Re: [Matplotlib-users] twinx cla problem

[Duke, C. <DU...@Gr...>]

Yes, I did. Same result as with cla().
Thanks,
Charlie

-----Original Message-----
From: Sterling Smith [mailto:sm...@fu...] 
Sent: Friday, October 10, 2014 11:30 AM
To: Duke, Charles
Cc: mat...@li...
Subject: Re: [Matplotlib-users] twinx cla problem

This is not tested, but did you try ax2.clear() instead?

-Sterling

On Oct 10, 2014, at 7:45AM, Duke, Charles wrote:

> With matplotlib 1.4.0 the cla() method for the twinx axes also clears the primary axes.  With matplotlib 1.3.1 the method only clears the twinx axes as expected.  I have a much longer program where the twinx axes must be cleared while retaining the primary axis plot.  I would prefer not to replot the entire graph each time the twinx axes change.  You can see this by adding the cla method to the matplotlib web site example, two_scales.py, shown below.
>  
> I have matplotlib installed via the anaconda package. Matplotlib 1.4.0 is from anaconda 2.1.0.  Matplotlib 1.3.1 is from 1.9 versions of the anaconda package.
>  
> Linux version:
> Linux gamow 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 
> GNU/Linux Same cla() result on osX 10.9.4.
>  
> Same result for backends Qt4Agg and TkAgg;  the cla() method cleared both axes.
> I also tried various other options such as setting ax2.hold(False) prior to replotting  ax2.  However, once again ax1 was cleared.  The ax2 clear commands seem to apply to the ax1 axis as well???  These options worked as expected  for the earlier matplotlib version, clearing only the ax2 axis.
>  
> Here's the code:  if you execute the code, you should see a blank figure with the cla() included and the usual two graphs without the cla() method.
>  
> --------------------------------------------------------------------
> import numpy as np
> import matplotlib.pyplot as plt
>  
> fig, ax1 = plt.subplots()
> t = np.arange(0.01, 10.0, 0.01)
> s1 = np.exp(t)
> ax1.plot(t, s1, 'b-')
> ax1.set_xlabel('time (s)')
> # Make the y-axis label and tick labels match the line color.
> ax1.set_ylabel('exp', color='b')
> for tl in ax1.get_yticklabels():
>     tl.set_color('b')
>  
> ax2 = ax1.twinx()
> s2 = np.sin(2*np.pi*t)
> ax2.plot(t, s2, 'r.')
> ax2.set_ylabel('sin', color='r')
> for tl in ax2.get_yticklabels():
>     tl.set_color('r')
>  
> # single line addition to the two_scales.py example # clears both ax2 
> and ax1 under matplotlib 1.4.0, clears only ax2 under matplotlib 1.3.1 
> # obviously, same result with ax2.clear() method
> ax2.cla()
>  
> plt.show()
>  
>  
> I would appreciate any help;  this looks like a bug in the latest version of matplotlib.
> I could not find any reference to this problem in earlier posts.
>  
> Thanks,
> Charlie
>  
> ----------------------------------------------------------------------
> -------- Meet PCI DSS 3.0 Compliance Requirements with EventLog 
> Analyzer Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI 
> DSS Reports Are you Audit-Ready for PCI DSS 3.0 Compliance? Download 
> White paper Comply to PCI DSS 3.0 Requirement 10 and 11.5 with 
> EventLog Analyzer 
> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.
> clktrk_______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users