Re: [Openbts-discuss] How to set RxGain in GPRS branch?

[oxccoxcc o. <oxc...@ya...>]

I tried to set GSM.MS.Power.Max to 1 and GSM.MS.Power.Min to 1. But RSSI value is still high (about -25 for WBX, -15 for SBX).
Tried to change WBX daughterboard to SBX. Receive burst quality is also bad and not all of them can be resolved. It looks like a wavy process.
At some time bursts have an ideal quality. At another time they are broken. Periodically they are broken partially, for eaxample: (10100...11100110010100--------------...--)
I also tried to change ARFCN, but it didn`t help. Before i checked this arfcn with uhd_fft.
One thing, that looks some strange is a timing value=2.00391. This value is constantly at all sessions for PDTCH channel and 2 symbols offset is looks too high for phone, that places near USRP.  

24.06.2013, 17:00, "Gullik Webjörn" <gul...@co...>:
> Maybe a moot point, but I think it is not a B100 problem if
> exactness is the issue, but rather a WBX issue.
>
> The same thing should happen on another USRP equipped with WBX,
> if RxGain is left at +47 dB.
>
> Regards,
>
> Gullik
>
> On 06/24/2013 12:59 PM, oxccoxcc oxccoxcc wrote:
>
>>  According to USRP B100 RxGain problem, i set GSM.Radio.RxGain to 7dB. After that not RACH bursts have an RSSI value about -80 - -87 and normal quality.
>>  But when i starting GPRS and connect to web page, receive bursts RSSI grow to -10 - -15. And, because of that, receive bursts have a bad quality and most of them can`t be resolved.
>>
>>  ------------------------------------------------------------------------------
>>  This SF.net email is sponsored by Windows:
>>
>>  Build for Windows Store.
>>
>>  http://p.sf.net/sfu/windows-dev2dev
>>  _______________________________________________
>>  Openbts-discuss mailing list
>>  Ope...@li...
>>  https://lists.sourceforge.net/lists/listinfo/openbts-discuss