Re: [micro-manager-general] Please help! MM continues to crash after loading hardware configuration (Baumer Optronic/Leica DFC 295)

[Peter H. <pet...@we...>]

Hello Max,

make sure that no other (old) Micro-Manager folder exists on your PC.
In case you have moved your Micro-Manager folder to a different location 
check the path settings in Image.cfg in the Micro-Manager folder.

Use the <Clear log file> button in Tools/Options ... in the MM menu.

Use the demo configuration and modify it in the following steps:
1) Start MM and select the demo configuration. (Make sure that the cfg 
file located in your current MM folder is used!).
2) Delete the Camera Group by selecting the Camera group (Configuration 
Settings area in the upper right corner of the MM dialog) and pressing 
the <-> button.
3) Use the <Save> button in the upper right corner of the MM dialog and 
save the configuartion under a new name. (Make sure that the file is 
stored in your current MM folder.)
3) Start the Hardware Configuration Wizard
4) Use the 'Modify or explore existing configuration option'
5) In Step 2 of the wizard delete the Demo camera from the list of 
installed devices. (If you want to be sure 100% proceed all steps until 
the end without changes and save the configuration in this state. 
Restart the configuration wizard if you have done so.)
6) In Step 2 of the wizard add your camera to the configuration
7) Proceed all steps of the wizard until the end without changes and 
save the configuration.

What messages do you get now?

Regards
Peter

On 28.10.2013 17:37, Max-Joseph Kraus wrote:
> Hello Peter,
> thank you for your answer.
>
> I don't get these messages in the Demo Mode (CoreLog attached).
> I have no other version of MM installed, but I had installed other versions
> previously.
>
> Best regards
> Max
>
>
>
>
> 2013/10/28 Peter Haub <pet...@we...>
>
>>   Hi Max,
>>
>> do you also get this messages
>> "....  Error: Unable to load xxxxxx library: ...."
>> in the CoreLog if you start Micro-Manager with the demo configuration?
>>
>> Can you run your configuration in demo mode?
>>
>> Do you have another installation of Micro-Manager on your system?
>>
>> Peter
>>
>> On 27.10.2013 01:08, Max-Joseph Kraus wrote:
>>
>> Dear list members,
>> please help me!
>> I want to run a Leica DFC 295 (firewire) from Micromanager.
>> System Win XP, Sp3, I just updated Java, loaded first the stable, than the
>> nightly version of MM, I installed the newest drivers for Leica DFC 295
>> including the firewire drivers from the leica homepage and the Baumer SDK
>> v1.7.
>>
>> I can access the DFC 295 via the Twain-interface, the Leica Aplication
>> Suite (LAS) and also via the Baumer Viewer.
>>
>> I configured a freshly installed MM with camera Baumer Optronic as the only
>> hardware component. MM says "Ok" in the hardware configuration wizard.
>>
>> When I finish the hardware configuration wizard, MM disappears without an
>> error message.  The configuration file is saved (dfc.cfg). When I reload MM
>> and select the dfc.cfg i can snap a picture, but the live view does not
>> work ( a frame rate of 0,4 fps is displayed but no image). When i reload mm
>> with dfc.cfg selected and then start the hardware configuration wizard, the
>> MM disappears without an error message.
>>
>> I found and attached two files, that could probably contain more
>> information about the reason of the problem, but I can not understand
>> them: hs_err_pid556.txt and CoreLog20131026.txt
>>
>> Can anybody help me with some advice?
>>
>> Thank you very much in advance.
>>
>> Best regards
>>
>> Max Kraus (Munich)
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> October Webinars: Code for Performance
>> Free Intel webinars can help you accelerate application performance.
>> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
>> the latest Intel processors and coprocessors. See abstracts and register >http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
>>
>>
>>
>> _______________________________________________
>> micro-manager-general mailing lis...@li...://lists.sourceforge.net/lists/listinfo/micro-manager-general
>>
>>
>>
>>
>> ------------------------------------------------------------------------------
>> October Webinars: Code for Performance
>> Free Intel webinars can help you accelerate application performance.
>> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
>> from
>> the latest Intel processors and coprocessors. See abstracts and register >
>> http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
>> _______________________________________________
>> micro-manager-general mailing list
>> mic...@li...
>> https://lists.sourceforge.net/lists/listinfo/micro-manager-general
>>
>>
>
>
>
> ------------------------------------------------------------------------------
> October Webinars: Code for Performance
> Free Intel webinars can help you accelerate application performance.
> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
> the latest Intel processors and coprocessors. See abstracts and register >
> http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
>
>
> _______________________________________________
> micro-manager-general mailing list
> mic...@li...
> https://lists.sourceforge.net/lists/listinfo/micro-manager-general