[Openbts-discuss] Problem wth "clkit_61_44mhz.sh"

[Amirhosein n. <ami...@ya...>]

Hi,
In installing OpenBTS-UMTS, when i execute command     ./clkit_61_44mhz.sh the log says :
Loading ezusb.ihx firmware file... resetting EZ-USBsudo: ./RAD1Cmd: command not found3G PLL register update utility for 61.44MhzBegin updating Si5338 registerssudo: ./RAD1Cmd: command not foundMultiSynth2 frequency Conf MS2_P1[7:0]sudo: ./RAD1Cmd: command not foundMultiSynth2 frequency Conf MS2_P1[15:8]sudo: ./RAD1Cmd: command not foundMultiSynth2 frequency Conf MS2_P2[5:0] MS2_P1[17:18] Setting clock output 2 to 61.44Mhz completesudo: ./RAD1Cmd: command not foundMultiSynth2 frequency Conf MS2_P3[7:0]sudo: ./RAD1Cmd: command not foundMultiSynth3 frequency Conf MS3_P1[7:0]sudo: ./RAD1Cmd: command not foundMultiSynth3 frequency Conf MS3_P1[15:8]sudo: ./RAD1Cmd: command not foundMultiSynth3 frequency Conf MS3_P2[5:0] MS3_P1[17:18] sudo: ./RAD1Cmd: command not foundMultiSynth3 frequency Conf MS3_P3[7:0]Setting clock output 3 to 61.44Mhz completeCompleted 61.44MHz configuration... soft resettingsudo: ./RAD1Cmd: command not foundSoft reset complete... exiting
the ./RSD1Cmd dont run correctly   .... so clock output 1 dose'nt set to 13MHz
Can anybody help me??? PLEASE ...