Re: [Mjpeg-users] iomega buz card on FC6

[Anne W. <can...@go...>]

On Tuesday 31 Jul 2007, Lance F. Squire wrote:
> Bernhard Praschinger wrote:
> > Hallo
> > The driver for the zoran board is in the kenel now. you might just need
> > to load the modules by hand.
> >
> > If the card if found by lspci.
>
> ???
> lspci does list the Zoran chip...
>
That's a start :-)

> > Try lsmod to find out if some zoran modules are alreaddy loaded. If you
> > have some saa* and zr* drivers loaded it should work.
>
> None listed.
>
I don't have the Buz card, but my DC10+ needs zr36067, zr36060, adv7175,=20
saa7110., compat_ioctl32, i2c_algo_bit, i2c_core, videocodec and videodev. =
=20
This is a new install and I haven't checked out mjpegtools yet, but the lis=
t=20
looks OK.  I didn't have to modprobe these, but you may have to on your=20
install.  Try googling for 'Buz modprobe' and see if that finds someone=20
listing the modules that you need, in case they are different from mine.

> > What is the output of xawtv, and what options did you use for starting
> > xawtv ?
>
> [lance@PS2-80 ~]$ xawtv
> This is xawtv-3.95, running on Linux/x86_64 (2.6.20-1.2962.fc6)
> can't open /dev/video0: No such file or directory
> v4l2: open /dev/video0: No such file or directory
> v4l2: open /dev/video0: No such file or directory
> v4l: open /dev/video0: No such file or directory
> no video grabber device available
>
That suggests that you don't have video4lan installed.  You need v4l and v4=
l2.

> > If that produces no real usefull help please unload all zoran modules.
> > and try loding the zoran driver manually:
> > modprobe zr36067 low_bitrate=3D1
>
> zr36067: Unknown parameter 'low_bitrate'
>
> > The important thing is the low_bitrate option, you need it for the buz.
>
> Just to be through, I tried just modprobe zr36067.
>
> MJPEG[0]: find_zr36057() - no card specified, please use card=3Dx insmod
> option
>
> So I tried modprobe zr36067 card=3D7
>
> **WARNING** I2C adapter driver [Buz[0]] forgot to specify physical
> device; fix it!
>
> Hope this info helps...
>
=46or this part you need a Buz card user to help, but fixing the other bits=
=20
meanwhile should help. =20

Anne