I would like to change the serial number of the Fujitsu PRIMERGY RX2530M1, but it is not possible.
ifru -s <serial number="">
command is input, but writing ends with an error.
This Server synchronizes information between the motherboard and the front panel, which we call the chassis, and I think this has something to do with it.
If there is a way to use ipmiutil or ifru or another way to write serial numbers to chassis and motherboard respectively
It would be helpful if you could tell me.
Thank you.</serial>
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I would like to change the serial number of the Fujitsu PRIMERGY RX2530M1,
but it is not possible.
ifru -s <serial number="">
command is input, but writing ends with an error.
This Server synchronizes information between the motherboard and the front
panel, which we call the chassis, and I think this has something to do with
it.
If there is a way to use ipmiutil or ifru or another way to write serial
numbers to chassis and motherboard respectively
It would be helpful if you could tell me.
</serial>
I would like to change the serial number of the Fujitsu PRIMERGY RX2530M1, but it is not possible.
ifru -s <serial number="">
command is input, but writing ends with an error.
This Server synchronizes information between the motherboard and the front panel, which we call the chassis, and I think this has something to do with it.
If there is a way to use ipmiutil or ifru or another way to write serial numbers to chassis and motherboard respectively
It would be helpful if you could tell me.
Thank you.</serial>
It could be an issue with specifying the field, or a restriction built into
the firmware.
If you could send the ifru debug output for this command adding -x, we
should be able to find the cause.
Andy
On Sat, May 20, 2023 at 1:34 AM u-sanada bengal00@users.sourceforge.net
wrote: