Hi,
thanks for bringing us linwizard at first!
I used an older version of linwizard on my htc touch which is an OMAP850 cpu. It worked well (reached the xsession!) but now the 0.2 version doesn't work anymore. I've got either a black or white screen after the kernel launch (depend of the mtype). I used 6666 as mtype when it worked before, i tried to find the right mtype for my htc touch but this model is not on the mtype list...
Here some infos from my haret 0.5.1 log:
Unable to load library 'ace_ddi'
WinCE reports memory size 134217728 (phys=112914432 store=151240704)
Detecting current machine
Trying to detect machine (Plat='PocketPC' OEM='ELF010050')
Wince reports processor: core= name=OMAP850-201MHz cat= vend=TI
Minimal virtual address: 00010000, maximal virtual address: 7FFFFFFF
Detected machine Generic TI OMAP/OMAP850 (Plat='PocketPC' OEM='ELF010050')
CPU is ARM ARM arch 5TEJ stepping 3 running in system mode
Built virtual to physical page mapping
Allocated 5734 pages (tags=56000000/17860000 kernel=56001000/17861000 initrd=5625D000/17abd000 index=5765D000/14c58000)
Built kernel tags area
Built page index
Video buffer at 4E000020 sx=240 sy=320 mx=60 my=53
Video Phys FB=20001020 Fonts=14c51064
preload=2264@57665000/14c50000 sj=57665000 stack=57663000/14c52000 data=57664000/14c51000 exec=14c50128
Reading 2473664 bytes...
Read complete
Reading 20971520 bytes...
Read complete
Launching to physical address 14c50010
Trampoline setup (tram=136@000241C0/120241c0/107411c0)
MMU setup: mmu=AC3C0000/103c0000
Go Go Go...
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
thank you for the reply.
i changed the mtype and it works now! but only after a hard reboot.
i'd like to test betas for sure, so i'm your man.
I do all my code under windows, so is it possible to compile linwizard using cygwin ? if yes, how to access the svn ?
by the way, i worked hard to find it, but I have the right drivers to the ethernet gadget for the htc elf and so if someone want them for xp just tell me.
alex
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
thanks for bringing us linwizard at first!
I used an older version of linwizard on my htc touch which is an OMAP850 cpu. It worked well (reached the xsession!) but now the 0.2 version doesn't work anymore. I've got either a black or white screen after the kernel launch (depend of the mtype). I used 6666 as mtype when it worked before, i tried to find the right mtype for my htc touch but this model is not on the mtype list...
Here some infos from my haret 0.5.1 log:
Unable to load library 'ace_ddi'
WinCE reports memory size 134217728 (phys=112914432 store=151240704)
Detecting current machine
Trying to detect machine (Plat='PocketPC' OEM='ELF010050')
Wince reports processor: core= name=OMAP850-201MHz cat= vend=TI
Minimal virtual address: 00010000, maximal virtual address: 7FFFFFFF
Detected machine Generic TI OMAP/OMAP850 (Plat='PocketPC' OEM='ELF010050')
CPU is ARM ARM arch 5TEJ stepping 3 running in system mode
Built virtual to physical page mapping
Allocated 5734 pages (tags=56000000/17860000 kernel=56001000/17861000 initrd=5625D000/17abd000 index=5765D000/14c58000)
Built kernel tags area
Built page index
Video buffer at 4E000020 sx=240 sy=320 mx=60 my=53
Video Phys FB=20001020 Fonts=14c51064
preload=2264@57665000/14c50000 sj=57665000 stack=57663000/14c52000 data=57664000/14c51000 exec=14c50128
Reading 2473664 bytes...
Read complete
Reading 20971520 bytes...
Read complete
Launching to physical address 14c50010
Trampoline setup (tram=136@000241C0/120241c0/107411c0)
MMU setup: mmu=AC3C0000/103c0000
Go Go Go...
6666 was the old mtype. The wizard now uses type 1229.
That might be part of it. Also try turning on flight mode (disable GSM) some people report that helping.
The code should hypothetically run on the touch/elf. I seem to remember someone on IRC reporting that it worked.
Linwizard is in process of trying to support more devices, if you're willing to be a test guinea pig, let us know!
Do you have a copy of the code?
silven
thank you for the reply.
i changed the mtype and it works now! but only after a hard reboot.
i'd like to test betas for sure, so i'm your man.
I do all my code under windows, so is it possible to compile linwizard using cygwin ? if yes, how to access the svn ?
by the way, i worked hard to find it, but I have the right drivers to the ethernet gadget for the htc elf and so if someone want them for xp just tell me.
alex