Menu
▾
▴
Re: [Openbts-discuss] openbts5.0+USRP B210 help
|
From: john l. <joh...@gm...> - 2016-01-14 09:30:53
|
Hi Shawn,
Thank you so much for your reply.
I sorry i not very understand what you said. Is the nmcli.py
under /openbts/NodeManager?or other folder?Could you tell me the specific
command?
Sincerely thank you.
best wishes,
John
On Thu, Jan 14, 2016 at 12:45 PM, Shawnerz <sha...@ya...> wrote:
> John,
> This came from another user on the group named Scott (thanks, Scott :) ).
> I have not tried this out, but i assume it does work.
>
> To add subscribers, [the OpenBTS book] says to type the following exactly,
> but substituted with your information:
> ./nmcli.py sipauthserve subscribers create "iPhone 4" IMSI214057715229963
> \ 6055551234
>
> This is not the case. Upon tinkering with it, I discovered that it will
> only work if you enter the following as shown below:
>
> ./nmcli.py sipauthserve subscribers create "name-of-device"
> IMSI214057715229963 5551212
>
> Good luck,
> -Shawn
>
> ------------------------------
> *From:* john liu <joh...@gm...>
> *To:* Federico Colangelo <f.c...@ho...>
> *Cc:* OpenBTS Discuss <ope...@li...>
> *Sent:* Wednesday, January 13, 2016 10:18 PM
>
> *Subject:* Re: [Openbts-discuss] openbts5.0+USRP B210 help
>
> Hi FC and all
> When I replaced B210 with N210,It's OK now,and my phone can send messages
> to each other.But I had another problem that they can't call each
> other.Here is my config:
>
> config GSM.Radio.Band 900
>
> config GSM.Radio.C0 1
>
> config Control.LUR.OpenRegistration .*
>
>
> Do you have any suggestions?
>
>
> thank you for your reply.
>
> best regards
>
> John
>
>
> On Wed, Jan 13, 2016 at 7:10 PM, Federico Colangelo <f.c...@ho...>
> wrote:
>
> I had encountered the same problem with the B210 and i still didn't manage
> to solve it.
> Is it possible that the problem is somehow related to the clock?
>
> FC
>
> ------------------------------
> Date: Tue, 12 Jan 2016 10:37:17 +0800
> From: joh...@gm...
> To: sco...@pr...
> CC: ope...@li...
> Subject: Re: [Openbts-discuss] openbts5.0+USRP B210 help
>
> Hi Scott, thank you for your reply.
> yes,sipauthserve and Asterisk are already running.As below:
> Job is already running: sipauthserve
> Job is already running: smqueue
> Job is already running: openbts
> Job is already running: asterisk
>
> thanks again!
> John
>
> On Tue, Jan 12, 2016 at 10:14 AM, Scott Bonk | Premier Telecom <
> sco...@pr...> wrote:
>
> Verify that sipauthserve and Asterisk are running.
>
> Regards,
>
> Scott S. Bonk, II
> Business Owner
>
> Premier Telecom
> PO Box 2954
> Oak Harbor, WA 98277
> (360) 914-3000 | office
> (360) 929-3102 | mobile
> premiertelecom.us
> *From: *john liu
> *Sent: *Monday, January 11, 2016 18:12
> *To: *ope...@li...
> *Subject: *[Openbts-discuss] openbts5.0+USRP B210 help
>
> Dear all,
> We builded openbts5.0 with Ettus USRP B210,and the moble
> phone could find "00101" signal,but could't access it,and the moble phone
> display "no network can aceess " . here is our config information.
>
> OpenBTS> config
> Control.GSMTAP.GPRS 0 [default]
> Control.GSMTAP.GSM 0 [default]
> Control.GSMTAP.TargetIP 127.0.0.1 [default]
> Control.LUR.404RejectCause 0x04 [default]
> Control.LUR.AttachDetach 1 [default]
> Control.LUR.FailMode ACCEPT [default]
> Control.LUR.FailedRegistration.Message Your handset is not provisioned for
> this network. [default]
> Control.LUR.FailedRegistration.ShortCode 1000 [default]
> Control.LUR.NormalRegistration.Message (disabled) [default]
> Control.LUR.NormalRegistration.ShortCode 0000 [default]
> Control.LUR.OpenRegistration .*
> Control.LUR.OpenRegistration.Message get me! Your IMSI is
> Control.LUR.OpenRegistration.Reject (disabled) [default]
> Control.LUR.OpenRegistration.ShortCode 101 [default]
> Control.LUR.QueryClassmark 0 [default]
> Control.LUR.QueryIMEI 0 [default]
> Control.LUR.RegistrationMessageFrequency FIRST [default]
> Control.LUR.SendTMSIs 0 [default]
> Control.LUR.UnprovisionedRejectCause 0x04 [default]
> Control.Reporting.PhysStatusTable /var/run/ChannelTable.db [default]
> Control.Reporting.StatsTable /var/log/OpenBTSStats.db [default]
> Control.Reporting.TMSITable /var/run/TMSITable.db [default]
> Control.Reporting.TransactionTable /var/run/TransactionTable.db
> [default]
> Control.SMSCB.Table (disabled) [default]
> Control.TMSITable.MaxAge 576 [default]
> Control.VEA 0 [default]
> GGSN.DNS (disabled) [default]
> GGSN.Firewall.Enable 1 [default]
> GGSN.IP.TossDuplicatePackets 0 [default]
> GGSN.MS.IP.Base 192.168.99.1 [default]
> GGSN.MS.IP.MaxCount 254 [default]
> GGSN.MS.IP.Route (disabled) [default]
> GGSN.ShellScript (disabled) [default]
> GPRS.CellOptions.T3168Code 5 [default]
> GPRS.CellOptions.T3192Code 0 [default]
> GPRS.ChannelCodingControl.RSSI -40 [default]
> GPRS.Channels.Min.C0 2 [default]
> GPRS.Channels.Min.CN <http://gprs.channels.min.cn/> 0 [default]
> GPRS.Enable 0 [default]
> GPRS.LocalTLLI.Enable 1 [default]
> GPRS.Multislot.Max.Downlink 3 [default]
> GPRS.Multislot.Max.Uplink 2 [default]
> GPRS.NMO 2 [default]
> GPRS.RAC 0 [default]
> GPRS.RA_COLOUR 0 [default]
> GPRS.Reassign.Enable 1 [default]
> GPRS.TBF.EST 1 [default]
> GPRS.TBF.Retry 1 [default]
> GSM.BTS.RADIO_LINK_TIMEOUT 15 [default]
> GSM.CallerID.Source auto [default]
> GSM.CellOptions.RADIO-LINK-TIMEOUT 15 [default]
> GSM.CellSelection.CELL-RESELECT-HYSTERESIS 3 [default]
> GSM.CellSelection.NCCsPermitted 0 [default]
> GSM.CellSelection.NECI 1 [default]
> GSM.Channels.C1sFirst 0 [default]
> GSM.Channels.NumC1s auto [default]
> GSM.Channels.NumC7s auto [default]
> GSM.Channels.SDCCHReserve 0 [default]
> GSM.Cipher.CCHBER 0 [default]
> GSM.Cipher.Encrypt 0 [default]
> GSM.Cipher.RandomNeighbor 0 [default]
> GSM.Cipher.ScrambleFiller 0 [default]
> GSM.Handover.FailureHoldoff 20 [default]
> GSM.Handover.Margin 15 [default]
> GSM.Handover.Ny1 50 [default]
> GSM.Identity.BSIC.BCC 2 [default]
> GSM.Identity.BSIC.NCC 0 [default]
> GSM.Identity.CI <http://gsm.identity.ci/> 10 [default]
> GSM.Identity.LAC 1000 [default]
> GSM.Identity.MCC 001 [default]
> GSM.Identity.MNC 01 [default]
> GSM.Identity.ShortName B210station
> GSM.MS.Power.Damping 75 [default]
> GSM.MS.Power.Max 33 [default]
> GSM.MS.Power.Min 5 [default]
> GSM.MS.TA.Damping 50 [default]
> GSM.MS.TA.Max 62 [default]
> GSM.MaxSpeechLatency 2 [default]
> GSM.Neighbors (disabled) [default]
> GSM.Neighbors.NumToSend 31 [default]
> GSM.RACH.AC <http://gsm.rach.ac/> 0x0400 [default]
> GSM.RACH.MaxRetrans 1 [default]
> GSM.RACH.TxInteger 14 [default]
> GSM.Radio.ARFCNs 1 [default]
> GSM.Radio.Band 900 [default]
> GSM.Radio.C0 1
> GSM.Radio.MaxExpectedDelaySpread 4 [default]
> GSM.Radio.PowerManager.MaxAttenDB 10 [default]
> GSM.Radio.PowerManager.MinAttenDB 0 [default]
> GSM.Radio.RSSITarget -50 [default]
> GSM.Radio.SNRTarget 10 [default]
> GSM.ShowCountry 0 [default]
> GSM.SpeechBuffer 1 [default]
> GSM.Timer.Handover.Holdoff 10 [default]
> GSM.Timer.T3109 30000 [default]
> GSM.Timer.T3212 0 [default]
> Log.Alarms.Max 20 [default]
> Log.Level NOTICE [default]
> Peering.Neighbor.RefreshAge 60 [default]
> Peering.NeighborTable.Path /var/run/NeighborTable.db [default]
> Peering.Port 16001 [default]
> RTP.Range 98 [default]
> RTP.Start 16484 [default]
> SIP.DTMF.RFC2833 1 [default]
> SIP.DTMF.RFC2833.PayloadType 101 [default]
> SIP.DTMF.RFC2976 0 [default]
> SIP.Local.IP 127.0.0.1 [default]
> SIP.Local.Port 5062 [default]
> SIP.Proxy.Registration 127.0.0.1:5064 [default]
> SIP.Proxy.SMS 127.0.0.1:5063 [default]
> SIP.Proxy.Speech 127.0.0.1:5060 [default]
> SIP.Proxy.USSD (disabled) [default]
> SIP.RFC3428.NoTrying 0 [default]
> SIP.SMSC smsc [default]
> SMS.FakeSrcSMSC 0000 [default]
> SMS.MIMEType application/vnd.3gpp.sms [default]
> TRX.IP 127.0.0.1 [default]
>
> Sincerely thank you for your reply.
> best regards
> John
>
>
>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance APM
> + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor
> end-to-end web transactions and take corrective actions now Troubleshoot
> faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
> _______________________________________________ Openbts-discuss mailing
> list Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/openbts-discuss
>
>
>
>
> ------------------------------------------------------------------------------
> Site24x7 APM Insight: Get Deep Visibility into Application Performance
> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
> Monitor end-to-end web transactions and take corrective actions now
> Troubleshoot faster and improve end-user experience. Signup Now!
> http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
>
> _______________________________________________
> Openbts-discuss mailing list
> Ope...@li...
> https://lists.sourceforge.net/lists/listinfo/openbts-discuss
>
>
>
|
