Re: [micro-manager-general] Coherent Sapphire CDRH Driver unit

[Nico S. <nic...@uc...>]

Thanks Kyle!

I added your notes to the Sapphire page on the Micro-Manager website: 
https://micro-manager.org/wiki/Sapphire


On 5/14/18 8:25 AM, Kyle Douglass wrote:
> - Be sure that the Local/Remote switch on the back of the CDRH control 
> box is *set to Local*. /Remote/ in this case refers to analog control, 
> whereby an external voltage signal can set the power and state of the 
> laser. Setting it to /Local/ allows us to control the laser through a 
> serial interface.
> - The Micro-Manager device adapter for this laser is called *Sapphire 
> Laser*.
> - The baud rate for the laser's serial communications *must be set to 
> 19200 bps*. Anything else and you will not be able to communicate with 
> it. The terminating characters are /CR LF./


Best,

Nico