Re: [micro-manager-general] Question about Retiga 6000 and Retiga 6

[Cammer, M. <Mic...@ny...>]

Thank you.


Teledyne/Qimaging was very helpful with setting up the Retiga 6000 with a version of pvcam specifically for Win10.  Except for this speed issue.


I reached out to you to see if there was any MM issues specifically.  Teledyne/Qimaging gave me some avenues to investigate to troubleshoot.  And I contacted the IT people to see if they installed anything that may be causing a bottleneck, like anti-virus.


What I was thinking for ROI was a preset so that we don;t have to take a snapshot and then draw a ROI.  Like a preset 1200 X 1200 at the center when starting up a configuration.


Thank you again and best regards-


Michael Cammer, Sr Research Scientist, DART Microscopy Laboratory

NYU Langone Health, 540 First Avenue, SK2 Microscopy Suite, New York, NY  10016

Mic...@me...<mailto:Mic...@me...>  http://nyulmc.org/micros  http://microscopynotes.com/

Voice direct only, no text or messages:  1-914-309-3270 and 1-646-501-0567



________________________________
From: Nico Stuurman <nic...@uc...>
Sent: Thursday, March 12, 2020 6:33:08 PM
To: Micro-Manager General
Subject: Re: [micro-manager-general] Question about Retiga 6000 and Retiga 6

[EXTERNAL]

Hi Michael,

> I have set up two different MicroManager installations for people with
> a Retiga 6 on one and a Retiga 6000 on another on Windows 10 computers.
>

Those are Teledyne/Qimaging cameras working through PVCAM?
>
>
> On both systems, 1 x 1 binning of full field does not work. I am
> guessing that this is due to the large number of pixels and
> limitations of the USB bus speed.  I was wondering whether there is a
> way to set MM to delay between each frame in live mode to allow for
> full frame 1 x 1 imaging or if there is another way to make this work.
>

It may be useful to ask Teledyne for support.  They have been very
supportive of Micro-Manager and may be able to give good advice and/or
fix problems when asked.

> If not, help would be appreciated with presetting a ROI for imaging field.
>

I am not sure what you have in mind.  What do you need beyond the usual
graphical tools to set an ROI?


Best,


Nico





_______________________________________________
micro-manager-general mailing list
mic...@li...
https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.sourceforge.net_lists_listinfo_micro-2Dmanager-2Dgeneral&d=DwIF-g&c=j5oPpO0eBH1iio48DtsedeElZfc04rx3ExJHeIIZuCs&r=hUBj2D5n6oKThx2L01qn8IORZb5f-ruLVXPmQ1zQNnM&m=BYEri-zPot5_PSb2d-7xstmP4A6SC079veCxcP9JNxc&s=KWwwkQVl9mBObQGtxHG74PHhSKN6fYA1obZ2SlU2i2U&e=