Re: [Openbts-discuss] openbts5.0+USRP B210 help

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

John,This came from another user on the group named Scott (thanks, Scott :) ). I have not tried this out, but i assume it does work.
To add subscribers, [the OpenBTS book] says to type the following exactly, but substituted with your information:
./nmcli.py sipauthserve subscribers create "iPhone 4" IMSI214057715229963 \ 6055551234

This is not the case. Upon tinkering with it, I discovered that it will only work if you enter the following as shown below:

./nmcli.py sipauthserve subscribers create "name-of-device" IMSI214057715229963 5551212

 Good luck,-Shawn

      From: john liu <joh...@gm...>
 To: Federico Colangelo <f.c...@ho...> 
Cc: OpenBTS Discuss <ope...@li...>
 Sent: Wednesday, January 13, 2016 10:18 PM
 Subject: Re: [Openbts-discuss] openbts5.0+USRP B210 help

Hi FC and allWhen I replaced B210 with N210,It's OK now,and my phone can send messages to each other.But I had another problem that they can't call each other.Here is my config:config GSM.Radio.Band 900config GSM.Radio.C0 1config Control.LUR.OpenRegistration .*
Do you have any suggestions?

thank you for your reply.best regardsJohn
On Wed, Jan 13, 2016 at 7:10 PM, Federico Colangelo <f.c...@ho...> wrote:

I had encountered the same problem with the B210 and i still didn't manage to solve it.Is it possible that the problem is somehow related to the clock?
FC

Date: Tue, 12 Jan 2016 10:37:17 +0800
From: joh...@gm...
To: sco...@pr...
CC: ope...@li...
Subject: Re: [Openbts-discuss] openbts5.0+USRP B210 help

Hi Scott,      thank you for your reply.      yes,sipauthserve and Asterisk are already running.As below:     Job is already running: sipauthserve     Job is already running: smqueue
     Job is already running: openbts
     Job is already running: asterisk

thanks again!John
On Tue, Jan 12, 2016 at 10:14 AM, Scott Bonk | Premier Telecom <sco...@pr...> wrote:

 Verify that sipauthserve and Asterisk are running. 
  Regards,

Scott S. Bonk, II
Business Owner

Premier Telecom
PO Box 2954
Oak Harbor, WA 98277
(360) 914-3000 | office
(360) 929-3102 | mobile
premiertelecom.us 
|   From: john liuSent: Monday, January 11, 2016 18:12To: ope...@li...: [Openbts-discuss] openbts5.0+USRP B210 help |

Dear all,             We builded openbts5.0 with Ettus USRP B210,and the moble phone could find "00101" signal,but could't access it,and the moble phone display "no network can aceess " . here is our config information.
OpenBTS> configControl.GSMTAP.GPRS 0     [default]Control.GSMTAP.GSM 0     [default]Control.GSMTAP.TargetIP 127.0.0.1     [default]Control.LUR.404RejectCause 0x04     [default]Control.LUR.AttachDetach 1     [default]Control.LUR.FailMode ACCEPT     [default]Control.LUR.FailedRegistration.Message Your handset is not provisioned for this network.      [default]Control.LUR.FailedRegistration.ShortCode 1000     [default]Control.LUR.NormalRegistration.Message (disabled)     [default]Control.LUR.NormalRegistration.ShortCode 0000     [default]Control.LUR.OpenRegistration .*Control.LUR.OpenRegistration.Message get me! Your IMSI isControl.LUR.OpenRegistration.Reject (disabled)     [default]Control.LUR.OpenRegistration.ShortCode 101     [default]Control.LUR.QueryClassmark 0     [default]Control.LUR.QueryIMEI 0     [default]Control.LUR.RegistrationMessageFrequency FIRST     [default]Control.LUR.SendTMSIs 0     [default]Control.LUR.UnprovisionedRejectCause 0x04     [default]Control.Reporting.PhysStatusTable /var/run/ChannelTable.db     [default]Control.Reporting.StatsTable /var/log/OpenBTSStats.db     [default]Control.Reporting.TMSITable /var/run/TMSITable.db     [default]Control.Reporting.TransactionTable /var/run/TransactionTable.db     [default]Control.SMSCB.Table (disabled)     [default]Control.TMSITable.MaxAge 576     [default]Control.VEA 0     [default]GGSN.DNS (disabled)     [default]GGSN.Firewall.Enable 1     [default]GGSN.IP.TossDuplicatePackets 0     [default]GGSN.MS.IP.Base 192.168.99.1     [default]GGSN.MS.IP.MaxCount 254     [default]GGSN.MS.IP.Route (disabled)     [default]GGSN.ShellScript (disabled)     [default]GPRS.CellOptions.T3168Code 5     [default]GPRS.CellOptions.T3192Code 0     [default]GPRS.ChannelCodingControl.RSSI -40     [default]GPRS.Channels.Min.C0 2     [default]GPRS.Channels.Min.CN 0     [default]GPRS.Enable 0     [default]GPRS.LocalTLLI.Enable 1     [default]GPRS.Multislot.Max.Downlink 3     [default]GPRS.Multislot.Max.Uplink 2     [default]GPRS.NMO 2     [default]GPRS.RAC 0     [default]GPRS.RA_COLOUR 0     [default]GPRS.Reassign.Enable 1     [default]GPRS.TBF.EST 1     [default]GPRS.TBF.Retry 1     [default]GSM.BTS.RADIO_LINK_TIMEOUT 15     [default]GSM.CallerID.Source auto     [default]GSM.CellOptions.RADIO-LINK-TIMEOUT 15     [default]GSM.CellSelection.CELL-RESELECT-HYSTERESIS 3     [default]GSM.CellSelection.NCCsPermitted 0     [default]GSM.CellSelection.NECI 1     [default]GSM.Channels.C1sFirst 0     [default]GSM.Channels.NumC1s auto     [default]GSM.Channels.NumC7s auto     [default]GSM.Channels.SDCCHReserve 0     [default]GSM.Cipher.CCHBER 0     [default]GSM.Cipher.Encrypt 0     [default]GSM.Cipher.RandomNeighbor 0     [default]GSM.Cipher.ScrambleFiller 0     [default]GSM.Handover.FailureHoldoff 20     [default]GSM.Handover.Margin 15     [default]GSM.Handover.Ny1 50     [default]GSM.Identity.BSIC.BCC 2     [default]GSM.Identity.BSIC.NCC 0     [default]GSM.Identity.CI 10     [default]GSM.Identity.LAC 1000     [default]GSM.Identity.MCC 001     [default]GSM.Identity.MNC 01     [default]GSM.Identity.ShortName B210stationGSM.MS.Power.Damping 75     [default]GSM.MS.Power.Max 33     [default]GSM.MS.Power.Min 5     [default]GSM.MS.TA.Damping 50     [default]GSM.MS.TA.Max 62     [default]GSM.MaxSpeechLatency 2     [default]GSM.Neighbors (disabled)     [default]GSM.Neighbors.NumToSend 31     [default]GSM.RACH.AC 0x0400     [default]GSM.RACH.MaxRetrans 1     [default]GSM.RACH.TxInteger 14     [default]GSM.Radio.ARFCNs 1     [default]GSM.Radio.Band 900     [default]GSM.Radio.C0 1GSM.Radio.MaxExpectedDelaySpread 4     [default]GSM.Radio.PowerManager.MaxAttenDB 10     [default]GSM.Radio.PowerManager.MinAttenDB 0     [default]GSM.Radio.RSSITarget -50     [default]GSM.Radio.SNRTarget 10     [default]GSM.ShowCountry 0     [default]GSM.SpeechBuffer 1     [default]GSM.Timer.Handover.Holdoff 10     [default]GSM.Timer.T3109 30000     [default]GSM.Timer.T3212 0     [default]Log.Alarms.Max 20     [default]Log.Level NOTICE     [default]Peering.Neighbor.RefreshAge 60     [default]Peering.NeighborTable.Path /var/run/NeighborTable.db     [default]Peering.Port 16001     [default]RTP.Range 98     [default]RTP.Start 16484     [default]SIP.DTMF.RFC2833 1     [default]SIP.DTMF.RFC2833.PayloadType 101     [default]SIP.DTMF.RFC2976 0     [default]SIP.Local.IP 127.0.0.1     [default]SIP.Local.Port 5062     [default]SIP.Proxy.Registration 127.0.0.1:5064     [default]SIP.Proxy.SMS 127.0.0.1:5063     [default]SIP.Proxy.Speech 127.0.0.1:5060     [default]SIP.Proxy.USSD (disabled)     [default]SIP.RFC3428.NoTrying 0     [default]SIP.SMSC smsc     [default]SMS.FakeSrcSMSC 0000     [default]SMS.MIMEType application/vnd.3gpp.sms     [default]TRX.IP 127.0.0.1     [default]
Sincerely thank you for your reply.
best regardsJohn

------------------------------------------------------------------------------Site24x7 APM Insight: Get Deep Visibility into Application PerformanceAPM + Mobile APM + RUM: Monitor 3 App instances at just $35/MonthMonitor end-to-end web transactions and take corrective actions nowTroubleshoot faster and improve end-user experience. Signup Now!http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________Openbts-discuss mailing lis...@li...://lists.sourceforge.net/lists/listinfo/openbts-discuss 

------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=267308311&iu=/4140
_______________________________________________
Openbts-discuss mailing list
Ope...@li...
https://lists.sourceforge.net/lists/listinfo/openbts-discuss

Re: [Openbts-discuss] openbts5.0+USRP B210 help

GSM L1-L3 stack with SIP network interfaces

Re: [Openbts-discuss] openbts5.0+USRP B210 help