[Lcms-user] Again LCMS and Negatives ICC profiling
An ICC-based CMM for color management
Brought to you by:
mm2
From: <ma...@li...> - 2002-12-13 12:49:19
|
Few months ago I wrote about problems with recent versions. Now I made scans using LS2000 scanner and RAW mode. I used Wolf IT8-2 target with densitometric data below: [GS patches] IT8-2 Density [BARBIERI B/W Densitometer Densy 210E] 0 0,02 0,04 0,02 1 0,09 0,14 0,12 2 0,16 0,2 0,18 3 0,22 0,27 0,25 4 0,27 0,33 0,31 5 0,33 0,39 0,38 6 0,41 0,47 0,46 7 0,48 0,55 0,54 8 0,55 0,62 0,61 9 0,64 0,7 0,7 10 0,72 0,8 0,79 11 0,81 0,89 0,88 12 0,92 0,99 0,98 13 1,02 1,11 1,09 14 1,12 1,23 1,2 15 1,24 1,36 1,33 16 1,36 1,48 1,44 17 1,49 1,61 1,57 18 1,62 1,75 1,68 19 1,77 1,92 1,83 20 1,9 2,05 2,01 21 1,96 2,11 2,09 22 2,1 2,21 2,17 23 2,14 2,22 2,16 I don't remeber but ver. 1.08 or earlier produce very good matches but recent can't on any settings. I don't now why since the curves are simple. I can create much better results using simple LUTs and some Hue-Sat corerction [or 3x3 matrix]. The example of correction curve I attached in this e-mail. Can I get earlier version? With Best Regards, -- Jacek Zagaja, "Good composition is the best GG: 4252883 way of seeing" --------------r-e-k-l-a-m-a----------------- Swieta tuz tuz! http://swieta.onet.pl |