[leaf-user] Problem accessing Weblet after changing to a internal public ip number

[Robert M. <Rob...@la...>]

Hello,
	I have a problem accessing the weblet page after I have changed
the internal ip numbers to a public address. I am using Bering Stable
1.2 with two interfaces eg ppp0 and eth0. Both are using public ip
numbers. I am not able to access the firewall web page. I doubled
checked all my settings including all the settings in Shorewall.
Everything else works fine. I even built another system as a test. And
still, I am unable to get access to the web page. I then decided to
build another system and use the distro as it comes from the floppy
image. The only changes I made was the external ip number and added a
driver for my network card. I am using eth0 and eth1 and NAT. Eg public
ip on eth0 and private on eth1. All works fine. So the only conclusion
that I can come to is that there is something still referring to the
private address range in the original system. I have had a poke around
and can not find anything that I feel would cause this.

	So what else should I be checking? Any other ideas? Thanks in
advance for any help.

Regards,
Robert McRostie.