From: SourceForge.net <no...@so...> - 2005-01-11 07:21:58
|
Feature Requests item #1099090, was opened at 2005-01-09 20:33 Message generated for change (Comment added) made by marcusmeissner You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1099090&group_id=8874 Category: camera support Group: None Status: Open Resolution: None Priority: 5 Submitted By: Lars Møller Sørensen (qwezaq) Assigned to: Hubert Figuiere (hfiguiere) Summary: Support for Kodak DC215 Initial Comment: Sigh, I'm always unlucky with hardware support. DC210 and DC220 are supported, but not DC215... Any technical reason, or do you need a tester? I tried with DC210 and DC220, but my camera uses the serial port, which it couldn't find. ---------------------------------------------------------------------- >Comment By: Marcus Meissner (marcusmeissner) Date: 2005-01-11 07:21 Message: Logged In: YES user_id=48092 do you have sufficient permissions on /dev/ttyS0 to open/write it as user? can you try gphoto2 commandline as root? ---------------------------------------------------------------------- Comment By: Lars Møller Sørensen (qwezaq) Date: 2005-01-10 23:28 Message: Logged In: YES user_id=1193591 If I in Gtkam uses Model: Kodak DC210 Port: Generic Port (serial:/dev/ttyS0) I get an error: "Could not initialize camera." The camera is turned on and in "Connect"-mode. ---------------------------------------------------------------------- Comment By: Hubert Figuiere (hfiguiere) Date: 2005-01-09 20:37 Message: Logged In: YES user_id=27487 Why do you say "could not find". DC215 being serial only, auto-detect will no work. DC210 driver should work for DC215. DC220 certainly NOT. Can you try gphoto2 --debug -L --camera="Kodak DC210" --port=serial:/dev/ttyS0 and attach the output to this bug ? ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1099090&group_id=8874 |