Re: [micro-manager-general] Slow start to large MDAs

[Stuurman, N. <Nic...@uc...>]

Hi Dan,

On 2/21/2020 1:02 PM, Daniel Dickinson wrote:
Using MicroManager 2.0g, we've noticed that a large time series (7,000 frames) takes a very long time to start acquiring when run from the MDA window.  When we click Acquire, the image window appears but the illumination shutter does not open.  After >1 minute, the shutter opens and the image sequence is acquired normally.  A single snap is essentially instantaneous, and stacks of 70 or 700 frames start without a noticeable delay.  Based on this, my hunch is that MM is struggling to pre-allocate memory for the large stack, but I don't know enough of the details of how the MDA code works to try to troubleshoot. This behavior was first observed with a Nov. 2019 build but we upgraded to the Feb. 20 nightly build and it didn't change anything.  Thanks for any suggestions.

Just tried to reproduce this using the Demo equipment, but did not get a delay as you describe.  There is a delay when using a circular buffer with a large size for the first time.  For instance, after setting a very large circular buffer (Tools > Options), the first time you run live mode (or start an MDA), you will notice a delay (apparently caused by allocating memory).  The second time you run live, there is no delay (as the buffer is re-used).  Your case seems different.  It could help to have a look at the Trouble Report (would be great if you can send one).  Also, if this behavior was not there in builds earlier than Nov. 2019, it would be great if you could pinpoint when the behavior started.

Best,


Nico