Re: [Openbts-discuss] OpenBTS Osmo-TRX high noise value

[Daigle, F. <fd...@cm...>]

Hi Mona,


Have you seend this thread regarding the no audio-issue?

https://sourceforge.net/p/openbts/mailman/message/34886897/


For the Noise RSSI, the value makes no sense. But if you can place a call between two phones, then I don't think the problem is related to RF Noise.


Regards,

Frédéric


________________________________
De : Mona Lisampson <mon...@gm...>
Envoyé : 9 mars 2016 05:43
À : ope...@li...
Objet : [Openbts-discuss] OpenBTS Osmo-TRX high noise value

Hi all,

I am a student currently studying OpenBTS. I have an Ettus USRP E110.
I have installed OpenBTS 5.0 according to the steps listed on the OpenBTS wiki:

http://openbts.org/w/index.php?title=E3x0#USRP_E310_and_E100.2FE110
and
http://openbts.org/w/index.php?title=BuildInstallRun#Building.2C_Installing_and_Running_OpenBTS

I have successfully attached 2 MS to the BTS and placed a call to the 600 extension on asterisk and also between them. The problem is that there is no sound between the 2 MS.


The output of the noise command is strange and I think it has something to do with it:

OpenBTS> noise
noise RSSI is -2147483647 dB wrt full scale
MS RSSI target is -50 dB wrt full scale
INFO: the current noise level is acceptable

OpenBTS> power
current downlink power -10 dB wrt full scale


Also, OsmoTRX starts with the following message which is repeated periodically. Is this normal or something to worry about?

NOTICE 111716960 10:39:28:3 Transceiver.cpp:404:pushRadioVector: dumping STALE burst in TRX -> USRP interface.

Can anyone help me? If you need additional info, I will provide it.