[gphoto-features] [ gphoto-Feature Requests-1924511 ] support for Nikon D3

[SourceForge.net <no...@so...>]

Feature Requests item #1924511, was opened at 2008-03-24 13:58
Message generated for change (Comment added) made by os2pat
You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1924511&group_id=8874

Please note that this message will contain a full copy of the comment thread,
including the initial issue submission, for this request,
not just the latest update.
Category: camera support
Group: None
Status: Open
Resolution: None
Priority: 5
Private: No
Submitted By: Pat Shanahan (os2pat)
Assigned to: Nobody/Anonymous (nobody)
Summary: support for Nikon D3

Initial Comment:
Please provide support for 
Nikon D3 
camera


thanks

-- 
os...@ya...


----------------------------------------------------------------------

>Comment By: Pat Shanahan (os2pat)
Date: 2008-03-24 16:10

Message:
Logged In: YES 
user_id=381073
Originator: YES

Bus 001 Device 009: ID 04b0:041b Nikon Corp. 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x04b0 Nikon Corp.
  idProduct          0x041b 
  bcdDevice            1.00
  iManufacturer           1 
  iProduct                2 
  iSerial                 3 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0



per your request  :^)

tks,


----------------------------------------------------------------------

Comment By: Marcus Meissner (marcusmeissner)
Date: 2008-03-24 16:04

Message:
Logged In: YES 
user_id=48092
Originator: NO

The generic PTP support will support the camera just fine, same for USB
Mass Storage.

(just because it is not listed does not mean it is not supported, it will
be "USB PTP Class Camera" in this case.)

If you have the USB IDs for this camera in PTP mode, we can add it by
name. Please provide "lsusb -v" output.

----------------------------------------------------------------------

Comment By: Pat Shanahan (os2pat)
Date: 2008-03-24 15:52

Message:
Logged In: YES 
user_id=381073
Originator: YES

Yes, the D3 is available directly, but also the D[100,200,300].  I
believe
that Showfoto depends on gphoto2 to provide access to raw files and the D3

support is not there.

Thankyou,

----------------------------------------------------------------------

Comment By: Hubert Figuiere (hfiguiere)
Date: 2008-03-24 14:18

Message:
Logged In: YES 
user_id=27487
Originator: NO

this camera should mount directly and/or be recognized as PTP by
libgphoto2.

what is the problem?

----------------------------------------------------------------------

You can respond by visiting: 
https://sourceforge.net/tracker/?func=detail&atid=358874&aid=1924511&group_id=8874