUR.FailedRegistration.ShortCode 1000     [default]
Control.LUR.NormalRegistration.Message (disabled)     [default]
Control.LUR.NormalRegistration.ShortCode 0000     [default]
Control.LUR.OpenRegistration .*
Control.LUR.OpenRegistration.Message Welcome to the test network.  Your
IMSI is      [default]
Control.LUR.OpenRegistration.Reject (disable)
Control.LUR.OpenRegistration.ShortCode 101     [default]
Control.LUR.QueryClassmark 0     [default]
Control.LUR.QueryIMEI 0     [default]
Control.LUR.RegistrationMessageFrequency FIRST     [default]
Control.LUR.SendTMSIs 0     [default]
Control.LUR.UnprovisionedRejectCause 0x04     [default]
Control.Reporting.PhysStatusTable /var/run/ChannelTable.db     [default]
Control.Reporting.StatsTable /var/log/OpenBTSStats.db     [default]
Control.Reporting.TMSITable /var/run/TMSITable.db     [default]
Control.Reporting.TransactionTable /var/run/TransactionTable.db
[default]
Control.SMSCB.Table (disabled)     [default]
Control.TMSITable.MaxAge 576     [default]
Control.VEA 0     [default]
GGSN.DNS (disabled)     [default]
GGSN.Firewall.Enable 1     [default]
GGSN.IP.TossDuplicatePackets 0     [default]
GGSN.MS.IP.Base 192.168.99.1     [default]
GGSN.MS.IP.MaxCount 254     [default]
GGSN.MS.IP.Route (disabled)     [default]
GGSN.ShellScript (disabled)     [default]
GPRS.CellOptions.T3168Code 5     [default]
GPRS.CellOptions.T3192Code 0     [default]
GPRS.ChannelCodingControl.RSSI -40     [default]
GPRS.Channels.Min.C0 2     [default]
GPRS.Channels.Min.CN 0     [default]
GPRS.Enable 0     [default]
GPRS.LocalTLLI.Enable 1     [default]
GPRS.Multislot.Max.Downlink 3     [default]
GPRS.Multislot.Max.Uplink 2     [default]
GPRS.NMO 2     [default]
GPRS.RAC 0     [default]
GPRS.RA_COLOUR 0     [default]
GPRS.Reassign.Enable 1     [default]
GPRS.TBF.EST 1     [default]
GPRS.TBF.Retry 1     [default]
GSM.BTS.RADIO_LINK_TIMEOUT 15     [default]
GSM.CallerID.Source auto     [default]
GSM.CellOptions.RADIO-LINK-TIMEOUT 15     [default]
GSM.CellSelection.CELL-RESELECT-HYSTERESIS 3     [default]
GSM.CellSelection.NCCsPermitted 0     [default]
GSM.CellSelection.NECI 1     [default]
GSM.Channels.C1sFirst 0     [default]
GSM.Channels.NumC1s auto     [default]
GSM.Channels.NumC7s auto     [default]
GSM.Channels.SDCCHReserve 0     [default]
GSM.Cipher.CCHBER 0     [default]
GSM.Cipher.Encrypt 0     [default]
GSM.Cipher.RandomNeighbor 0     [default]
GSM.Cipher.ScrambleFiller 0     [default]
GSM.Handover.FailureHoldoff 20     [default]
GSM.Handover.Margin 15     [default]
GSM.Handover.Ny1 50     [default]
GSM.Identity.BSIC.BCC 2     [default]
GSM.Identity.BSIC.NCC 0     [default]
GSM.Identity.CI 10     [default]
GSM.Identity.LAC 1000     [default]
GSM.Identity.MCC 001     [default]
GSM.Identity.MNC 02
GSM.Identity.ShortName Range     [default]
GSM.MS.Power.Damping 75     [default]
GSM.MS.Power.Max 33     [default]
GSM.MS.Power.Min 5     [default]
GSM.MS.TA.Damping 50     [default]
GSM.MS.TA.Max 62     [default]
GSM.MaxSpeechLatency 2     [default]
GSM.Neighbors (disabled)     [default]
GSM.Neighbors.NumToSend 31     [default]
GSM.RACH.AC 0x0400     [default]
GSM.RACH.MaxRetrans 1     [default]
GSM.RACH.TxInteger 14     [default]
GSM.Radio.ARFCNs 1     [default]
GSM.Radio.Band 900     [default]
GSM.Radio.C0 51     [default]
GSM.Radio.MaxExpectedDelaySpread 4     [default]
GSM.Radio.PowerManager.MaxAttenDB 10     [default]
GSM.Radio.PowerManager.MinAttenDB 0     [default]
GSM.Radio.RSSITarget -50     [default]
GSM.Radio.SNRTarget 10     [default]
GSM.ShowCountry 0     [default]
GSM.SpeechBuffer 1     [default]
GSM.Timer.Handover.Holdoff 10     [default]
GSM.Timer.T3109 30000     [default]
GSM.Timer.T3212 0     [default]
Log.Alarms.Max 20     [default]
Log.Level NOTICE     [default]
Peering.Neighbor.RefreshAge 60     [default]
Peering.NeighborTable.Path /var/run/NeighborTable.db     [default]
Peering.Port 16001     [default]
RTP.Range 98     [default]
RTP.Start 16484     [default]
SIP.DTMF.RFC2833 1     [default]
SIP.DTMF.RFC2833.PayloadType 101     [default]
SIP.DTMF.RFC2976 0     [default]
SIP.Local.IP 127.0.0.1     [default]
SIP.Local.Port 5062     [default]
SIP.Proxy.Registration 127.0.0.1:5064     [default]
SIP.Proxy.SMS 127.0.0.1:5063     [default]
SIP.Proxy.Speech 127.0.0.1:5060     [default]
SIP.Proxy.USSD (disabled)     [default]
SIP.RFC3428.NoTrying 0     [default]
SIP.SMSC smsc     [default]
SMS.FakeSrcSMSC 0000     [default]
SMS.MIMEType application/vnd.3gpp.sms     [default]
TRX.IP 127.0.0.1     [default]
OpenBTS>

my problem is :my cell phone can find the 00101,but can not connect to this
network
is there something wrong in my work?or i need to modify the config ?

thank you

--Ekko

[Openbts-discuss] openbts with e310

GSM L1-L3 stack with SIP network interfaces

[Openbts-discuss] openbts with e310