Re: [Openbts-discuss] OpenBTS

[Ralph A. S. d. <ra...@sc...>]

First check that the channel you are using is really free. Then try adjusting the RX gain until the error is gone...

 

Ralph.

 

From: alfred noble [mailto:alf...@gm...] 
Sent: Thursday, 29 October, 2015 14:02
To: Scott Bonk | Premier Telecom
Cc: ope...@li...
Subject: Re: [Openbts-discuss] OpenBTS

 

Thanks 

about a different band I cannot since GSM in my country is on 900MHz and for ARFCN , I used channel 51 but still get the warning indicating that the uplink is impossible 

Thanks 

 

On Thu, Oct 29, 2015 at 4:31 PM, alfred noble <alf...@gm...> wrote:

Thanks 

about a different band I cannot since GSM in my country is on 900MHz and for ARFCN , I used channel 51 but still get the warning indicating that the uplink is impossible 

Thanks 

 

 

On Wed, Oct 28, 2015 at 11:09 AM, Scott Bonk | Premier Telecom <sco...@pr...> wrote:

Try changing to a different band or ARFCN.

 

Regards,

Scott S. Bonk, II
Business Owner

Premier Telecom
PO Box 2954
Oak Harbor, WA 98277
(360) <tel:%28360%29%C2%A0914-3000>  914-3000 | office
(360) <tel:%28360%29%C2%A0929-3102>  929-3102 | mobile
premiertelecom.us


From: alfred noble

Sent: Wednesday, October 28, 2015 00:33

To: ope...@li...

Subject: [Openbts-discuss] OpenBTS

 

Hi every one 

I followed step by step the tutorial available at the link below
 http://openbts.org/ 

to install openbts on ubuntu 14.04 64bit 

every thing is fine except that when I execute the command noise  then I receive the following warning : 
WARNING: the current noise level exceeds the MS RSSI target, uplink connectivity
will be impossible.

I did what I was supposed based on the troubleshoot in the above link tutorial such as antenna alignment , reducing the power and boosting the headset power ,  but nothing changed and I still receive the same warning , 

I have usrp n210 and during installation I did NOT receive any kind of errors   

I would be grateful in anyone could help me on that 

thanks 

alfred