From: SourceForge.net <no...@so...> - 2006-03-02 22:54:45
|
Feature Requests item #1442115, was opened at 2006-03-02 23:54 Message generated for change (Tracker Item Submitted) made by Item Submitter You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1442115&group_id=8874 Please note that this message will contain a full copy of the comment thread, including the initial issue submission, for this request, not just the latest update. Category: camera support Group: None Status: Open Resolution: None Priority: 5 Submitted By: José Antonio (vplabs) Assigned to: Nobody/Anonymous (nobody) Summary: Support for Olympus C55Z/C5500Z Initial Comment: I am very interested in gPhoto for a particular project. The camera that I am using is a recento model from Olympus: C55Z in Europe, C5500Z in USA. I've done some tests: It seems to share the same ProdID with another different camera from Olympus. In some cases it's seen as a C-350Z (wrong) whereas in other is seen as C55Z/C5500Z (right) # lsusb Bus 002 Device 003: ID 07b4:0114 Olympus Optical Co., Ltd C-350Z Camera # cat /proc/bus/usb/devices T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=07b4 ProdID=0114 Rev= 1.00 S: Manufacturer=OLYMPUS S: Product=C55Z/C5500Z S: SerialNumber=000727201390 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=100ms # gphoto2 --summary Camera summary: Model: C55Z,C5500Z device version: v77FU-75 serial number: 000727201390 Vendor extension ID: 0x00000000 Vendor extension description: (null) # gphoto2 --auto-detect Model Port ---------------------------------------------------------- Olympus C-370Z usb: # gphoto2 -a Abilities for camera : Olympus C-370Z Serial port support : no USB support : yes Capture choices : : Capture not supported by the driver Configuration support : yes Delete files on camera support : yes File preview (thumbnail) support : yes File upload support : yes Should I create my own camlib file? Can I use the camera with another different ProdID? Thanks in advance. You've done an excelent job!!! Any ideas are welcome, José Antonio Pérez ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1442115&group_id=8874 |