Re: [K3b-user] Can't burn cds anymore - Input/Output Error

[Markus T. <tra...@fs...>]

I rebuilt every package k3b uses, but nothing changed...

This is the log while trying to burn an mp3 file. Error was "Error while=20
decoding audio file".

I think i'll try burning with nero and windows xp to verify the burner isn'=
t=20
damaged...

bye
Markus


System
=2D----------------------
K3b Version: 0.11.5
KDE Version: 3.2.0
QT Version:  3.3.0

cdrecord
=2D----------------------
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
Cdrecord-Clone 2.01a25-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J=F6=
rg=20
Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <wa...@ma...=
m>.
Note: The author of cdrecord should not be bothered with problems in this=20
version.
TOC Type: 0 =3D CD-DA
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :=20
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-1300A '
Revision       : '1.05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x001B=20
Profile: 0x001A=20
Profile: 0x0014=20
Profile: 0x0013=20
Profile: 0x0011=20
Profile: 0x0010=20
Profile: 0x000A=20
Profile: 0x0009 (current)
Profile: 0x0008 (current)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE=20
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1345536 =3D 1314 KB
=46IFO size      : 4194304 =3D 4096 KB
pregap1: -1
Track 01: audio   62 MB (06:13.26) no preemp swab copy
Total size:       62 MB (06:13.26) =3D 27995 sectors
Lout start:       63 MB (06:15/20) =3D 27995 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -12508 (97:15/17)
  ATIP start of lead out: 359845 (79:59/70)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 22
Manufacturer: Ritek Co.
Blocks total: 359845 Blocks current: 359845 Blocks remaining: 331850
Starting to write CD/DVD at speed  16.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=3D0
BURN-Free is ON.
Performing OPC...
Sending CUE sheet...
/usr/bin/cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of   62 MB written.
Track 01:    1 of   62 MB written (fifo  76%) [buf  92%]   1.7x.
Track 01:    2 of   62 MB written (fifo  78%) [buf  80%]   0.1x.
Track 01:    3 of   62 MB written (fifo  53%) [buf  54%]   1.7x.
Track 01:    4 of   62 MB written (fifo  26%) [buf  20%]   1.8x.
Track 01:    5 of   62 MB written (fifo   1%) [buf  24%]   1.4x.
Track 01:    6 of   62 MB written (fifo   3%) [buf  94%]   0.2x.
/usr/bin/cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB:  2A 00 00 00 0A C2 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 08 1E 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 2078 (not valid)=20
cmd finished after 13.151s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 6477408 bytes
Writing  time:   40.721s
Average write speed   1.1x.
Min drive buffer fill was 20%
=46ixating...
=46ixating time:    0.001s
BURN-Free was 1 times used.
/usr/bin/cdrecord: fifo had 166 puts and 103 gets.
/usr/bin/cdrecord: fifo was 11 times empty and 2 times full, min fill was 0=
%.

cdrecord comand:
=2D----------------------
/usr/bin/cdrecord -v gracetime=3D2 dev=3D0,0,0 speed=3D16 -dao driveropts=
=3Dburnfree=20
=2Deject -useinfo -pad -audio /tmp/kde-root/k3b_audio_Fusion0_01.inf=20