Re: [IPCop-devel] [2.0] release of v1.9.11, SVN #4161

[Bob B. <gra...@sp...>]

Guenter wrote:

>> 1.9.11 PXE installed without a problem on my Alix 2D13n No sign of
>> the 'Bootloader installation error' seen by Guenter.
> woah, feared something like that already :)
> what size / brand is your CF card ? CHS or LBA mode set in bios setup?
> mine is a 512MB Transcend Industrial ...

Here is my disk info:

CompactFlash ATA device
        Model Number:       SanDisk SDCFX3-004G                     
        Serial Number:      116913F1109O4304
        Firmware Revision:  HDX 4.32
Standards:
        Supported: 4 
        Likely used: 4
Configuration:
        Logical         max     current
        cylinders       7964    7964
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:    8027712
        LBA    user addressable sectors:    8027712
        Logical/Physical Sector size:           512 bytes
        device size with M = 1024*1024:        3919 MBytes
        device size with M = 1000*1000:        4110 MBytes (4 GB)
        cache/buffer size  = 1 KBytes (type=DualPort)
Capabilities:
        LBA  IORDY(may be)(cannot be disabled)
        Standby timer values: spec'd by Vendor
        R/W multiple sector transfer: Max = 4   Current = 0
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 (?)
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4 
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
                Write cache
           *    CFA feature set
           *    CFA advanced modes: pio5 *pio6 

> as it appears I probably need a newer revision of the Alix board since
> my wireless N cards also do not work (both TL-WN961N and TL-WN861N);
> while my G cards work fine (TL-WN660G and Compex-WLM54G) ...

I gave up trying to get the stock AW-NE766 wireless adaptor that is 
fitter to an EEEPC working and replaced it with an Intel 3945ABG which 
worked first time. There seems to be problems getting a suitable driver 
for some boards. There is a compatibility list here:

http://linux-wless.passys.nl/

which you may find useful although none of your boards seem to be listed 
there.

Bob