From: SourceForge.net <no...@so...> - 2005-01-12 03:36:39
|
Feature Requests item #1099090, was opened at 2005-01-09 15:33 Message generated for change (Comment added) made by hfiguiere You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1099090&group_id=8874 Category: camera support Group: None Status: Closed Resolution: Fixed Priority: 5 Submitted By: Lars Møller Sørensen (qwezaq) Assigned to: Hubert Figuiere (hfiguiere) Summary: Support for Kodak DC215 Initial Comment: Sigh, I'm always unlucky with hardware support. DC210 and DC220 are supported, but not DC215... Any technical reason, or do you need a tester? I tried with DC210 and DC220, but my camera uses the serial port, which it couldn't find. ---------------------------------------------------------------------- >Comment By: Hubert Figuiere (hfiguiere) Date: 2005-01-11 22:36 Message: Logged In: YES user_id=27487 sorry for the log. just that sf.net bug notification do not show uploads, and I missed it.... (since you didn't tell). Nevermind, since it is solved. and sorry again. ---------------------------------------------------------------------- Comment By: Lars Møller Sørensen (qwezaq) Date: 2005-01-11 21:39 Message: Logged In: YES user_id=1193591 I had attached the output you requested, but never mind, it was a permission problem as marcusmeissner guessed. It works now, thanks for the help. ---------------------------------------------------------------------- Comment By: Hubert Figuiere (hfiguiere) Date: 2005-01-11 11:16 Message: Logged In: YES user_id=27487 If I requested to use gphoto2 as mentionned in my first post, this is because I expected to have the message that gphoto2 provide, which are harder to get with gtkam. The DC-210 driver has actually been tested with a DC-215 (I didn't write it). ---------------------------------------------------------------------- Comment By: Marcus Meissner (marcusmeissner) Date: 2005-01-11 02:21 Message: Logged In: YES user_id=48092 do you have sufficient permissions on /dev/ttyS0 to open/write it as user? can you try gphoto2 commandline as root? ---------------------------------------------------------------------- Comment By: Lars Møller Sørensen (qwezaq) Date: 2005-01-10 18:28 Message: Logged In: YES user_id=1193591 If I in Gtkam uses Model: Kodak DC210 Port: Generic Port (serial:/dev/ttyS0) I get an error: "Could not initialize camera." The camera is turned on and in "Connect"-mode. ---------------------------------------------------------------------- Comment By: Hubert Figuiere (hfiguiere) Date: 2005-01-09 15:37 Message: Logged In: YES user_id=27487 Why do you say "could not find". DC215 being serial only, auto-detect will no work. DC210 driver should work for DC215. DC220 certainly NOT. Can you try gphoto2 --debug -L --camera="Kodak DC210" --port=serial:/dev/ttyS0 and attach the output to this bug ? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1099090&group_id=8874 |