Re: [micro-manager-general] About GigE camera with micro-manager
Status: Beta
Brought to you by:
nicost
Menu
▾
▴
Re: [micro-manager-general] About GigE camera with micro-manager
|
From: Yu L. <yul...@gm...> - 2015-03-05 00:42:41
|
Arnold,
In order for the micromanager to work with a camera, it needs a dll
file that is called "adapter" by micromanager. It is kind of like the
connection between micromanager and the actual proprietary driver provided
by JAI. The cfg file is for the user to instruct micromanager which camera
to open and how. I am not a developer, so this is just my imperfect
understanding. I looked at my old correspondence with the author of the
driver, and also looked at the source code of the current release. The
problem I had is already fixed in the current release. I will forward my
correspondence to you in a separate email.
Still I am not sure if that is the same problem as you are
experiencing. Just in case, I am attaching my cfg file and the dll file I
am using. Both should be placed under the installation directory of
micromanager.
Sorry for not being able to find the root cause. Hopefully other forum
members could offer some advice. By the way, it would help the developers
to troubleshoot the problem if you attach the log file after turning on
debug mode.
Best,
Liu Yu
On Mar 3, 2015 11:54 PM, "mugger [via Micro-Manager]" <
ml-...@n2...> wrote:
> Hi Yu,
>
> Thank you for your prompt reply. Forgive me if my question sounds stupid.
> I was actually quite confused. Shouldn’t the adapter file be in *.cfg
> format? I installed the JAI software and Micro-manager separately. When
> installation finished, I clicked the exe files to open both of them. I
> don’t know where to find the dll files that you talked about. The JAI
> software is working fine with the camera. But I never successfully opened
> it in Micro-manager.
>
> Best,
> Arnold
>
> On 4 Mar 2015, at 6:12 pm, Yu Liu [via Micro-Manager] <[hidden email]
> <http:///user/SendEmail.jtp?type=node&node=7584878&i=0>> wrote:
>
> Hello,
> It's been quite a while since I worked on the adapter and I don't
> even remember what problem I had with the JAI driver. In fact, I already
> removed the Microsoft Studio which was used to compile the adapter for the
> camera. What I do know is that I can use micromanager to acquire image or
> video using this particular camera model. I vaguely remembered that I
> changed the source code of the adapter a little bit to make it work. Still
> exposure time is not configurable. You may also need to try different
> acquisition mode of the camera. In a word, I have a working dll file (the
> adapter for the camera), and it worked with at least one of the acquisition
> mode of the camera. If you want to try the dll file with your camera, I
> will be happy to send it to you. I still wish I had wrote down what I did
> to make it work. I must have put some comments in the source code, but the
> source code is missing as well... I know this is bad bad practice...
>
>
> Best,
>
> Liu Yu
> On Mar 3, 2015 7:15 PM, "mugger [via Micro-Manager]" <<a
> href="x-msg://150/user/SendEmail.jtp?type=node&node=7584877&i=0"
> target="_top" rel="nofollow" link="external" class="">[hidden email]> wrote:
>
>> Yu Liu wrote
>> Hello,
>> I am using a JAI RM 4200 GE camera with GigE connection. It works with
>> JAI control tool correctly and can be detected using the sample
>> configuration files provided by the developer of the adapter. The image
>> from the camera can be seen through the "live" window.
>> One thing I am trying to figure out is how to set the exposure time. It
>> looks like I cannot change the exposure time; the exposure time setting
>> always goes back to 0 after changing it. As a result, all the images
>> acquired are just black pixels. I tried toggling Auto Shutter on and off
>> and it doesn't seem to make a difference.
>> I also noticed that if I tried to modify this configuration file
>> through the wizard, I couldn't do anything meaningful. In another word, all
>> the lists remain empty through all the steps, and I have nothing to do
>> other than clicking Next. I am not sure if this is normal.
>> Thank you very much and any suggestions will be appreciated
>>
>> Best,
>> Liu Yu
>>
>> I found your thread is probably the most helpful, but I was still
>> hopeless at this point. I got even worse that. I used the GigE config file
>> provided:
>> # Generated by Configurator on Thu Feb 03 15:24:17 EST 2011
>>
>> # Reset
>> Property,Core,Initialize,0
>> ....
>>
>> But I did not get anything at all except for this error message. see the
>> attached snapshot!
>> Error: Failed to load hardware configuration...
>>
>>
>> ------------------------------
>> If you reply to this email, your message will be added to the
>> discussion below:
>>
>> http://micro-manager.3463995.n2.nabble.com/About-GigE-camera-with-micro-manager-tp7361976p7584874.html
>> To unsubscribe from About GigE camera with micro-manager, click here.
>> NAML
>> <http://micro-manager.3463995.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>>
>
>
> ------------------------------
> If you reply to this email, your message will be added to the discussion
> below:
>
> http://micro-manager.3463995.n2.nabble.com/About-GigE-camera-with-micro-manager-tp7361976p7584877.html
> To unsubscribe from About GigE camera with micro-manager, click here.
> NAML
> <http://micro-manager.3463995.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>
>
>
>
> ------------------------------
> If you reply to this email, your message will be added to the discussion
> below:
>
> http://micro-manager.3463995.n2.nabble.com/About-GigE-camera-with-micro-manager-tp7361976p7584878.html
> To unsubscribe from About GigE camera with micro-manager, click here
> <http://micro-manager.3463995.n2.nabble.com/template/NamlServlet.jtp?macro=unsubscribe_by_code&node=7361976&code=eXVsLmxpdXl1QGdtYWlsLmNvbXw3MzYxOTc2fC0xNjc1ODQ0ODQz>
> .
> NAML
> <http://micro-manager.3463995.n2.nabble.com/template/NamlServlet.jtp?macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml&base=nabble.naml.namespaces.BasicNamespace-nabble.view.web.template.NabbleNamespace-nabble.view.web.template.NodeNamespace&breadcrumbs=notify_subscribers%21nabble%3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_instant_email%21nabble%3Aemail.naml>
>
GigE-test-config.cfg (738 bytes) <http://micro-manager.3463995.n2.nabble.com/attachment/7584908/0/GigE-test-config.cfg>
mmgr_dal_GigECamera.dll (574K) <http://micro-manager.3463995.n2.nabble.com/attachment/7584908/1/mmgr_dal_GigECamera.dll>
--
View this message in context: http://micro-manager.3463995.n2.nabble.com/About-GigE-camera-with-micro-manager-tp7361976p7584908.html
Sent from the Micro-Manager mailing list archive at Nabble.com. |
