Re: 5.2-stable regression for log axes still not fixed completely

[Achim G. <Str...@ne...>]

Achim Gratz writes:
>>> I have to get to the bottom of it later.  The only other difference to
>>> 5.0.7 I've noticed is that the key box in some cases overlaps with some
>>> labeling outside the main plot area.  Again, I don't know exactly when
>>> and why that happens, but I will eventually try to find out.
>>
>> Are these 3D plots?
>
> No, distribution plots, sometimes with reversed and/or logarithmic axes.
>
>> Have a look at the documentation for "set key fixed".
>
> I'll have to trace the same steps as outlined above, then I can be back
> with more questions (unless it's already obvious by then).

This happens because the timestamp position changes in 5.2.x from
inbetween the axis labeling and a key box in the bottom margin to the
actual bottom of the margin.  I've confirmed that the position was
inbetween the two parts from at least 4.0 onwards to 5.0.7.  There is
some space inbetween the axis labeling and the key box title that looks
like a leftover from the previous behaviour.

In addition poking around the key box settings has revealed a few other
things that seem buggy and/or underdocumented, I'll make separate posts
about them later.


Regards,
Achim.
-- 
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+

SD adaptations for Waldorf Q V3.00R3 and Q+ V3.54R2:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada