Re: [mantisbt-dev] Mantis not working behind a reverse-proxy

[Louis B. <lba...@gm...>]

In deed, we have mantis listening internal on http://172.x.x.x and
accessible on the external with https://88.x.x.x (the reverse-proxy).

I'm fine if users access only via https, that's what I did for CodevTT.
I'll try the $g_path  patch asap.



Louis BAYLE
Tel: +33 (0)4.42.604.734
lba...@gm...

On Sun, Oct 19, 2014 at 1:06 AM, P Richards <pa...@ma...> wrote:

> If I’m correct about what the issue is likely to be, the problem might
> actually be ‘worse’ in 1.3-dev – however unless I’m mistaken here:
>
>
>
> Unless you are saying that the INTERNAL and EXTERNAL path to mantis is
> different, it should be a case of setting $g_path to the final path:
>
>
>
> $g_path               = $t_protocol . '://' . $t_host . $t_path;
>
>
>
> i.e.
>
>
>
> if you have mantis listening on http, with a loadbalancing reverse proxy
> in front running https, whilst Mantis will detect http://www.foo.com, if
> you set
>
>
>
> $g_path = https://www.foo.com in the config file that should work I
> believe.
>
>
>
>
>
> If you are saying that you use http://mantis.internal and www.foo.org
> depending on whether users are internal or external to the corporate
> network, then this might be more of an issue.
>
>
>
> Looking at the code, we seem to generate a mixture of absolute and
> relative links within a page in both 1.2 and 1.3 – the $g_path fix should
> be fine for the reverse proxy case, however, the absolute links will need
> to go to deal with the split-dns case.
>
>
>
> Paul
>
>
>
>
>
> *From:* Louis BAYLE [mailto:lba...@gm...]
> *Sent:* 18 October 2014 23:16
> *To:* developer discussions
> *Subject:* Re: [mantisbt-dev] Mantis not working behind a reverse-proxy
>
>
>
> Yes, I can install a mantis 1.3-dev on our server and test it.
>
> I'm not sure I'll have time to do that next week, but I'll let you know.
>
>
> Louis BAYLE
> Tel: +33 (0)4.42.604.734
> lba...@gm...
>
>
>
> On Sat, Oct 18, 2014 at 11:55 PM, Paul Richards <
> gra...@bl...> wrote:
>
> Are you able to test if the situation is any better with 1.3-dev?
>
>
>
> If this is an absolute vs relative link type issue, (which I’m guessing it
> is) I’m not sure if the situation is improved in 1.3
>
>
>
> Paul
>
>
>
> *From:* Louis BAYLE [mailto:lba...@gm...]
> *Sent:* 18 October 2014 22:44
> *To:* developer discussions
> *Subject:* [mantisbt-dev] Mantis not working behind a reverse-proxy
>
>
>
> Is there a 'good patch' to fix this realy problematic bug in Mantis ?
>
> The patch I applied to our installation does not work very well.
> IMHO this is realy a critical bug.
>
>
> http://www.mantisbt.org/bugs/view.php?id=13056
> http://www.mantisbt.org/bugs/view.php?id=9333
>
> Louis BAYLE
> Tel: +33 (0)4.42.604.734
> lba...@gm...
>
>
>
> ------------------------------------------------------------------------------
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
> http://p.sf.net/sfu/Zoho
> _______________________________________________
> mantisbt-dev mailing list
> man...@li...
> https://lists.sourceforge.net/lists/listinfo/mantisbt-dev
>
>
>
>
> ------------------------------------------------------------------------------
> Comprehensive Server Monitoring with Site24x7.
> Monitor 10 servers for $9/Month.
> Get alerted through email, SMS, voice calls or mobile push notifications.
> Take corrective actions from your mobile device.
> http://p.sf.net/sfu/Zoho
> _______________________________________________
> mantisbt-dev mailing list
> man...@li...
> https://lists.sourceforge.net/lists/listinfo/mantisbt-dev
>
>