[Openbts-discuss] running OpenBTS 2.6 with usrp2

[Νίκος Β. <ver...@gm...>]

Hello
I'm trying to run OpenBTS 2.6 with a usrp2 on fedora 16 with binary uhd
from ettus and gnuradio 3.6...
and i get this error...
1334825573.6080 INFO 3062840128
MobilityManagement.cpp:140:LocationUpdatingController: MM Location Updating
Request LAI=(MCC=xxx MNC=xx LAC=0xXX) MobileIdentity=(TMSI=0xXXXXXXXXX)
classmark=(revision=1 ES-IND=1 A5/1=0 powerCap=3)
1334825573.6081 ERROR 3062840128 GSML2LAPDm.cpp:920:sendMultiframeData:
obj: 0x9e67ae0 attempt to send DATA on released LAPm channel
1334825574.2939 NOTICE 3064437568 ControlCommon.cpp:1150:getMessage:
unexpected primitive RELEASE
1334825574.2943 NOTICE 3064437568 DCCHDispatch.cpp:148:DCCHDispatcher:
UnexpectedPrimitive
1334825574.2945 ERROR 3064437568 GSML2LAPDm.cpp:920:sendMultiframeData:
obj: 0x9e62d00 attempt to send DATA on released LAPm channel
1334825574.3121 NOTICE 3062840128 ControlCommon.cpp:1150:getMessage:
unexpected primitive ERROR
1334825574.3122 NOTICE 3062840128 DCCHDispatch.cpp:148:DCCHDispatcher:
UnexpectedPrimitive
1334825574.3123 ERROR 3062840128 GSML2LAPDm.cpp:920:sendMultiframeData:
obj: 0x9e67ae0 attempt to send DATA on released LAPm channel

any idea?
Sould i try OpenBTS 2.8?
PS. I didn't connect external clk ref.

PS2. when i try to start USRPping i get this seg fault...
linux; GNU C++ version 4.6.3 20120306 (Red Hat 4.6.3-2); Boost_104700;
UHD_003.004.001-39-unstable

1334826014.7919 FORCE 3078252288 Logger.cpp:196:gLogInit: Setting initial
global logging level to INFO
1334826015.1261 INFO 3078252288 UHDDevice.cpp:439:open: Using discovered
UHD device type=usrp2,addr=192.168.10.2,name=,serial=1616
1334826015.3598 INFO 3078252288 UHDDevice.cpp:258:uhd_msg_handler: Opening
a USRP2/N-Series device...

1334826015.3964 INFO 3078252288 UHDDevice.cpp:258:uhd_msg_handler: Current
recv frame size: 1472 bytes

1334826015.3965 INFO 3078252288 UHDDevice.cpp:258:uhd_msg_handler: Current
send frame size: 1472 bytes

1334826016.0251 INFO 3078252288 UHDDevice.cpp:419:parse_dev_type: Using
network bus for USRP2 / N-Series Device
1334826016.0519 WARN 3078252288 UHDDevice.cpp:261:uhd_msg_handler: The
hardware does not support the requested TX sample rate:
Target sample rate: 0.270833 MSps
Actual sample rate: 0.271739 MSps

1334826016.0552 WARN 3078252288 UHDDevice.cpp:261:uhd_msg_handler: The
hardware does not support the requested RX sample rate:
Target sample rate: 0.270833 MSps
Actual sample rate: 0.271739 MSps

1334826016.0553 ALARM 3078252288 UHDDevice.cpp:357:set_rates: Actual sample
rate differs from desired rate
1334826016.0553 ALARM 3078252288 UHDDevice.cpp:357:set_rates: Actual sample
rate differs from desired rate
1334826016.0654 INFO 3078252288 UHDDevice.cpp:746:setTxFreq:
Tune Result:
    Target RF  Freq: 1990.000000 (MHz)
    Actual RF  Freq: 1989.996947 (MHz)
    Target DSP Freq: 0.003053 (MHz)
    Actual DSP Freq: 0.003053 (MHz)

1334826016.0751 INFO 3078252288 UHDDevice.cpp:755:setRxFreq:
Tune Result:
    Target RF  Freq: 1990.000000 (MHz)
    Actual RF  Freq: 1989.996947 (MHz)
    Target DSP Freq: -0.003053 (MHz)
    Actual DSP Freq: -0.003053 (MHz)

1334826016.0761 INFO 3078252288 UHDDevice.cpp:529:start: Starting USRP...
1334826016.1083 INFO 3078252288 UHDDevice.cpp:546:start: The current time
is 0.0046 seconds
1334826016.1084 INFO 3078252288 USRPping.cpp:55:main: Looping...
Segmentation fault (core dumped)

thanks a lot.

./Vervelak


-- 
"The quieter you become, the more you are able to hear..."