[mxbb-commits] mx_phpbb2admin/language/lang_swedish index.htm, NONE, 1.1 lang_admin.php, NONE, 1.1

[Jon O. <jon...@us...>]

Update of /cvsroot/mxbb/mx_phpbb2admin/language/lang_swedish
In directory sc8-pr-cvs16.sourceforge.net:/tmp/cvs-serv31175

Added Files:
	index.htm lang_admin.php 
Log Message:
swedish...
fyi, as agreed, i'm allowed to keep these in the cvs, but they are to be dropped when releasing...

--- NEW FILE: lang_admin.php ---
<?php
/**
*
* @package mxBB Portal Module - mx_phpbb2admin
* @version $Id: lang_admin.php,v 1.1 2008/02/13 21:21:56 jonohlsson Exp $
* @copyright (c) 2002-2006 [Adam Alkins (http://www.rasadam.com), Jon Ohlsson] mxBB Project Team
* @license http://opensource.org/licenses/gpl-license.php GNU General Public License v2
* @link http://www.mxbb.net
*
*/

//
// adminCP index
//
$lang['phpbb2admin'] = 'Användare och Grupper';
$lang['1_phpbb2admin_Userlist'] = 'Användare';
$lang['2_phpbb2admin_Groups'] = 'Grupper';
$lang['3_Prune_Inactive_Users'] = 'Rensa användare';
$lang['4_Prune_user_posts'] = 'Rensa inlägg';

//
// User Management
//
$lang['User_admin'] = "Användaradministration";
$lang['User_admin_explain'] = "Här kan du ändra dina användares information och vissa specifika tillval. För att ändra användarens rättigheter så använd i användare och grupp rättigheter.";

$lang['Look_up_user'] = "Slå upp användare";

$lang['Admin_user_fail'] = "Kan inte uppdatera användarens profil.";
$lang['Admin_user_updated'] = "Användarens profil uppdaterades.";
$lang['Admin_user_added'] = "Användaren skapades.";
$lang['Click_return_useradmin'] = "Klicka %shär%s för att återgå till användaradministrationen";

$lang['User_delete'] = "Radera denna användare";
$lang['User_delete_explain'] = "Klicka här för att radera denna användare, detta går inte att ångra.";
$lang['User_deleted'] = "Användaren togs bort.";

$lang['User_status'] = "Användaren är aktiv";
$lang['User_allowpm'] = "Kan skicka personliga meddelanden";
$lang['User_allowavatar'] = "Kan visa avatar";

$lang['Admin_avatar_explain'] = "Här kan du visa och radera användarens aktuella avatar.";

$lang['User_special'] = "Speciella admin fält";
$lang['User_special_explain'] = "Dessa fält kan inte ändras av användarna.  Här kan du sätta status och andra tillägg (val?) som inte finns tillgängliga för användaren.";


//
// Group Management
//
$lang['No_group_action'] = 'Inget alternativ angavs';
$lang['Group_administration'] = "Grupp administration";
$lang['Group_admin_explain'] = "Via denna panel kan du administrera alla dina användaregrupper, du kan; radera, skapa nya och redigera existerande grupper. Du kan välja moderatorer, ändra öppen/stängd status och sätta gruppnamn och beskrivning";
$lang['Error_updating_groups'] = "Det uppstod ett fel när grupperna skulle uppdateras";
$lang['Updated_group'] = "Gruppen är uppdaterad";
$lang['Added_new_group'] = "Den nya gruppen är skapad";
$lang['Deleted_group'] = "Gruppen är raderad";
$lang['New_group'] = "Skapa ny grupp";
$lang['Edit_group'] = "Redigera grupp";
$lang['group_name'] = "Gruppnamn";
$lang['group_description'] = "Gruppbeskrivning";
$lang['group_moderator'] = "Gruppmoderator";
$lang['group_status'] = "Gruppstatus";
$lang['group_open'] = "Öppen grupp";
$lang['group_closed'] = "Stängd grupp";
$lang['group_hidden'] = "Dold grupp";
$lang['group_delete'] = "Radera grupp";
$lang['group_delete_check'] = "Radera denna grupp";
$lang['submit_group_changes'] = "Skicka ändringar";
$lang['reset_group_changes'] = "Återställ ändringar";
$lang['No_group_name'] = "Du måste ange ett namn på gruppen";
$lang['No_group_moderator'] = "Du åste ange en moderator för gruppen";
$lang['No_group_mode'] = "Du måste ange ett läge för gruppen, öppen eller stängd";
$lang['delete_group_moderator'] = "Radera den gamla grupp moderatorn?";
$lang['delete_moderator_explain'] = "Om du ändrar grupp moderator, klicka i rutan för att radera den gamla moderatorn från gruppen.  Annars klicka inte i rutan så kommer den gamla moderatorn att bli en normal medlem i gruppen";
$lang['Click_return_groupsadmin'] = "Klicka %shär%s för att återgå till grupp administration.";
$lang['Select_group'] = "Välj en grupp";
$lang['Look_up_group'] = "Hantera grupp";
$lang['Look_up_groupcp'] = "Hantera gruppmedlemmar";

//
// Admin Userlist
//
$lang['Userlist'] = 'User list';
$lang['Userlist_description'] = 'View a complete list of your users and perform various actions on them';

$lang['Add_group'] = 'Add to a Group';
$lang['Add_group_explain'] = 'Select which group to add the selected users to';

$lang['Open_close'] = 'Open/Close';
$lang['Active'] = 'Active';
$lang['Group'] = 'Group(s)';
$lang['Rank'] = 'Rank';
$lang['Last_activity'] = 'Last Activity';
$lang['Never'] = 'Never';
$lang['User_manage'] = 'Manage';
$lang['Find_all_posts'] = 'Find All Posts';

$lang['Select_one'] = 'Select One';
$lang['Ban'] = 'Ban';
$lang['Activate_deactivate'] = 'Activate/De-activate';

$lang['User_id'] = 'User id';
$lang['User_level'] = 'User Level';
$lang['Ascending'] = 'Ascending';
$lang['Descending'] = 'Descending';
$lang['Show'] = 'Show';
$lang['All'] = 'All';

$lang['Member'] = 'Member';
$lang['Pending'] = 'Pending';

$lang['Confirm_user_ban'] = 'Are you sure you want to ban the selected user(s)?';
$lang['Confirm_user_deleted'] = 'Are you sure you want to detele the selected user(s)?';

$lang['User_status_updated'] = 'User(s) status updated successfully!';
$lang['User_banned_successfully'] = 'User(s) banned successfully!';
$lang['User_deleted_successfully'] = 'User(s) deleted successfully!';
$lang['User_add_group_successfully'] = 'User(s) added to group successfully!';

$lang['Click_return_userlist'] = 'Click %shere%s to return to the User List';

//
// Pruning
//
$lang['Prune_user_posts'] = 'Prune User Posts';
$lang['Prune_explain'] = 'Welcome to the prune user posts Admin module addon for phpBB. This script allows you to prune posts based on a wide range of criteria.';
$lang['Forums_to_prune'] = 'Forums to Prune';
$lang['Forums_to_prune_explain'] = 'Check the box to prune posts in that forum. You can check multiple forums. (Note for large forums: You should only do a couple of forums at a time if you\'re pruning many posts)';
$lang['Users_to_prune'] = 'Users to Prune';
$lang['Username_explain'] = 'Prune posts made by this specific user';
$lang['All_users_explain'] = 'Prune posts by all users';
$lang['Banned_users'] = 'Banned users';
$lang['Banned_users_explain'] = 'Prune posts made by all users that have been banned (as per the banlist)';
$lang['Group'] = 'Group';
$lang['Group_explain'] = 'Prune posts made by users in this specific group';
$lang['IP_explain'] = 'Prune posts made by a specific ip address (xxx.xxx.xxx.xxx), wildcard (xxx.xxx.xxx.*) or range (xxx.xxx.xxx.xxx-yyy.yyy.yyy.yyy). Note: the last quad .255 is considered the range of all the IPs in that quad. If you enter 10.0.0.255, it is just like entering 10.0.0.* (No IP is assigned .255 for that matter, it is reserved). Where you may encounter this is in ranges, 10.0.0.5-10.0.0.255 is the same as "10.0.0.*" . You should really enter 10.0.0.5-10.0.0.254 .';
$lang['Banned_IPs'] = 'Banned IP Addresses';
$lang['Banned_IPs_explain'] = 'Prune posts made by all IPs in the banned list.';
$lang['Guest_posters'] = 'Guest Posters';
$lang['Guest_posters_explain'] = 'Prune posts made by guest posters only (Users not logged in).';
$lang['Date_criteria'] = 'Date Criteria';
$lang['Before'] = 'Before';
$lang['On'] = 'On';
$lang['After'] = 'After';
$lang['the_last'] = 'the last';
$lang['Seconds'] = 'Seconds';
$lang['Minutes'] = 'Minutes';
$lang['By_time_explain'] = 'Prune posts based on the above time. Please note only whole numbers are accepted, there is no reason to use decimals. (If you need .5 days, input 12 and select hours).';
$lang['ddmmyyyy'] = '(dd/mm/yyyy)';
$lang['Date_explain'] = 'Prune posts on above date criteria. Note dates are limited to roughly 1970 - 2038 (4 Bit unix timestamp limit)';
$lang['to'] = 'to';
$lang['Range_explain'] = 'Prune posts between both dates. Dates are subject to above limits.';
$lang['All_posts_explain'] = 'Prune all posts regardless of time.';
$lang['Pruning_options'] = 'Pruning Options';
$lang['Prune_remove_topics'] = 'Remove Topics by User(s)?';
$lang['Prune_remove_topics_explain'] = 'If the user(s) you selected started the topic and others have replied to the topic, would you like the entire topic removed?';
$lang['Exempt_stickies'] = 'Exempt Stickies?';
$lang['Exempt_stickies_explain'] = 'Do not prune posts in stickied topics.';
$lang['Exempt_announcements'] = 'Exempt Announcements?';
$lang['Exempt_announcements_explain'] = 'Do not prune posts in Announcements.';
$lang['Exempt_open'] = 'Exempt Open Topics?';
$lang['Exempt_open_explain'] = 'Do not prune posts in topics that are still open. (e.g. Select this as yes to prune locked topics only)';
$lang['Exempt_polls'] = 'Exempt Polls?';
$lang['Exempt_polls_explain'] = 'Do not prune posts in topics with Polls.';
$lang['Adjust_post_counts'] = 'Adjust Post Counts?';
$lang['Adjust_post_counts_explain'] = 'Update user\'s post counts to reflect posts that were deleted.';
$lang['Update_search'] = 'Update Search Tables?';
$lang['Update_search_explain'] = 'Whether posts should be removed from the search tables. If you select No, you will need to manually rebuild the search tables. You should only select No if you have a very large board on a very slow server pruning many posts.';

$lang['Prune_invalid_mode'] = 'Unable to Prune - Invalid mode';
$lang['Prune_invalid_IP'] = 'Invalid IP Address entered';
$lang['Prune_invalid_date'] = 'Invalid date entered.';
$lang['Prune_invalid_range'] = 'Invalid IP Range entered';
$lang['No_banned_IPs'] = 'There are no banned IP Addresses';
$lang['No_forums_selected'] = 'Unable to start pruning - No forums were selected';
$lang['Prune_no_posts'] = 'Unable to start pruning - No posts were found to prune';

$lang['Prune_finished'] = 'Pruning successfully completed.<br /><br />Return to the <a href="%s">Prune User Posts</a> page.<br /><br />Return to the <a href="%s">Admin Index</a>.';

//
// Prune Inactive Users by kkroo < pri...@ho... > (Omar Ramadan) http://phpbb-login.sourceforge.net
//
$lang['Click_return_userprune'] = 'Click %sHere%s to return to Prune Inactive Users';
$lang['Prune_users_page_title'] = 'Prune Inactive Users';
$lang['Prune_users_page_explain'] = 'This is a list of users fetched by the query you created. Select the users that you want to prune below and hit submit. If you would would like to notify the user that his account is inactive, click email on the user\'s row.';
$lang['Prune_users_Confirm_message'] = 'Are you sure you want to delete these users?';
$lang['Prune_users_Confirm_last_visit'] = 'Last Visit';
$lang['Prune_users_Confirm_select_all_none'] = 'Select All/None';
$lang['Prune_users_selected'] = 'Selected';
$lang['Never'] = 'Never';
$lang['All_Time'] = 'All Time';
$lang['Seven_days'] = 'Seven days ago';
$lang['Ten_days'] = 'Ten days ago';
$lang['Two_weeks'] = 'Two weeks ago';
$lang['One_month'] = 'One month ago';
$lang['Two_months'] = 'Two months ago';
$lang['Three_months'] = 'Three months ago';

$lang['Notify_user'] = 'Notify';
$lang['user_regdate'] = 'Registered';
$lang['user_active'] = 'Activated';
$lang['user_posts'] = 'Posts';
$lang['Prune_users_sql_explain'] = 'Build your search criteria using the form below.';
$lang['Build_Query'] = 'Build Query';
$lang['Build_Your_Query'] = 'Build your query';
$lang['last_visit_explain'] = 'Scan for users that have not logged in since the selected number of days ago. Use "Never" to find users that have never logged in.';
$lang['user_regdate_explain'] = 'Set a limit for the user registration dates. For example, if you use the "Active" check below, you might want to give users a few days to click their activation email first. The default limit is 7 days, meaning that users are given a 7 day window to complete thier registration before they are removed.';
$lang['user_active_explain'] = 'Use this option to mark users that have not activated their accounts, or that have become inactive for some other reason.';
$lang['user_posts_explain'] = 'Set a criteria for marking users based on post count. The most common setting is for "zero post" users.';
$lang['Your_account_is_inactive'] = 'Your account is inactive.';
?>
--- NEW FILE: index.htm ---
<html>
<head>
<title></title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
</head>

<body bgcolor="#FFFFFF" text="#000000">

</body>
</html>