Menu
▾
▴
Re: [Hplip-help] Supplies on BIJ1100DTN
|
From: Aaron <ke...@gm...> - 2007-05-02 18:39:27
|
And the supplies are still not working? Can you run: /usr/lib/cups/backend/hp and post the output as well? Thanks! A On 5/2/07, DenisS <den...@fr...> wrote: > > Aaron <ke7ezt <at> gmail.com> writes: > > > > > > > It doesn't apprear that your printer is configured for HPLIP. Can you > run > hp-setup to add the printer, and then run hp-check again?Thanks!A > > > > On 5/2/07, > > Ok. I run hp-setup. > > * Choose 'Network/Ethernet/Wireles (direct connection or JetDirect) since > it's a network printer with JetDirect 200m) > > * hp-setup detects HP Business Inkjet 1100 at 192.168.0.200 and generates > URI : hp:/net/hp_business_inkjet_1100?ip=192.168.0.200 > > * hp-setup select /usr/share/ppd/HP-Business_Inkjet_1100-hpijs.ppd.gz > PPD file. > > Finishing setup. Test page prints correctly. > > Here is hp-check output : > ***** > HP Linux Imaging and Printing System (ver. 1.7.4a) > Dependency/Version Check Utility ver. 5.3 > > Copyright (c) 2001-7 Hewlett-Packard Development Company, LP > This software comes with ABSOLUTELY NO WARRANTY. > This is free software, and you are welcome to distribute it > under certain conditions. See COPYING file for more details. > > > --------------- > | SYSTEM INFO | > --------------- > > Basic system information: > Linux pc-denis 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 > UTC 2007 i686 GNU/Linux > > Detected distro (/etc/issue): > ubuntu 7.04 > > Detected distro (lsb_release): > Ubuntu 7.04 (feisty) > > Currently installed HPLIP version... > HPLIP 1.7.4a currently installed in '/usr/share/hplip'. > > Current contents of '/etc/hp/hplip.conf' file: > # hplip.conf > > [hpiod] > # port=0 (dynamic IP port) > port=2208 > [hpssd] > # port=0 (dynamic IP port) > port=2207 > > [hplip] > version=1.7.4a > jdprobe=0 > > [dirs] > home=/usr/share/hplip > run=/var/run > ppd=/usr/share/ppd/HP > ppdbase=/usr/share/ppd > doc=/usr/share/doc/hplip-1.7.4a > > # Following values are determined at configure time and cannot > be changed. > [configure] > network-build=1 > pp-build=0 > gui-build=1 > scanner-build=0 > fax-build=0 > cups11-build=0 > installinitd=/usr/lib/lsb/install_initd > chkconfig= > internal-tag=1.7.4.13 > > > HPLIP running? > Yes, HPLIP is running (OK). > > HPOJ running? > No, HPOJ is not running (OK). > > Checking Python version... > OK, version 2.5.1 installed > > Checking PyQt version... > OK, version 3.17 installed. > > Checking SIP version... > OK, Version 4.5 installed > > ---------------- > | DEPENDENCIES | > ---------------- > > > Checking for dependency libcrypto - OpenSSL cryptographic library... > OK, found. > > Checking for dependency gcc - GNU Project C and C++ Compiler... > OK, found. > > Checking for dependency SANE - Scanning library... > OK, found. > > Checking for dependency GhostScript - PostScript and PDF language > interpreter and previewer... > OK, found. > > Checking for dependency libjpeg - JPEG library... > OK, found. > > Checking for dependency libpthread - POSIX threads library... > OK, found. > > Checking for dependency make - GNU make utility to maintain groups of > programs... > OK, found. > > Checking for dependency python-devel - Python development files... > OK, found. > > Checking for dependency Reportlab - PDF library for Python... > OK, found. > > Checking for dependency PyQt - Qt interface for Python... > OK, found. > > Checking for dependency cups-devel- Common Unix Printing System > development files... > OK, found. > > Checking for dependency ppdev - Parallel port support kernel > module.... > OK, found. > > Checking for dependency libusb - USB library... > OK, found. > > Checking for dependency scanimage - Shell scanning program... > OK, found. > > Checking for dependency libnetsnmp-devel - SNMP networking library > development > files... > OK, found. > > Checking for dependency Python 2.2 or greater - Python programming > language... > OK, found. > > Checking for dependency LSB - Linux Standard Base support... > OK, found. > > Checking for dependency xsane - Graphical scanner frontend for SANE... > OK, found. > > Checking for dependency cups - Common Unix Printing System... > OK, found. > > Checking for dependency Python 2.3 or greater - Required for fax > functionality... > OK, found. > > > ---------------------- > | INSTALLED PRINTERS | > ---------------------- > > > warning: No queues found. > > ---------------------- > | SANE CONFIGURATION | > ---------------------- > > 'hpaio' in '/etc/sane.d/dll.conf'... > OK, found. SANE backend 'hpaio' is properly set up. > > Checking output of 'scanimage -L'... > > No scanners were identified. If you were expecting something different, > check that the scanner is plugged in, turned on and detected by the > sane-find-scanner tool (if appropriate). Please read the documentation > which came with this software (README, FAQ, manpages). > > > --------------------- > | PYTHON EXTENSIONS | > --------------------- > > Checking 'cupsext' CUPS extension... > OK, found. > > Checking 'pcardext' Photocard extension... > OK, found. > > > No errors detected. > ***** > > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by DB2 Express > Download DB2 Express C - the FREE version of DB2 express and take > control of your XML. No limits. Just data. Click to get it now. > http://sourceforge.net/powerbar/db2/ > _______________________________________________ > HPLIP-Help mailing list > HPL...@li... > https://lists.sourceforge.net/lists/listinfo/hplip-help > -- I don't care, I'm still free. You can't take the sky from me. - "Firefly" - Ubuntu User: #11105 Ubuntu Linux http://ubuntulinux.org |
