| 427 |
Intermittently receiving responses from ECUs on the 'ignore list'. |
Ver 16.07.03 |
open |
Kevin Stofflet
|
2020-12-04
|
2020-12-04
|
5 |
|
| 401 |
ECU responses not being received by J1699-3. |
Ver 16.05.00 |
open |
Kevin Stofflet
|
2019-09-06
|
2019-09-06
|
5 |
|
| 400 |
Some SID $06 MID $02 evalutations produce false failures. |
Ver 16.05.00 |
open |
Kevin Stofflet
|
2019-09-06
|
2019-09-06
|
5 |
|
| 388 |
Messages with a data length of zero will cause J1699-3 to crash. |
Ver 16.02.03 |
open |
|
2018-05-22
|
2018-05-22
|
5 |
|
| 387 |
On the Windows 10 O/S, vehicles get stuck in Test 11.2 because J1699-3 does not register an OBDCOND increment even though it did increment. |
Ver 16.02.03 |
open |
|
2018-05-22
|
2018-05-22
|
5 |
|
| 378 |
Test 11.2 should abort when it gets a J2534-1 error instead of continually writing errors to the log file. |
Ver 16.00.01 |
open |
|
2017-11-17
|
2017-11-17
|
5 |
|
| 376 |
In Test 11.2, the new SID $01 PID $01 bits (Table 342 from V16.1 doc.) must be checked. |
Ver 16.00.01 |
open |
Kevin Stofflet
|
2017-10-20
|
2017-12-06
|
5 |
|
| 365 |
On V15.02.00 in Test 5.17, a SID $9 INF $6 request sent before all ECUs had completed the SID $9 INF $4 responses. |
Ver 15.02.00 |
open |
|
2016-08-16
|
2016-08-25
|
5 |
|
| 360 |
The Tester Present in Test 5.19 should go out at 4.9 second intervals, but it is going out at 2 second intervals. |
Ver 15.00.04 |
open |
|
2016-03-11
|
2016-03-11
|
5 |
|
| 353 |
When entering the dynamic tests for a second time, if prompted for a file name (because of a MY mis-match) the original file will sometimes get overwritten. |
Ver 14.08.03 |
open |
|
2015-12-18
|
2015-12-18
|
5 |
|
| 331 |
In test 9.5, the loss of a segmented message not flagged. |
Ver 14.09.08 |
open |
|
2014-10-10
|
2014-10-10
|
5 |
|
| 310 |
Test 7.5, fails a good ECU if second ECU replys with NRC. |
None |
open |
|
2013-04-12
|
2013-04-12
|
5 |
|
| 308 |
CVN decode from V14.06.01 does not match raw data. |
None |
open |
|
2013-02-11
|
2013-02-11
|
5 |
|
| 303 |
Version 14.07.02 Test 5.6: Comparison of PID $01 and PID $41 |
None |
open-fixed |
Kevin Stofflet
|
2012-10-26
|
2012-11-16
|
5 |
|
| 297 |
Internal failure in remote control |
None |
open |
|
2012-05-16
|
2012-05-16
|
5 |
|
| 280 |
Test 11.3 does not check SID $01 PID $31 after a re-enter. |
None |
open-fixed |
Kevin Stofflet
|
2011-04-25
|
2012-12-13
|
5 |
|
| 259 |
ISO 15765 250K Init causes PCM to go BUS_OFF. |
None |
open |
|
2010-05-07
|
2010-05-07
|
5 |
|
| 198 |
Use SID $09 INF $06 as a keep-alive for a CVN request. |
None |
open |
|
2008-04-22
|
2008-04-22
|
5 |
|
| 197 |
Allow up to 1 min. for a SID $09 INF $06 response. |
None |
open |
|
2008-04-22
|
2008-04-22
|
5 |
|
| 146 |
Check return codes everywhere |
Ver 10.2.2 |
open |
|
2007-03-26
|
2007-03-26
|
5 |
|
| 115 |
Software performs some tests in a different order. |
None |
open |
|
2006-05-10
|
2006-05-10
|
1 |
|
| 61 |
No tester present when user is prompted with an error. |
None |
open |
Kevin Stofflet
|
2005-06-29
|
2005-06-29
|
5 |
|
| 46 |
Table A not done for legacy protocols. |
None |
open |
Kevin Stofflet
|
2005-05-03
|
2005-05-03
|
5 |
|
| 18 |
V11.4.3 Test 5.6 Mode 1 PID Tests |
None |
open |
|
2005-01-07
|
2005-01-07
|
5 |
|
