Re: [MRBS-general] problem in MRBS

[jiten j. <jit...@go...>]

Dear Friends,

I have done user authentication now when I click to room and adding some
entries .

showing :

add entry > Brief Description  >  Full Description:
  (Number of people,
  Internal/External etc.)

Start :

After that it is showing error . "Internal error - resolution is NULL or <=
0"


Even I change resolution .




On Mon, Aug 29, 2011 at 12:53 PM, Campbell Morrison <
cam...@gm...> wrote:

> As it says, the LDAP extension is not installed or enabled in your PHP
> system.   This is not an MRBS problem – you’ll need to re-install or
> reconfigure your PHP system, or else consult your system administrator/web
> hosting company.****
>
> ** **
>
> Campbell****
>
> ** **
>
> ** **
>
> ** **
>
> *From:* jiten jha [mailto:jit...@go...]
> *Sent:* 29 August 2011 07:45
> *To:* ma...@ca...; General purpose list
> (support/developers/users)
> *Subject:* Re: [MRBS-general] problem in MRBS****
>
> ** **
>
> Dear Friends,
>
> I am using MRBS version 1.4.7. I am try to configure LDAP authentication
> option .
>
> When i click to login icon and put user name I10075 and password "123456"
>
> *"ERROR: PHP's 'ldap' extension is not installed/enabled. Please check
> your MRBS and web server configuration."*
>
> Please help me to solve this problem ASAP .
> I really need help . I have read MRBS Authentication Documentation.
> But Not getting good Idea.
>
> config.inc.php file configuration .
>
>
> <?php
>
> // $Id: config.inc.php 1825 2011-05-14 09:37:11Z cimorrison $
>
> /**************************************************************************
>  *   MRBS Configuration File
>  *   Configure this file for your site.
>  *   You shouldn't have to modify anything outside this file
>  *   (except for the lang.* files, eg lang.en for English, if
>  *   you want to change text strings such as "Meeting Room
>  *   Booking System", "room" and "area").
>
>  **************************************************************************/
>
> // The timezone your meeting rooms run in. It is especially important
> // to set this if you're using PHP 5 on Linux. In this configuration
> // if you don't, meetings in a different DST than you are currently
> // in are offset by the DST offset incorrectly.
> //
> // When upgrading an existing installation, this should be set to the
> // timezone the web server runs in.  See the INSTALL document for more
> information.
> //
> // A list of valid timezones can be found at
> http://php.net/manual/timezones.php
> // The following line must be uncommented by removing the '//' at the
> beginning
> $timezone = "Asia/Calcutta";
>
>
> /*******************
>  * Database settings
>  ******************/
> // Which database system: "pgsql"=PostgreSQL, "mysql"=MySQL,
> // "mysqli"=MySQL via the mysqli PHP extension
> $dbsys = "mysql";
> // Hostname of database server. For pgsql, can use "" instead of localhost
> // to use Unix Domain Sockets instead of TCP/IP.
> $db_host = "localhost";
> // Database name:
> $db_database = "mrbs";
> // Database login user name:
> $db_login = "root";
> // Database login password:
> $db_password = 'indore';
> // Prefix for table names.  This will allow multiple installations where
> only
> // one database is available
> $db_tbl_prefix = "mrbs_";
> // Uncomment this to NOT use PHP persistent (pooled) database connections:
> // $db_nopersist = 1;
>
> $mrbs_admin = "Phy Sysad";
> $mrbs_admin_email = "jj...@ph...";
> $mrbs_company = " Department of Physics ";
> $url_base = "http://www.phy.ac.in/mrbs";
>
> /* Add lines from systemdefaults.inc.php and areadefaults.inc.php below
> here
>    to change the default configuration. Do _NOT_ modify
> systemdefaults.inc.php
>    or areadefaults.inc.php.  */
>
>
>
>
>
>
> // This next section must come at the end of the config file - ie after any
> // language and mail settings, as the definitions are used in the included
> file
> //
> // IMPORTANT NOTE: Do NOT put any configuration apart from the "Entry
> Types"
> // below this section
> require_once "language.inc";   // DO NOT DELETE THIS LINE
>
> /*************
>  * Entry Types
>  *************/
>
> // This array maps entry type codes (letters A through J) into
> descriptions.
> //
> // Each type has a color which is defined in the array $color_types in the
> Themes
> // directory - just edit whichever include file corresponds to the theme
> you
> // have chosen in the config settings. (The default is default.inc,
> unsurprisingly!)
> //
> // The value for each type is a short (one word is best) description of the
> // type. The values must be escaped for HTML output ("R&amp;D").
> // Please leave I and E alone for compatibility.
> // If a type's entry is unset or empty, that type is not defined; it will
> not
> // be shown in the day view color-key, and not offered in the type selector
> // for new or edited entries.
>
> // $typel["A"] = "A";
> // $typel["B"] = "B";
> // $typel["C"] = "C";
> // $typel["D"] = "D";
> $typel["E"] = get_vocab("external");
> // $typel["F"] = "F";
> // $typel["G"] = "G";
> // $typel["H"] = "H";
> $typel["I"] = get_vocab("internal");
> // $typel["J"] = "J";
>
>
>
>
>
>
>
> /***********************************************
>  * Authentication settings - read AUTHENTICATION
>  ***********************************************/
>
> $auth["session"] = "php"; // How to get and keep the user ID. One of
>            // "http" "php" "cookie" "ip" "host" "nt" "omni"
>            // "remote_user"
>
> #$auth["type"] = "config"; // How to validate the user/password. One of
> "none"
> $auth["type"] = "ldap"; // How to validate the user/password. One of "none"
>                           // "config" "db" "db_ext" "pop3" "imap" "ldap"
> "nis"
>                           // "nw" "ext".
> // NOTE:  if you are using the "db" authentication scheme, then make sure
> you keep the admin user
> // "administrator" below.    The system initially relies on there being an
> admin called "administrator".
> // Once you have set up the user list and created one or more other admins
> (by adding them both to the
> // user list and the config file), then you can delete or rename the
> "administrator" user.
>
> // Configuration parameters for 'cookie' session scheme
>
> // The encryption secret key for the session tokens. You are strongly
> // advised to change this if you use this session scheme
> $auth["session_cookie"]["secret"] = "This isn't a very good secret!";
> // The expiry time of a session, in seconds
> $auth["session_cookie"]["session_expire_time"] = (60*60*24*30); // 30 days
> // Whether to include the user's IP address in their session cookie.
> // Increases security, but could cause problems with proxies/dynamic IP
> // machines
> $auth["session_cookie"]["include_ip"] = TRUE;
>
>
> // Cookie path override. If this value is set it will be used by the
> // 'php' and 'cookie' session schemes to override the default behaviour
> // of automatically determining the cookie path to use
> $cookie_path_override = '';
>
> // The list of administrators (can modify other peoples settings)
> $auth["admin"][] = "127.0.0.1";   // localhost IP address. Useful with IP
> sessions.
> $auth["admin"][] = "administrator"; // A user name from the user list.
> Useful
>                                     // with most other session schemes.
> //$auth["admin"][] = "10.0.0.1";
> //$auth["admin"][] = "10.0.0.2";
> //$auth["admin"][] = "10.0.0.3";
>
> // 'auth_config' user database
> // Format: $auth["user"]["name"] = "password";
> $auth["user"]["administrator"] = "mrbs";
>
> # Ldap acounts Admin permission
> $auth["admin"][] = "I10075";    # Administrator of hallbook
> $auth["admin"][] = "tomy";    # Seminar Coordinator
> $auth["admin"][] = "jjha";    # Seminar Coordinator
>
> $auth["user"]["I10075"] = "123456";
>
>
> // 'session_http' configuration settings
> $auth["realm"]  = "mrbs";
>
> // 'session_remote_user' configuration settings
> //$auth['remote_user']['logout_link'] = '/logout/link.html';
>
> // 'auth_ext' configuration settings
> $auth["prog"]   = "";
> $auth["params"] = "";
>
> // 'auth_db_ext' configuration settings
> $auth['db_ext']['db_host'] = 'localhost';
> $auth['db_ext']['db_username'] = 'authuser';
> $auth['db_ext']['db_password'] = 'authpass';
> $auth['db_ext']['db_name'] = 'authdb';
> $auth['db_ext']['db_table'] = 'users';
> $auth['db_ext']['column_name_username'] = 'name';
> $auth['db_ext']['column_name_password'] = 'password';
> // Either 'md5', 'sha1', 'crypt' or 'plaintext'
> $auth['db_ext']['password_format'] = 'md5';
>
> // 'auth_ldap' configuration settings
> // Where is the LDAP server
> //$ldap_host = "localhost";
> $ldap_host = "ldap.iitb.ac.in";
> // If you have a non-standard LDAP port, you can define it here
> //$ldap_port = 389;
> // If you do not want to use LDAP v3, change the following to false
> $ldap_v3 = true;
> // If you want to use TLS, change the following to true
> $ldap_tls = false;
> // LDAP base distinguish name
> // See AUTHENTICATION for details of how check against multiple base dn's
> //$ldap_base_dn = "ou=organizationalunit,dc=my-domain,dc=com";
> #$ldap_base_dn =
> "ou=fac,ou=che,ou=people,dc=iitb,dc=ac,dc=in;ou=prjstf,ou=che,ou=people,dc=iitb,dc=ac,dc=in";
> #$ldap_base_dn = "ou=prjstf,ou=che,ou=people,dc=iitb,dc=ac,dc=in";
> $ldap_base_dn[] = "ou=fac,ou=che,ou=people,dc=iitb,dc=ac,dc=in";
> $ldap_base_dn[] = "ou=stf,ou=che,ou=people,dc=iitb,dc=ac,dc=in";
>
> // Attribute within the base dn that contains the username
> $ldap_user_attrib = "uid";
> #$ldap_user_attrib = "cn";
>
> // If you need to search the directory to find the user's DN to bind
> // with, set the following to the attribute that holds the user's
> // "username". In Microsoft AD directories this is "sAMAccountName"
> //$ldap_dn_search_attrib = "sAMAccountName";
> // If you need to bind as a particular user to do the search described
> // above, specify the DN and password in the variables below
> // $ldap_dn_search_dn = "cn=Search User,ou=Users,dc=some,dc=company";
> // $ldap_dn_search_password = "some-password";
>
> // 'auth_ldap' extra configuration for ldap configuration of who can use
> // the system
> // If it's set, the $ldap_filter will be combined with the value of
> // $ldap_user_attrib like this:
> //   (&($ldap_user_attrib=username)($ldap_filter))
> // After binding to check the password, this check is used to see that
> // they are a valid user of mrbs.
> //$ldap_filter = "mrbsuser=y";
>
> // 'auth_imap' configuration settings
> // See AUTHENTICATION for details of how check against multiple servers
> // Where is the IMAP server
> $imap_host = "imap-server-name";
> // The IMAP server port
> $imap_port = "143";
>
> // 'auth_imap_php' configuration settings
> $auth["imap_php"]["hostname"] = "localhost";
> // You can also specify any of the following options:
> // Specifies the port number to connect to
> //$auth["imap_php"]["port"] = 993;
> // Use SSL
> //$auth["imap_php"]["ssl"] = TRUE;
> // Use TLS
> //$auth["imap_php"]["tls"] = TRUE;
> // Turn off SSL/TLS certificate validation
> //$auth["imap_php"]["novalidate-cert"] = TRUE;
>
> // 'auth_pop3' configuration settings
> // See AUTHENTICATION for details of how check against multiple servers
> // Where is the POP3 server
> $pop3_host = "pop3-server-name";
> // The POP3 server port
> $pop3_port = "110";
>
> /**********************************************
>  * Email settings
>  **********************************************/
>
> // You can override the charset used in emails if $unicode_encoding is 1
> // (utf-8) if you like, but be sure the charset you choose can handle all
> // the characters in the translation and that anyone may use in a
> // booking description
> //$mail_charset = "iso-8859-1";
>
> // Set to TRUE if you want to be notified when entries are booked. Default
> is
> // FALSE
> define ("MAIL_ADMIN_ON_BOOKINGS", FALSE);
>
> // Set to TRUE if you want AREA ADMIN to be notified when entries are
> booked.
> // Default is FALSE. Area admin emails are set in room_area admin page.
> define ("MAIL_AREA_ADMIN_ON_BOOKINGS", TRUE);
>
> // Set to TRUE if you want ROOM ADMIN to be notified when entries are
> booked.
> // Default is FALSE. Room admin emails are set in room_area admin page.
> define ("MAIL_ROOM_ADMIN_ON_BOOKINGS", FALSE);
>
> // Set to TRUE if you want ADMIN to be notified when entries are deleted.
> Email
> // will be sent to mrbs admin, area admin and room admin as per above
> settings,
> // as well as to booker if MAIL_BOOKER is TRUE (see below).
> define ("MAIL_ADMIN_ON_DELETE", TRUE);
>
> // Set to TRUE if you want to be notified on every change (i.e, on new
> entries)
> // but also each time they are edited. Default is FALSE (only new entries)
> define ("MAIL_ADMIN_ALL", FALSE);
>
> // Set to TRUE is you want to show entry details in email, otherwise only a
> // link to view_entry is provided. Irrelevant for deleted entries. Default
> is
> // FALSE.
> define ("MAIL_DETAILS", TRUE);
>
> // Set to TRUE if you want BOOKER to receive a copy of his entries as well
> any
> // changes (depends of MAIL_ADMIN_ALL, see below). Default is FALSE. To
> know
> // how to set mrbs to send emails to users/bookers, see INSTALL.
> define ("MAIL_BOOKER", FALSE);
>
> // If MAIL_BOOKER is set to TRUE (see above) and you use an authentication
> // scheme other than 'auth_db', you need to provide the mail domain that
> will
> // be appended to the username to produce a valid email address (ie.
> // "@domain.com").
> define ("MAIL_DOMAIN", '');
>
> // If you use MAIL_DOMAIN above and username returned by mrbs contains
> extra
> // strings appended like domain name ('username.domain'), you need to
> provide
> // this extra string here so that it will be removed from the username.
> define ("MAIL_USERNAME_SUFFIX", '');
>
> // Set the name of the Backend used to transport your mails. Either "mail",
> // "smtp" or "sendmail". Default is 'mail'. See INSTALL for more details.
> define ("MAIL_ADMIN_BACKEND", "mail");
>
> /*******************
>  * Sendmail settings
>  */
>
> // Set the path of the Sendmail program (only used with "sendmail"
> backend).
> // Default is "/usr/bin/sendmail"
> define ("SENDMAIL_PATH", "/usr/bin/sendmail");
>
> // Set additional Sendmail parameters (only used with "sendmail" backend).
> // (example "-t -i"). Default is ""
> define ("SENDMAIL_ARGS", '');
>
> /*******************
>  * SMTP settings
>  */
>
> // Set smtp server to connect. Default is 'localhost' (only used with
> "smtp"
> // backend).
> define ("SMTP_HOST", "localhost");
>
> // Set smtp port to connect. Default is '25' (only used with "smtp"
> backend).
> define ("SMTP_PORT", 25);
>
> // Set whether or not to use SMTP authentication. Default is 'FALSE'
> define ("SMTP_AUTH", FALSE);
>
> // Set the username to use for SMTP authentication. Default is ""
> define ("SMTP_USERNAME", '');
>
> // Set the password to use for SMTP authentication. Default is ""
> define ("SMTP_PASSWORD", '');
>
> /**********************
>  * Miscellaneous settings
>  */
>
> // Set the language used for emails (choose an available lang.* file).
> // Default is 'en'.
> define ("MAIL_ADMIN_LANG", 'en');
>
> // Set the email address of the From field. Default is $mrbs_admin_email
> define ("MAIL_FROM", $mrbs_admin_email);
>
> // Set the recipient email. Default is $mrbs_admin_email. You can define
> // more than one recipient like this "jo...@do...,sc...@ti..."
> define ("MAIL_RECIPIENTS", $mrbs_admin_email);
>
> // Set email address of the Carbon Copy field. Default is ''. You can
> define
> // more than one recipient (see MAIL_RECIPIENTS)
> define ("MAIL_CC", '');
>
> /**********
>  * Language
>  *&********/
>
> // Set this to 1 to use UTF-8 in all pages and in the database, otherwise
> // text gets entered in the database in different encodings, dependent
> // on the users' language
> $unicode_encoding = 1;
>
> // Set this to a different language specifier to default to different
> // language tokens. This must equate to a lang.* file in MRBS.
> // e.g. use "fr" to use the translations in "lang.fr" as the default
> // translations
> $default_language_tokens = "en";
>
> // Set this to 1 to disable the automatic language changing MRBS performs
> // based on the user's browser language settings. It will ensure that
> // the language displayed is always the value of $default_language_tokens,
> // as specified above
> $disable_automatic_language_changing = 0;
>
> // Set this to a valid locale (for the OS you run the MRBS server on)
> // if you want to override the automatic locale determination MRBS
> // performs
> $override_locale = "";
>
> // faq file language selection. IF not set, use the default english file.
> // IF your language faq file is available, set $faqfilelang to match the
> // end of the file name, including the underscore (ie. for site_faq_fr.html
> // use "_fr"
> $faqfilelang = "";
>
> // This next require must be done after the definitions above, as the
> definitions
> // are used in the included file
> require_once "language.inc";
>
>
> ?>
>
>
>
> ****
>
> On Thu, Aug 25, 2011 at 5:32 PM, Campbell Morrison <
> cam...@gm...> wrote:****
>
> Your default username and password depends on what you set the
> authentication type to in the config file.   Eventually you will want to set
> it to ‘ldap’, but you can get going by setting it to ‘config’ or ‘db’.    If
> you set it to ‘config’ the username and password is administrator/secret.
> If you set it to ‘db’ then click on the “User list” link to set up users.*
> ***
>
>  ****
>
> Once you’ve logged in as an admin, go to the “Rooms” page to create an area
> and room.****
>
>  ****
>
> More information in AUTHENTICATION.****
>
>  ****
>
> Campbell****
>
>  ****
>
>  ****
>
> *From:* jiten jha [mailto:jit...@go...]
> *Sent:* 25 August 2011 12:50
> *To:* mrb...@li...
> *Subject:* [MRBS-general] problem in MRBS****
>
>  ****
>
> Dear Team,
>
> I checked your web site and read installation process and installed mysql ,
> php, apache .
> Download mrbs tar file and untar it in a /var/www/ .
> In a tar file there 2 or 3 .sql files . So i login in a mysql and run
> "source /var/www/mrbs/tables.my.sql" file.
>
> Now my problem is .
> 1> It is showing " no rooms defined for this area " .
> 2> When i click to login user name so what is the default username and
> password.
> 3> If there is no default username and password so how can i create user
> name and password .
> 4> Which file I have to modify for username and password for normal login.
> 5> I want to create ldap user name and password authentication .
>
> So please help me to solve the problem  ASAP.
> I really want your help .
>  Please find the attachment file also.
>
> --
> Regards
> Jitendra Jha****
>
>
>
> ------------------------------------------------------------------------------
> EMC VNX: the world's simplest storage, starting under $10K
> The only unified storage solution that offers unified management
> Up to 160% more powerful than alternatives and 25% more efficient.
> Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
> _______________________________________________
> mrbs-general mailing list
> mrb...@li...
> https://lists.sourceforge.net/lists/listinfo/mrbs-general
> Want to unsubscribe: mailto:mrb...@li...
> ?subject=unsubscribe****
>
>
>
>
> --
> Regards
> Jitendra Jha
> Linux System Administrator
> IIT Bombay
> +91-9893325765, 07498370550
> http://www.iitb.ac.in
> jj...@ph...
> I1...@ii...****
>
>
> ------------------------------------------------------------------------------
> EMC VNX: the world's simplest storage, starting under $10K
> The only unified storage solution that offers unified management
> Up to 160% more powerful than alternatives and 25% more efficient.
> Guaranteed. http://p.sf.net/sfu/emc-vnx-dev2dev
> _______________________________________________
> mrbs-general mailing list
> mrb...@li...
> https://lists.sourceforge.net/lists/listinfo/mrbs-general
> Want to unsubscribe: mailto:mrb...@li...
> ?subject=unsubscribe
>
>


-- 
Regards
Jitendra Jha
Linux System Administrator