|
From: Rene S. <r.s...@gm...> - 2014-10-12 13:49:09
|
Hello, maybe some more information.
Please any help to get this working is appreciated.
I'm not sure why i can't connect via GPRS, but maybe there's already
something wrong with the attach procedure as i don't see a tmsis
(i've activated roaming on my iphone and did keep the default
APN/userid/pwd set to the vodafone defaults)
I'm also not sure or the attach from my pine is correct, i do see that i
have on the top left corner full coverage and it's being served by Range
(sometimes i do Test PLMN 1-1)
i've only changed the following parameters after the default configuration:
Control.LUR.OpenRegistration ^20404557014
GGSN.DNS 192.168.1.254 8.8.8.8
GGSN.Firewall.Enable 0
GPRS.Enable 1
See config and commands below
OpenBTS> sgsn list
OpenBTS> tmsis
IMSI TMSI IMEI AUTH CREATED ACCESSED TMSI_ASSIGNED
20404557014XXXX - 01355200565XXXX 2 49m 33m 0
OpenBTS> tmsis -l
IMSI TMSI IMEI AUTH CREATED ACCESSED TMSI_ASSIGNED
PTMSI_ASSIGNED AUTH_EXPIRY REJECT_CODE ASSOCIATED_URI ASSERTED_IDENTITY
WELCOME_SENT
20404557014XXXX - 01355200565XXXX 2 49m 33m 0 0
- 0 1
OpenBTS> sgsn list
OpenBTS> config
Control.GSMTAP.GPRS 0 [default]
Control.GSMTAP.GSM 0 [default]
Control.GSMTAP.TargetIP 127.0.0.1 [default]
Control.LUR.404RejectCause 0x04 [default]
Control.LUR.AttachDetach 1 [default]
Control.LUR.FailMode ACCEPT [default]
Control.LUR.FailedRegistration.Message Your handset is not provisioned for
this network. [default]
Control.LUR.FailedRegistration.ShortCode 1000 [default]
Control.LUR.NormalRegistration.Message (disabled) [default]
Control.LUR.NormalRegistration.ShortCode 0000 [default]
Control.LUR.OpenRegistration ^20404557014
Control.LUR.OpenRegistration.Message Welcome to the test network. Your
IMSI is [default]
Control.LUR.OpenRegistration.Reject (disabled) [default]
Control.LUR.OpenRegistration.ShortCode 101 [default]
Control.LUR.QueryClassmark 0 [default]
Control.LUR.QueryIMEI 0 [default]
Control.LUR.RegistrationMessageFrequency FIRST [default]
Control.LUR.SendTMSIs 0 [default]
Control.LUR.UnprovisionedRejectCause 0x04 [default]
Control.Reporting.PhysStatusTable /var/run/ChannelTable.db [default]
Control.Reporting.StatsTable /var/log/OpenBTSStats.db [default]
Control.Reporting.TMSITable /var/run/TMSITable.db [default]
Control.Reporting.TransactionTable /var/run/TransactionTable.db
[default]
Control.SMSCB.Table (disabled) [default]
Control.TMSITable.MaxAge 576 [default]
Control.VEA 0 [default]
GGSN.DNS 192.168.1.254 8.8.8.8
GGSN.Firewall.Enable 0
GGSN.IP.TossDuplicatePackets 0 [default]
GGSN.MS.IP.Base 192.168.99.1 [default]
GGSN.MS.IP.MaxCount 254 [default]
GGSN.MS.IP.Route (disabled) [default]
GGSN.ShellScript (disabled) [default]
GPRS.CellOptions.T3168Code 5 [default]
GPRS.CellOptions.T3192Code 0 [default]
GPRS.ChannelCodingControl.RSSI -40 [default]
GPRS.Channels.Min.C0 2 [default]
GPRS.Channels.Min.CN 0 [default]
GPRS.Enable 1
GPRS.LocalTLLI.Enable 1 [default]
GPRS.Multislot.Max.Downlink 3 [default]
GPRS.Multislot.Max.Uplink 2 [default]
GPRS.NMO 2 [default]
GPRS.RAC 0 [default]
GPRS.RA_COLOUR 0 [default]
GPRS.Reassign.Enable 1 [default]
GPRS.TBF.EST 1 [default]
GPRS.TBF.Retry 1 [default]
GSM.BTS.RADIO_LINK_TIMEOUT 15 [default]
GSM.CallerID.Source auto [default]
GSM.CellOptions.RADIO-LINK-TIMEOUT 15 [default]
GSM.CellSelection.CELL-RESELECT-HYSTERESIS 3 [default]
GSM.CellSelection.NCCsPermitted 0 [default]
GSM.CellSelection.NECI 1 [default]
GSM.Channels.C1sFirst 0 [default]
GSM.Channels.NumC1s auto [default]
GSM.Channels.NumC7s auto [default]
GSM.Channels.SDCCHReserve 0 [default]
GSM.Cipher.CCHBER 0 [default]
GSM.Cipher.Encrypt 0 [default]
GSM.Cipher.RandomNeighbor 0 [default]
GSM.Cipher.ScrambleFiller 0 [default]
GSM.Handover.FailureHoldoff 20 [default]
GSM.Handover.Margin 15 [default]
GSM.Handover.Ny1 50 [default]
GSM.Identity.BSIC.BCC 2 [default]
GSM.Identity.BSIC.NCC 0 [default]
GSM.Identity.CI 10 [default]
GSM.Identity.LAC 1000 [default]
GSM.Identity.MCC 001 [default]
GSM.Identity.MNC 01 [default]
GSM.Identity.ShortName Range [default]
GSM.MS.Power.Damping 75 [default]
GSM.MS.Power.Max 33 [default]
GSM.MS.Power.Min 5 [default]
GSM.MS.TA.Damping 50 [default]
GSM.MS.TA.Max 62 [default]
GSM.MaxSpeechLatency 2 [default]
GSM.Neighbors (disabled) [default]
GSM.Neighbors.NumToSend 31 [default]
GSM.RACH.AC 0x0400 [default]
GSM.RACH.MaxRetrans 1 [default]
GSM.RACH.TxInteger 14 [default]
GSM.Radio.ARFCNs 1 [default]
GSM.Radio.Band 900 [default]
GSM.Radio.C0 51 [default]
GSM.Radio.MaxExpectedDelaySpread 4 [default]
GSM.Radio.PowerManager.MaxAttenDB 10 [default]
GSM.Radio.PowerManager.MinAttenDB 0 [default]
GSM.Radio.RSSITarget -50 [default]
GSM.Radio.SNRTarget 10 [default]
GSM.ShowCountry 0 [default]
GSM.SpeechBuffer 1 [default]
GSM.Timer.Handover.Holdoff 10 [default]
GSM.Timer.T3109 30000 [default]
GSM.Timer.T3212 0 [default]
Log.Alarms.Max 20 [default]
Log.Level NOTICE [default]
Peering.Neighbor.RefreshAge 60 [default]
Peering.NeighborTable.Path /var/run/NeighborTable.db [default]
Peering.Port 16001 [default]
RTP.Range 98 [default]
RTP.Start 16484 [default]
SIP.DTMF.RFC2833 1 [default]
SIP.DTMF.RFC2833.PayloadType 101 [default]
SIP.DTMF.RFC2976 0 [default]
SIP.Local.IP 127.0.0.1 [default]
SIP.Local.Port 5062 [default]
SIP.Proxy.Registration 127.0.0.1:5064 [default]
SIP.Proxy.SMS 127.0.0.1:5063 [default]
SIP.Proxy.Speech 127.0.0.1:5060 [default]
SIP.Proxy.USSD (disabled) [default]
SIP.RFC3428.NoTrying 0 [default]
SIP.SMSC smsc [default]
SMS.FakeSrcSMSC 0000 [default]
SMS.MIMEType application/vnd.3gpp.sms [default]
TRX.IP 127.0.0.1 [default]
OpenBTS>
On Sat, Oct 11, 2014 at 3:43 PM, Rene Stoutjesdijk <r.s...@gm...>
wrote:
> Hello,
> i did get it to work. It seems that the ettus box is working under the
> assumption that the openbts is running on 192.168.10.1 and the ettus
itself
> was on 192.168.10.2.
>
> So i've adopted my ubuntu 14.04 to work on ip address 192.168.10.1 and
then
> it started to work :) :).
>
> But still i do have a few questions:
>
> - how can the ip addressing of the ettus be changed?
> - i've activated the open registration for my imsi code and when i do
> request for tmsis i do see (i've changed the last 4 digits to X) :
> (yes it's a vodafone sim from the netherlands :) )
>
> OpenBTS> tmsis
>
> IMSI TMSI IMEI AUTH CREATED ACCESSED TMSI_ASSIGNED
>
> 20404557014XXXX - 01355200565XXXX 2 113m 113m 0
>
>
>
> OpenBTS>
>
>
> - is this sufficient to proceed with activating GPRS (i only do need gprs
:)
> )? or am i still missing something?
> - for the GPRS enablement i do see in the manual that i've to set gprs to
> enable ,that's pretty straightforward, but i'm struggling with the IP
setup.
> In the config it's assumed (by default) that the MS are in 192.168.99.0/24
> subnet and that the default gw is 192.168.99.1, I do assume that's meaning
> i've to configure this address also on the ubuntu device or is this
already
> assigned internally within Openbts to an internal interface?
>
>
>
> wkr
> rene
>
>
>
> On Sat, Oct 11, 2014 at 10:45 AM, Rene Stoutjesdijk
> <r.s...@gm...> wrote:
>>
>> After reading carefully the previous emails i've changed the env
settings,
>> so have done a reconfigure of the locales and set the env by:
>>
>> export LC_CTYPE=C.UTF-8
>>
>>
>> i think this last part did clear the errors.
>>
>> Then i cleaned the complete installation and started from scratch
>> according to buildinstallrun diagram.
>>
>> The only thing which didn't match from the installation part was that
>> according to the manual for a53 i should go to the dir a53/trunk.
>>
>> This dir doesn't exist so did go to liba53 and did the make from there :)
>>
>>
>> the other thing is that in the url:
>> http://openbts.org/w/index.php/RadioIntegration#Universal_Hardware_Driver
i
>> didn't execute the following part:
>>
>> QUOTE
>>
>>
>> To enable support for UHD devices regardless of type,
>>
>> cd openbts/trunk
>> autoreconf -i
>> ./configure --with-uhd
>> make
>>
>> Create a symbolic link to the built Transceiver52M executable.
>>
>> #(from OpenBTS root)
>> cd apps
>> ln -s ../Transceiver52M/transceiver .
>>
>>
>>
>> UNQUOTE
>>
>>
>> Or is this required? and if yes, to which dir should i change, as
>> openbts/trunk doesn't exist
>>
>>
>> i still do see some warnings during the rest of the installation, but yes
>> they look like warnings only, so that's promising.
>>
>>
>>
>> But still i don't get to see the N210. and can't get to the openbtscli,
>> see commands and output below.
>>
>> Is somebody having an advice for me how to resolve?? (or even better is
>> there a vmware image available).
>>
>>
>> commands and output below:
>>
>>
>>
>> openbts@openbts:~/dev/openbts/apps$ uhd_usrp_probe
>>
>> linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.007.002-90-unstable
>>
>>
>> Error: LookupError: KeyError: No devices found for ----->
>>
>> Empty Device Address
>>
>> openbts@openbts:~/dev/openbts/apps$ sudo ./OpenBTSCLI
>>
>> OpenBTS Command Line Interface (CLI) utility
>>
>> Copyright 2012, 2013, 2014 Range Networks, Inc.
>>
>> Licensed under GPLv2.
>>
>> Includes libreadline, GPLv2.
>>
>> Connecting to 127.0.0.1:49300...
>>
>> connect stream socket: Connection refused
>>
>> Is OpenBTS running?
>>
>> openbts@openbts:~/dev/openbts/apps$ sudo ./OpenBTS
>>
>> CRIT 2486:2486 2014-10-11T10:09:52.6 SelfDetect.cpp:68:RegisterProgram:
>> *** An instance of /OpenBTS is already running.
>>
>> CRIT 2486:2486 2014-10-11T10:09:52.6 SelfDetect.cpp:69:RegisterProgram:
>> *** If this is not the case, deleting this file will allow /OpenBTS to
>> start: /var/run//OpenBTS.pid exiting...
>>
>> openbts@openbts:~/dev/openbts/apps$ sudo netstat -an
>>
>> Active Internet connections (servers and established)
>>
>> Proto Recv-Q Send-Q Local Address Foreign Address
State
>>
>> tcp 0 0 127.0.0.1:953 0.0.0.0:*
LISTEN
>>
>> tcp 0 0 127.0.0.1:45063 0.0.0.0:*
LISTEN
>>
>> tcp 0 0 127.0.0.1:45064 0.0.0.0:*
LISTEN
>>
>> tcp 0 0 192.168.1.128:53 0.0.0.0:*
LISTEN
>>
>> tcp 0 0 127.0.0.1:53 0.0.0.0:*
LISTEN
>>
>> tcp 0 0 0.0.0.0:22 0.0.0.0:*
LISTEN
>>
>> tcp 0 0 192.168.1.128:22 192.168.1.110:54398
>> ESTABLISHED
>>
>> tcp6 0 0 ::1:953 :::*
LISTEN
>>
>> tcp6 0 0 :::53 :::*
LISTEN
>>
>> tcp6 0 0 :::22 :::*
LISTEN
>>
>> udp 0 0 0.0.0.0:42905 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:5060 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:5063 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:5064 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:4569 0.0.0.0:*
>>
>> udp 0 0 192.168.1.128:53 0.0.0.0:*
>>
>> udp 0 0 127.0.0.1:53 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:68 0.0.0.0:*
>>
>> udp 0 0 192.168.1.128:123 0.0.0.0:*
>>
>> udp 0 0 127.0.0.1:123 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:123 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:16001 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:5800 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:5801 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:5802 0.0.0.0:*
>>
>> udp 0 0 0.0.0.0:14158 0.0.0.0:*
>>
>> udp6 0 0 :::53 :::*
>>
>> udp6 0 0 fe80::20c:29ff:fe85:123 :::*
>>
>> udp6 0 0 ::1:123 :::*
>>
>> udp6 0 0 :::123 :::*
>>
>> udp6 0 0 :::56038 :::*
>>
>> Active UNIX domain sockets (servers and established)
>>
>> Proto RefCnt Flags Type State I-Node Path
>>
>> unix 13 [ ] DGRAM 8453 /dev/log
>>
>> unix 2 [ ACC ] STREAM LISTENING 11064
>> /var/run/acpid.socket
>>
>> unix 2 [ ACC ] STREAM LISTENING 11106
>> /var/run/asterisk/asterisk.ctl
>>
>> unix 2 [ ACC ] STREAM LISTENING 7840
>> @/com/ubuntu/upstart
>>
>> unix 2 [ ACC ] STREAM LISTENING 8388
>> /var/run/dbus/system_bus_socket
>>
>> unix 2 [ ACC ] SEQPACKET LISTENING 8172
>> /run/udev/control
>>
>> unix 2 [ ] DGRAM 19147
>>
>> unix 3 [ ] STREAM CONNECTED 13504
>> /var/run/dbus/system_bus_socket
>>
>> unix 2 [ ] DGRAM 11134
>>
>> unix 3 [ ] STREAM CONNECTED 8157
>> @/com/ubuntu/upstart
>>
>> unix 2 [ ] DGRAM 13080
>>
>> unix 2 [ ] DGRAM 14188
>>
>> unix 3 [ ] DGRAM 8210
>>
>> unix 2 [ ] DGRAM 19124
>>
>> unix 3 [ ] STREAM CONNECTED 8426
>> /var/run/dbus/system_bus_socket
>>
>> unix 3 [ ] STREAM CONNECTED 8390
>> @/com/ubuntu/upstart
>>
>> unix 3 [ ] STREAM CONNECTED 10453
>>
>> unix 2 [ ] DGRAM 11346
>>
>> unix 2 [ ] DGRAM 8614
>>
>> unix 3 [ ] STREAM CONNECTED 8407
>>
>> unix 3 [ ] STREAM CONNECTED 10471
>> @/com/ubuntu/upstart
>>
>> unix 3 [ ] STREAM CONNECTED 8518
>>
>> unix 2 [ ] STREAM CONNECTED 19145
>>
>> unix 2 [ ] DGRAM 11059
>>
>> unix 3 [ ] STREAM CONNECTED 13496
>>
>> unix 2 [ ] DGRAM 11349
>>
>> unix 3 [ ] STREAM CONNECTED 13503
>>
>> unix 3 [ ] DGRAM 8211
>>
>> unix 3 [ ] STREAM CONNECTED 8147
>>
>> unix 3 [ ] STREAM CONNECTED 8408
>>
>> unix 3 [ ] STREAM CONNECTED 8368
>>
>> unix 2 [ ] DGRAM 11123
>>
>> unix 3 [ ] STREAM CONNECTED 8425
>>
>> unix 3 [ ] STREAM CONNECTED 13497
>>
>> unix 3 [ ] STREAM CONNECTED 8519
>> /var/run/dbus/system_bus_socket
>>
>> unix 2 [ ] DGRAM 8455
>>
>> openbts@openbts:~/dev/openbts/apps$
>>
>>
>>
>>
>> it also looks like OpenBTS is permanently changing his proces id, i also
>> did see the following messages in the var/log/syslog file:
>>
>>
>> QUOTE
>>
>>
>>
>> Oct 11 10:34:23 openbts openbts: EMERG 8146:8158 2014-10-11T10:34:23.2
>> OpenBTS.cpp:185:startTransceiver: Transceiver quit with status 256.
Exiting.
>>
>> Oct 11 10:34:23 openbts openbts: NOTICE 8146:8158 2014-10-11T10:34:23.2
>> SelfDetect.cpp:113:Exit: *** Terminating because of signal -999
>>
>> Oct 11 10:34:23 openbts openbts: NOTICE 8146:8158 2014-10-11T10:34:23.2
>> SelfDetect.cpp:120:Exit: *** Terminating ./OpenBTS
>>
>> Oct 11 10:34:23 openbts openbts: NOTICE 8146:8158 2014-10-11T10:34:23.2
>> SelfDetect.cpp:127:Exit: *** Removing pid file /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:23 openbts OpenBTS: opening configuration table from path
>> /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:23 openbts openbts: opening reporting table from path
>> /var/log/OpenBTSStats.db
>>
>> Oct 11 10:34:23 openbts openbts: NOTICE 8170:8170 2014-10-11T10:34:23.2
>> SelfDetect.cpp:62:RegisterProgram: *** Registering program ./OpenBTS to
>> /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:23 openbts openbts: ALERT 8170:8170 2014-10-11T10:34:23.3
>> OpenBTS.cpp:600:main: OpenBTS (re)starting, ver 5.0.0-prealpha build
>> date/time 2014-10-10T19:13:17
>>
>> Oct 11 10:34:23 openbts openbts: ALERT 8170:8170 2014-10-11T10:34:23.3
>> OpenBTS.cpp:601:main: OpenBTS reading config file /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:23 openbts openbts: NOTICE 8170:8170 2014-10-11T10:34:23.3
>> GSMConfig.cpp:132:regenerateBeacon: regenerating system information
>> messages, changemark 1
>>
>> Oct 11 10:34:24 openbts openbts: WARNING 8170:8170 2014-10-11T10:34:24.3
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 1
>>
>> Oct 11 10:34:25 openbts openbts: WARNING 8170:8170 2014-10-11T10:34:25.3
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 2
>>
>> Oct 11 10:34:26 openbts openbts: WARNING 8170:8170 2014-10-11T10:34:26.3
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 3
>>
>> Oct 11 10:34:27 openbts openbts: WARNING 8170:8170 2014-10-11T10:34:27.3
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 4
>>
>> Oct 11 10:34:28 openbts openbts: WARNING 8170:8170 2014-10-11T10:34:28.3
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 5
>>
>> Oct 11 10:34:28 openbts openbts: NOTICE 8170:8170 2014-10-11T10:34:28.3
>> TRXManager.cpp:307:sendCommandPacket: lost control link to transceiver
>>
>> Oct 11 10:34:28 openbts openbts: ALERT 8170:8181 2014-10-11T10:34:28.3
>> OpenBTS.cpp:174:startTransceiver: starting transceiver ./transceiver
with 1
>> ARFCNs
>>
>> Oct 11 10:34:28 openbts transceiver: opening configuration table from
path
>> /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:28 openbts transceiver: ALERT 8184:8184
2014-10-11T10:34:28.6
>> UHDDevice.cpp:528:open: No UHD devices found with address ''
>>
>> Oct 11 10:34:28 openbts transceiver: ALERT 8184:8184
2014-10-11T10:34:28.6
>> runTransceiver.cpp:160:main: Transceiver exiting...
>>
>> Oct 11 10:34:28 openbts openbts: EMERG 8170:8181 2014-10-11T10:34:28.6
>> OpenBTS.cpp:185:startTransceiver: Transceiver quit with status 256.
Exiting.
>>
>> Oct 11 10:34:28 openbts openbts: NOTICE 8170:8181 2014-10-11T10:34:28.6
>> SelfDetect.cpp:113:Exit: *** Terminating because of signal -999
>>
>> Oct 11 10:34:28 openbts openbts: NOTICE 8170:8181 2014-10-11T10:34:28.6
>> SelfDetect.cpp:120:Exit: *** Terminating ./OpenBTS
>>
>> Oct 11 10:34:28 openbts openbts: NOTICE 8170:8181 2014-10-11T10:34:28.6
>> SelfDetect.cpp:127:Exit: *** Removing pid file /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:28 openbts OpenBTS: opening configuration table from path
>> /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:28 openbts openbts: opening reporting table from path
>> /var/log/OpenBTSStats.db
>>
>> Oct 11 10:34:28 openbts openbts: NOTICE 8193:8193 2014-10-11T10:34:28.6
>> SelfDetect.cpp:62:RegisterProgram: *** Registering program ./OpenBTS to
>> /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:28 openbts openbts: ALERT 8193:8193 2014-10-11T10:34:28.6
>> OpenBTS.cpp:600:main: OpenBTS (re)starting, ver 5.0.0-prealpha build
>> date/time 2014-10-10T19:13:17
>>
>> Oct 11 10:34:28 openbts openbts: ALERT 8193:8193 2014-10-11T10:34:28.6
>> OpenBTS.cpp:601:main: OpenBTS reading config file /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:28 openbts openbts: NOTICE 8193:8193 2014-10-11T10:34:28.7
>> GSMConfig.cpp:132:regenerateBeacon: regenerating system information
>> messages, changemark 2
>>
>> Oct 11 10:34:29 openbts openbts: WARNING 8193:8193 2014-10-11T10:34:29.7
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 1
>>
>> Oct 11 10:34:30 openbts openbts: WARNING 8193:8193 2014-10-11T10:34:30.7
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 2
>>
>> Oct 11 10:34:31 openbts openbts: WARNING 8193:8193 2014-10-11T10:34:31.7
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 3
>>
>> Oct 11 10:34:32 openbts openbts: WARNING 8193:8193 2014-10-11T10:34:32.7
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 4
>>
>> Oct 11 10:34:33 openbts openbts: WARNING 8193:8193 2014-10-11T10:34:33.7
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 5
>>
>> Oct 11 10:34:33 openbts openbts: NOTICE 8193:8193 2014-10-11T10:34:33.7
>> TRXManager.cpp:307:sendCommandPacket: lost control link to transceiver
>>
>> Oct 11 10:34:33 openbts openbts: ALERT 8193:8201 2014-10-11T10:34:33.7
>> OpenBTS.cpp:174:startTransceiver: starting transceiver ./transceiver
with 1
>> ARFCNs
>>
>> Oct 11 10:34:33 openbts transceiver: opening configuration table from
path
>> /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:34 openbts transceiver: ALERT 8204:8204
2014-10-11T10:34:34.1
>> UHDDevice.cpp:528:open: No UHD devices found with address ''
>>
>> Oct 11 10:34:34 openbts transceiver: ALERT 8204:8204
2014-10-11T10:34:34.1
>> runTransceiver.cpp:160:main: Transceiver exiting...
>>
>> Oct 11 10:34:34 openbts openbts: EMERG 8193:8201 2014-10-11T10:34:34.1
>> OpenBTS.cpp:185:startTransceiver: Transceiver quit with status 256.
Exiting.
>>
>> Oct 11 10:34:34 openbts openbts: NOTICE 8193:8201 2014-10-11T10:34:34.1
>> SelfDetect.cpp:113:Exit: *** Terminating because of signal -999
>>
>> Oct 11 10:34:34 openbts openbts: NOTICE 8193:8201 2014-10-11T10:34:34.1
>> SelfDetect.cpp:120:Exit: *** Terminating ./OpenBTS
>>
>> Oct 11 10:34:34 openbts openbts: NOTICE 8193:8201 2014-10-11T10:34:34.1
>> SelfDetect.cpp:127:Exit: *** Removing pid file /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:34 openbts OpenBTS: opening configuration table from path
>> /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:34 openbts openbts: opening reporting table from path
>> /var/log/OpenBTSStats.db
>>
>> Oct 11 10:34:34 openbts openbts: NOTICE 8213:8213 2014-10-11T10:34:34.1
>> SelfDetect.cpp:62:RegisterProgram: *** Registering program ./OpenBTS to
>> /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:34 openbts openbts: ALERT 8213:8213 2014-10-11T10:34:34.1
>> OpenBTS.cpp:600:main: OpenBTS (re)starting, ver 5.0.0-prealpha build
>> date/time 2014-10-10T19:13:17
>>
>> Oct 11 10:34:34 openbts openbts: ALERT 8213:8213 2014-10-11T10:34:34.1
>> OpenBTS.cpp:601:main: OpenBTS reading config file /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:34 openbts openbts: NOTICE 8213:8213 2014-10-11T10:34:34.1
>> GSMConfig.cpp:132:regenerateBeacon: regenerating system information
>> messages, changemark 3
>>
>> Oct 11 10:34:35 openbts openbts: WARNING 8213:8213 2014-10-11T10:34:35.1
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 1
>>
>> Oct 11 10:34:36 openbts openbts: WARNING 8213:8213 2014-10-11T10:34:36.1
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 2
>>
>> Oct 11 10:34:37 openbts openbts: WARNING 8213:8213 2014-10-11T10:34:37.1
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 3
>>
>> Oct 11 10:34:38 openbts openbts: WARNING 8213:8213 2014-10-11T10:34:38.1
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 4
>>
>> Oct 11 10:34:39 openbts openbts: WARNING 8213:8213 2014-10-11T10:34:39.1
>> TRXManager.cpp:292:sendCommandPacket: TRX link timeout on attempt 5
>>
>> Oct 11 10:34:39 openbts openbts: NOTICE 8213:8213 2014-10-11T10:34:39.1
>> TRXManager.cpp:307:sendCommandPacket: lost control link to transceiver
>>
>> Oct 11 10:34:39 openbts openbts: ALERT 8213:8221 2014-10-11T10:34:39.1
>> OpenBTS.cpp:174:startTransceiver: starting transceiver ./transceiver
with 1
>> ARFCNs
>>
>> Oct 11 10:34:39 openbts transceiver: opening configuration table from
path
>> /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:39 openbts transceiver: ALERT 8224:8224
2014-10-11T10:34:39.5
>> UHDDevice.cpp:528:open: No UHD devices found with address ''
>>
>> Oct 11 10:34:39 openbts transceiver: ALERT 8224:8224
2014-10-11T10:34:39.5
>> runTransceiver.cpp:160:main: Transceiver exiting...
>>
>> Oct 11 10:34:39 openbts openbts: EMERG 8213:8221 2014-10-11T10:34:39.5
>> OpenBTS.cpp:185:startTransceiver: Transceiver quit with status 256.
Exiting.
>>
>> Oct 11 10:34:39 openbts openbts: NOTICE 8213:8221 2014-10-11T10:34:39.5
>> SelfDetect.cpp:113:Exit: *** Terminating because of signal -999
>>
>> Oct 11 10:34:39 openbts openbts: NOTICE 8213:8221 2014-10-11T10:34:39.5
>> SelfDetect.cpp:120:Exit: *** Terminating ./OpenBTS
>>
>> Oct 11 10:34:39 openbts openbts: NOTICE 8213:8221 2014-10-11T10:34:39.5
>> SelfDetect.cpp:127:Exit: *** Removing pid file /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:39 openbts OpenBTS: opening configuration table from path
>> /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:39 openbts openbts: opening reporting table from path
>> /var/log/OpenBTSStats.db
>>
>> Oct 11 10:34:39 openbts openbts: NOTICE 8233:8233 2014-10-11T10:34:39.5
>> SelfDetect.cpp:62:RegisterProgram: *** Registering program ./OpenBTS to
>> /var/run//OpenBTS.pid
>>
>> Oct 11 10:34:39 openbts openbts: ALERT 8233:8233 2014-10-11T10:34:39.5
>> OpenBTS.cpp:600:main: OpenBTS (re)starting, ver 5.0.0-prealpha build
>> date/time 2014-10-10T19:13:17
>>
>> Oct 11 10:34:39 openbts openbts: ALERT 8233:8233 2014-10-11T10:34:39.5
>> OpenBTS.cpp:601:main: OpenBTS reading config file /etc/OpenBTS/OpenBTS.db
>>
>> Oct 11 10:34:39 openbts openbts: NOTICE 8233:8233 2014-10-11T10:34:39.5
>> GSMConfig.cpp:132:regenerateBeacon: regenerating system information
>> messages, changemark 4
>>
>>
>>
>> UNQUOTE
>>
>>
>>
>> All help is appreciated.
>>
>>
>> wkr
>>
>> rene
>>
>>
>>
>>
>> On Sat, Oct 11, 2014 at 8:55 AM, Rene Stoutjesdijk
>> <r.s...@gm...> wrote:
>>>
>>> Hi Ralph,
>>> yes the vmware ethernet setup is working as a bridged setup.
>>>
>>> The server is connected to a gigabit switch. The server can communicate
>>> to the other devices on the same vlan/ip subnet.
>>> The ettus box is attached to a dedicated ethernet port on the same
>>> switch, this port is synced as 1 Gb so that's looking fine. The odd
thing is
>>> however that i don't see a mac address on that port of the switch (is
that
>>> normal?).
>>>
>>> Also when i do a tcpdump on the eth0 of the ubuntu then i don't see any
>>> ethernet packet outgoing, and i was expecting to see (i think) outgoing
>>> packets to do the discovery of the ettus box? Or should the ettus box
>>> broadcast it's presence?
>>>
>>>
>>>
>>> On Sat, Oct 11, 2014 at 5:42 AM, Ralph A. Schmid, dk5ras
>>> <ra...@sc...> wrote:
>>>>
>>>> Did you enable direct access to the Ethernet interface? Guess It won’t
>>>> work through NAT with a N series radio…
>>>>
>>>>
>>>>
>>>> Ralph.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> From: Rene Stoutjesdijk [mailto:r.s...@gm...]
>>>> Sent: Friday, 10 October, 2014 22:08
>>>> To: Tom Tsou
>>>> Cc: ope...@li...
>>>> Subject: Re: [Openbts-discuss] uhd_usrp_probe
>>>>
>>>>
>>>>
>>>> and when trying it on the console window of ubuntu (within vmware) then
>>>> i don't get the errors but still it doesn't find the ettus N210 :(
>>>>
>>>>
>>>>
>>>> On Fri, Oct 10, 2014 at 9:41 PM, Rene Stoutjesdijk
>>>> <r.s...@gm...> wrote:
>>>>
>>>> Hi Tom,
>>>>
>>>>
>>>>
>>>> see output below:
>>>>
>>>>
>>>>
>>>> openbts@openbts:~$ locale
>>>>
>>>> locale: Cannot set LC_CTYPE to default locale: No such file or
directory
>>>>
>>>> locale: Cannot set LC_ALL to default locale: No such file or directory
>>>>
>>>> LANG=en_US.UTF-8
>>>>
>>>> LANGUAGE=en_US:en
>>>>
>>>> LC_CTYPE=UTF-8
>>>>
>>>> LC_NUMERIC="en_US.UTF-8"
>>>>
>>>> LC_TIME="en_US.UTF-8"
>>>>
>>>> LC_COLLATE="en_US.UTF-8"
>>>>
>>>> LC_MONETARY="en_US.UTF-8"
>>>>
>>>> LC_MESSAGES="en_US.UTF-8"
>>>>
>>>> LC_PAPER="en_US.UTF-8"
>>>>
>>>> LC_NAME="en_US.UTF-8"
>>>>
>>>> LC_ADDRESS="en_US.UTF-8"
>>>>
>>>> LC_TELEPHONE="en_US.UTF-8"
>>>>
>>>> LC_MEASUREMENT="en_US.UTF-8"
>>>>
>>>> LC_IDENTIFICATION="en_US.UTF-8"
>>>>
>>>> LC_ALL=
>>>>
>>>> openbts@openbts:~$
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Fri, Oct 10, 2014 at 8:25 PM, Tom Tsou <to...@ts...> wrote:
>>>>
>>>> On Fri, Oct 10, 2014 at 11:05 AM, Rene Stoutjesdijk
>>>> <r.s...@gm...> wrote:
>>>> > openbts@openbts:~$ uhd_usrp_probe
>>>> >
>>>> > Exception in static block
>>>> >
>>>> >
__register___convert_sc16_item32_le_1_fc64_1_PRIORITY_SIMD_PRIORITY_SIMD
>>>> >
>>>> > locale::facet::_S_create_c_locale name not valid
>>>>
>>>> These error appear to be related to boost::filesystem.
>>>>
>>>> What is the output of the locale utility?
>>>>
>>>> $ locale
>>>>
>>>> -TT
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>
|