Re: [micro-manager-general] Hamamatsu Camera Configuration Error

[Pedro A. <pa...@gm...>]

Hi Shawn,

Not sure this is very helpful but I've occasionally found DCAM to be
unstable on reboot. Do you have the latest DCAM? Rebooting the computer
might help DCAM re-detect the camera. You probably know this but removing
the camera from the configuration won't help, by the way, it's just an
option to let you connect to the rest of the hardware, sans camera.

One useful tool in DCAM is the ExCap software. It's Hamamatsu's own capture
tool and if that doesn't work, you'll know it's a DCAM issue and not a
micro-manager issue.

Good luck,
Pedro

On Mon, 17 Feb 2020 at 15:49, Shaw A.N. <A....@so...> wrote:

> Dear all,
>
> I am using micromanager to control an Axiovert 200M with a Hamamatsu ORCA
> ER camera, both of which have the correct adapters in the Micromanager
> hardware configuration wizard. However, every time I turn off the
> microscope, micromanager and camera controller, then turn them back on
> again, I get the error: "initialization error: Error in device
> "HamamatsuHam_CDCAM": Native module failed to load (6). Remove device
> HamamatsuHam_DCAM from list?". After removing from the list, I am then
> unable to add it again (error in device "HamamatsuHam_DCAM": Native module
> failed to load (6). This then leaves me limited options. Sometimes in the
> process of trying to add the module, it comes up with a Java error saying
> it isn't working, followed by the whole program crashing. Other times it
> lets me add the module after restarting the software. I am unsure as to why
> this is happening, but it isn't really very feasible for me to have to go
> through this every time I need to use this setup. Is this something anyone
> has experienced before, and if so, do you know how to fix the issue?
> Thanks,
>
> Alex
> _______________________________________________
> micro-manager-general mailing list
> mic...@li...
> https://lists.sourceforge.net/lists/listinfo/micro-manager-general
>