Re: [Matplotlib-users] matplotlib multiple windows comparison

[Phil E. <pel...@gm...>]

I hadn't spotted you were using the WxAgg backend too - this looks like the
same bug that Brendan reported yesterday.

The *easiest* solution would be to use another back-end until this is
fixed. Do you have 'TkAgg' available? I currently do not have a wx
installation to hand to try out any workarounds at the moment.

Regards,


On 12 March 2013 14:00, Sudheer Joseph <sud...@ya...> wrote:

> Thank you Phil,
>                             But I had tried it earlier after seeing a
> another mail thread. I get command prompt but no figure pops up.
>
> In [3]: import matplotlib.pyplot as plt
>
> In [4]: plt.ion()
>
> In [5]: plt.plot(range(10))
> Out[5]: [<matplotlib.lines.Line2D at 0x410f250>]
>
> In [6]:
>
>  Any way out??
> with best regards,
> Sudheer
> ***************************************************************
> Sudheer Joseph
> Indian National Centre for Ocean Information Services
> Ministry of Earth Sciences, Govt. of India
> POST BOX NO: 21, IDA Jeedeemetla P.O.
> Via Pragathi Nagar,Kukatpally, Hyderabad; Pin:5000 55
> Tel:+91-40-23886047(O),Fax:+91-40-23895011(O),
> Tel:+91-40-23044600(R),Tel:+91-40-9440832534(Mobile)
> E-mail:sjo...@gm...;sud...@ya...
> Web- http://oppamthadathil.tripod.com
> ***************************************************************
>   ------------------------------
> *From:* Phil Elson <pel...@gm...>
> *To:* Sudheer Joseph <sud...@ya...>
> *Cc:* "mat...@li..." <
> mat...@li...>
> *Sent:* Tuesday, 12 March 2013 3:08 PM
> *Subject:* Re: [Matplotlib-users] matplotlib multiple windows comparison
>
> Hi Sudheer,
>
> Try the interactive mode (
> http://matplotlib.org/api/pyplot_api.html#matplotlib.pyplot.ion):
>
>
> >>> import matplotlib.pyplot as plt
> >>> plt.ion()
> >>> plt.plot(range(10))
> [<matplotlib.lines.Line2D object at 0x1c565d0>]
>
> **a figure pops up here and hands you back the python command line**
>
> >>>
>
> Regards,
>
>
>
>
> On 12 March 2013 00:04, Sudheer Joseph <sud...@ya...> wrote:
>
> Dear experts,
> Is there a way to get back to the prompt after a plot is made and
> displayed with out closing the plot?
> The objective is to compare to plots or check some aspect about the plot
> made from the loaded variables. This is the standard behavior of matlab
> after plotting we get the prompt and we can make another plot if we want to
> compare 2. I know there is subplot option but it will be of small size if I
> need to make a spatial map at to time intervals and compare. The detail of
> my matplotlib is below
>
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> I use Ubuntu 12.04 64 bit version
> and
>
> In [3]: matplotlib.get_backend()
> Out[3]: 'WXAgg'
>
> In [4]: matplotlib.__version__
> Out[4]: '1.2.0'
>
> with best regards,
> Sudheer
> ***************************************************************
> Sudheer Joseph
> Indian National Centre for Ocean Information Services
> Ministry of Earth Sciences, Govt. of India
> POST BOX NO: 21, IDA Jeedeemetla P.O.
> Via Pragathi Nagar,Kukatpally, Hyderabad; Pin:5000 55
> Tel:+91-40-23886047(O),Fax:+91-40-23895011(O),
> Tel:+91-40-23044600(R),Tel:+91-40-9440832534(Mobile)
> E-mail:sjo...@gm...;sud...@ya...
> Web- http://oppamthadathil.tripod.com
> ***************************************************************
>   ------------------------------
> *.*
>
>
>
> ------------------------------------------------------------------------------
> Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester
> Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the
> endpoint security space. For insight on selecting the right partner to
> tackle endpoint security challenges, access the full report.
> http://p.sf.net/sfu/symantec-dev2dev
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>
>
>
>