Re: [Gphoto-user] Sony MVC-CD300 - USB

[Walt P. <wpe...@pe...>]

Below is the output of /proc/scsi/usb-storage-0/0 and
cat /proc/bus/usb/devices

localhost tts]# cat /proc/scsi/usb-storage-0/0
   Host scsi0: usb-storage
       Vendor: Sony
      Product: CD Mavica
Serial Number: None
     Protocol: 8020i
    Transport: Control/Bulk
         GUID: 054c00240000000000000000
     Attached: Yes


tts]# cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=dce0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=054c ProdID=0024 Rev= 1.15
S:  Manufacturer=Sony
S:  Product=CD Mavica
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=02 Prot=01 Driver=usb-storage
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl=255ms






> On Sun, Oct 26, 2003 at 03:00:46PM +0100, Walt Pennington wrote:
>> Sony Mavica MVC CD300
>> Mandrake 9.2/9.1
>> Gphoto 2.1.2-1mdk
>>
>> USBView shows that the Sony MVC CD300 is connected.  When I try to use
>> GTKam or FLPhoto, neither will recognize the camera.  From the
>> documentation, it appears that the Sony Mavica MVC CD300 is supported,
>> but
>> I cannot determine where my problem is.
>>
>> When running GTKam, I choose, the camera, and then click detect, and the
>> error message reads that "no camera detected."  I started GTKam from the
>> command line, and did not receive any error messages.
>
> What is the output of "cat /proc/bus/usb/devices" ?
>
> Ciao, Marcus
>