gnuplot-beta

Re: inquiry make documentation on native windows

[Tatsuro M. <tma...@ya...>]

Ethan
Thank you for your reply.

> That would not surprise me. I broke it on linux also :-(
> See Bug #2453
> I tried to fix that, but it could be that I made things worse.
> 
> 
> Is it this file?
>    .../config/mingw/Makefile
> 
> How is that file generated?
> Is it automatically created or is it edited by hand?

On native windows, there are no mechanisms for automatic generation for Makefile 
and need to edit it by hand.
I usually store the changes into the diff file and restore the changes by patch command at each cloning file image.

> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> index 3c578b27e..80b4824c0 100644
> --- a/config/mingw/Makefile
> +++ b/config/mingw/Makefile
> @@ -955,6 +955,9 @@ gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.te
>  	cp gnuplot-figures.tex gp_tex2.tex
>  	echo "\usepackage{graphicx}" > pdffigures.tex
>  	echo "\usepackage{picins}" >> pdffigures.tex
> +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> +	echo "}" >> gpinsetfigure.tex
>  	# Call LaTeX three times to get the toc right.
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

I attached the above patch, situation will be better but is not complete yet,
I met the error below in both MikTeX on windows and TeXLive2021 on the cygwin64.

****************************************************************************
(gpinsetfigure.tex

! LaTeX Error: Command \gpinsetfigure already defined.
               Or name \end... illegal, see p.192 of the manual.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...

l.6 }

?
****************************************************************************

> 良いお年を

Year I am glad to hear your message and am happy spending good new year days.
A happy new year!

Tatsuro


 
> On Saturday, 1 January 2022 21:31:47 PST Tatsuro MATSUOKA wrote:
> > In development source (5.5), 'make docs' stops at the below
> > 
> > *********************************************
> >  ! Undefined control sequence.
> > l.1626 \gpinsetfigure
> >                      {figure_E0}
> > ?
> > *********************************************
> > 
> > All outputs are given
> > http://tmacchant33.starfree.jp/Files/latex-error.txt
> > 
> > The error does not occur in Cygwin build.
> > 
> > For native windows build, I have used the MikTeX that are usable  without problem until 5.4 sources.
> > 
> > Today I tried to use Cygwin's Texlive 2021 in the mingw build, the results are almost the same.
> >  
> > Any suggestions are welcome.
> 
> 
> At the very top of your log file are these lines
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
>    $ PATH=/f/Programs/MiKTeX/miktex/bin/x64:$PATH make docs
>    cp gnuplot-figures.tex gp_tex2.tex
>    echo "\usepackage{graphicx}" > pdffigures.tex
>    echo "\usepackage{picins}" >> pdffigures.tex
>    # Call LaTeX three times to get the toc right.
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> 
> I think this means that your build path under Windows uses a Makefile
> I did not know about and therefore failed to include when modifying
> the mechanism for figure generation in commits    0a0a64   12aabd   
> 
> That would not surprise me. I broke it on linux also :-(
> See Bug #2453
> I tried to fix that, but it could be that I made things worse.
> 
> 
> Is it this file?
>    .../config/mingw/Makefile
> 
> How is that file generated?
> Is it automatically created or is it edited by hand?
> 
> I think that the patch below would fix the problem you show,
> but I don't know whether to apply it to that file directly or
> apply it to a higher-level Makefile.am or Makefile.in.
> 
> 
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> index 3c578b27e..80b4824c0 100644
> --- a/config/mingw/Makefile
> +++ b/config/mingw/Makefile
> @@ -955,6 +955,9 @@ gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.te
>  	cp gnuplot-figures.tex gp_tex2.tex
>  	echo "\usepackage{graphicx}" > pdffigures.tex
>  	echo "\usepackage{picins}" >> pdffigures.tex
> +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> +	echo "}" >> gpinsetfigure.tex
>  	# Call LaTeX three times to get the toc right.
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> 
> 良いお年を
> 
> Ethan
> 

Re: inquiry make documentation on native windows

[Tatsuro M. <tma...@ya...>]

Ethan

Thank you for your reply again

Unfortunately the below patch gives a different error.
On MikTeX

(f:\programs\MiKTeX\tex/latex/tools\longtable.sty)

LaTeX Warning: \include should only be used after \begin{document} on input lin
e 42.

(gpinsetfigure.tex

! LaTeX Error: Command \gpinsetfigure already defined.
               Or name \end... illegal, see p.192 of the manual.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...

l.6 }

?

On TeXLive on cygwin

(/usr/share/texmf-dist/tex/latex/tools/longtable.sty)
\@input{gpinsetfigure.aux}
(./gpinsetfigure.tex

! LaTeX Error: Command \gpinsetfigure already defined.
               Or name \end... illegal, see p.192 of the manual.

See the LaTeX manual or LaTeX Companion for explanation.
Type  H <return>  for immediate help.
 ...

l.6 }

?


Tatsuro


> ----- Original Message -----
> 
 
> On Sunday, 2 January 2022 05:20:28 PST Tatsuro MATSUOKA wrote:
> > Ethan
> > Thank you for your reply.
> > > 
> > I attached the above patch, situation will be better but is not complete yet,
> > I met the error below in both MikTeX on windows and TeXLive2021 on the cygwin64.
> > 
> > ****************************************************************************
> > (gpinsetfigure.tex
> > 
> > ! LaTeX Error: Command \gpinsetfigure already defined.
> >                Or name \end... illegal, see p.192 of the manual.
> 
> 
> I apologize.  The patch I gave was incomplete.
> It should also have changed the previous two lines in the Makefile.
> Here is a more complete patch:
> 
> 	Ethan
> 
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> index 3c578b27e..cc0adcce5 100644
> --- a/config/mingw/Makefile
> +++ b/config/mingw/Makefile
> @@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
>  
>  gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
>  	cp gnuplot-figures.tex gp_tex2.tex
> -	echo "\usepackage{graphicx}" > pdffigures.tex
> -	echo "\usepackage{picins}" >> pdffigures.tex
> +	echo "\usepackage{graphicx}" > gpinsetfigures.tex
> +	echo "\usepackage{picins}" >> gpinsetfigures.tex
> +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> +	echo "}" >> gpinsetfigure.tex
>  	# Call LaTeX three times to get the toc right.
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> 
> 
> 
> 

Re: inquiry make documentation on native windows

[Ethan A M. <me...@uw...>]

On Sunday, 2 January 2022 14:36:59 PST Tatsuro MATSUOKA wrote:
> Ethan
> 
> Thank you for your reply again
> 
> Unfortunately the below patch gives a different error.
> On MikTeX
> 
> (f:\programs\MiKTeX\tex/latex/tools\longtable.sty)
> 
> LaTeX Warning: \include should only be used after \begin{document} on input lin
> e 42.

I have never seen that error message.
Perhaps this is a difference between MiKTeX and TexLive?
You could try changing the word "include" to "input" on line 42 of titlepag.tex

   % This is only needed if you want to embed figures
-  \include{gpinsetfigure}
+  \input{gpinsetfigure}


> (gpinsetfigure.tex
> 
> ! LaTeX Error: Command \gpinsetfigure already defined.
>                Or name \end... illegal, see p.192 of the manual.

This one makes no sense to me.
Please check the content of gpinsetfigure.tex
It should look like this:

[~/git/gnuplot-main/docs] cat gpinsetfigure.tex
\usepackage{graphicx}
\usepackage{picins}
\newcommand{\gpinsetfigure}[1]{
  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}
}

There should be no "\end" in the file, and the definition of
gpinsetfigure should appear only once.

	Ethan

> See the LaTeX manual or LaTeX Companion for explanation.
> Type  H <return>  for immediate help.
>  ...
> 
> l.6 }
> 
> ?
> 
> On TeXLive on cygwin
> 
> (/usr/share/texmf-dist/tex/latex/tools/longtable.sty)
> \@input{gpinsetfigure.aux}
> (./gpinsetfigure.tex
> 
> ! LaTeX Error: Command \gpinsetfigure already defined.
>                Or name \end... illegal, see p.192 of the manual.
> 
> See the LaTeX manual or LaTeX Companion for explanation.
> Type  H <return>  for immediate help.
>  ...
> 
> l.6 }
> 
> ?
> 
> 
> Tatsuro
> 
> 
> > ----- Original Message -----
> > 
>  
> > On Sunday, 2 January 2022 05:20:28 PST Tatsuro MATSUOKA wrote:
> > > Ethan
> > > Thank you for your reply.
> > > > 
> > > I attached the above patch, situation will be better but is not complete yet,
> > > I met the error below in both MikTeX on windows and TeXLive2021 on the cygwin64.
> > > 
> > > ****************************************************************************
> > > (gpinsetfigure.tex
> > > 
> > > ! LaTeX Error: Command \gpinsetfigure already defined.
> > >                Or name \end... illegal, see p.192 of the manual.
> > 
> > 
> > I apologize.  The patch I gave was incomplete.
> > It should also have changed the previous two lines in the Makefile.
> > Here is a more complete patch:
> > 
> > 	Ethan
> > 
> > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> > index 3c578b27e..cc0adcce5 100644
> > --- a/config/mingw/Makefile
> > +++ b/config/mingw/Makefile
> > @@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
> >  
> >  gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
> >  	cp gnuplot-figures.tex gp_tex2.tex
> > -	echo "\usepackage{graphicx}" > pdffigures.tex
> > -	echo "\usepackage{picins}" >> pdffigures.tex
> > +	echo "\usepackage{graphicx}" > gpinsetfigures.tex
> > +	echo "\usepackage{picins}" >> gpinsetfigures.tex
> > +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> > +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> > +	echo "}" >> gpinsetfigure.tex
> >  	# Call LaTeX three times to get the toc right.
> >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > 
> > 
> > 
> > 
> 
> 

Re: inquiry make documentation on native windows

[Tatsuro M. <tma...@ya...>]

> ----- Original Message -----
> 
> From: "Ethan A Merritt" <me...@uw...>
> To: "beta" <gnu...@li...>; "Tatsuro MATSUOKA" <tma...@ya...>
> Date: 2022/01/03 月 09:04
> Subject: Re: inquiry make documentation on native windows
> 
> 
> On Sunday, 2 January 2022 14:36:59 PST Tatsuro MATSUOKA wrote:
> > Ethan
> > 
> > Thank you for your reply again
> > 
> > Unfortunately the below patch gives a different error.
> > On MikTeX
> > 
> > (f:\programs\MiKTeX\tex/latex/tools\longtable.sty)
> > 
> > LaTeX Warning: \include should only be used after \begin{document} on input lin
> > e 42.
> 
> I have never seen that error message.
> Perhaps this is a difference between MiKTeX and TexLive?
> You could try changing the word "include" to "input" on line 42 of titlepag.tex
> 
>    % This is only needed if you want to embed figures
> -  \include{gpinsetfigure}
> +  \input{gpinsetfigure}

The change makes the warining disappeared 
but even if  the change does not apply, results are the same.


 
> 
> > (gpinsetfigure.tex
> > 
> > ! LaTeX Error: Command \gpinsetfigure already defined.
> >                Or name \end... illegal, see p.192 of the manual.
> 
> This one makes no sense to me.
> Please check the content of gpinsetfigure.tex
> It should look like this:
> 
> [~/git/gnuplot-main/docs] cat gpinsetfigure.tex
> \usepackage{graphicx}
> \usepackage{picins}
> \newcommand{\gpinsetfigure}[1]{
>   \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}
> }
I found two type mistakes in your patch
Two "gpinsetfigures.tex" are found (not "gpinsetfigure.tex")

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
diff --git a/config/mingw/Makefile b/config/mingw/Makefile
index 3c578b27e..cc0adcce5 100644
--- a/config/mingw/Makefile
+++ b/config/mingw/Makefile
@@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
 
 gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
 	cp gnuplot-figures.tex gp_tex2.tex
-	echo "\usepackage{graphicx}" > pdffigures.tex
-	echo "\usepackage{picins}" >> pdffigures.tex
+	echo "\usepackage{graphicx}" > gpinsetfigures.tex  #  should be gpinsetfigure.tex
+	echo "\usepackage{picins}" >> gpinsetfigures.tex # should be gpinsetfigure.tex
+	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
+	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
+	echo "}" >> gpinsetfigure.tex
 	# Call LaTeX three times to get the toc right.
 	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
 	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

After type mistakes are corrected, "make docs "with both MiKTeX and TeXLive on cygwin on native windows build are successful.

Please push corrected patch to the master branch.

Tatsuro





> There should be no "\end" in the file, and the definition of
> gpinsetfigure should appear only once.
> 
> 	Ethan
> 
> > See the LaTeX manual or LaTeX Companion for explanation.
> > Type  H <return>  for immediate help.
> >  ...
> > 
> > l.6 }
> > 
> > ?
> > 
> > On TeXLive on cygwin
> > 
> > (/usr/share/texmf-dist/tex/latex/tools/longtable.sty)
> > \@input{gpinsetfigure.aux}
> > (./gpinsetfigure.tex
> > 
> > ! LaTeX Error: Command \gpinsetfigure already defined.
> >                Or name \end... illegal, see p.192 of the manual.
> > 
> > See the LaTeX manual or LaTeX Companion for explanation.
> > Type  H <return>  for immediate help.
> >  ...
> > 
> > l.6 }
> > 
> > ?
> > 
> > 
> > Tatsuro
> > 
> > 
> > > ----- Original Message -----
> > > 
> >  
> > > On Sunday, 2 January 2022 05:20:28 PST Tatsuro MATSUOKA wrote:
> > > > Ethan
> > > > Thank you for your reply.
> > > > > 
> > > > I attached the above patch, situation will be better but is not complete yet,
> > > > I met the error below in both MikTeX on windows and TeXLive2021 on the cygwin64.
> > > > 
> > > > ****************************************************************************
> > > > (gpinsetfigure.tex
> > > > 
> > > > ! LaTeX Error: Command \gpinsetfigure already defined.
> > > >                Or name \end... illegal, see p.192 of the manual.
> > > 
> > > 
> > > I apologize.  The patch I gave was incomplete.
> > > It should also have changed the previous two lines in the Makefile.
> > > Here is a more complete patch:
> > > 
> > > 	Ethan
> > > 
> > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > > diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> > > index 3c578b27e..cc0adcce5 100644
> > > --- a/config/mingw/Makefile
> > > +++ b/config/mingw/Makefile
> > > @@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
> > >  
> > >  gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
> > >  	cp gnuplot-figures.tex gp_tex2.tex
> > > -	echo "\usepackage{graphicx}" > pdffigures.tex
> > > -	echo "\usepackage{picins}" >> pdffigures.tex
> > > +	echo "\usepackage{graphicx}" > gpinsetfigures.tex
> > > +	echo "\usepackage{picins}" >> gpinsetfigures.tex
> > > +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> > > +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> > > +	echo "}" >> gpinsetfigure.tex
> > >  	# Call LaTeX three times to get the toc right.
> > >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> > >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > > 
> > > 
> > > 
> > > 
> > 
> > 
> 
> 
> 
> 

Re: inquiry make documentation on native windows

[Tatsuro M. <tma...@ya...>]

Ethan

Thank you for updating the config/mingw/Makefile in the master branch.
https://sourceforge.net/p/gnuplot/gnuplot-main/ci/b838ebe0e44a28561f9193f307f15f3301cf654e/

Now we can build document by MiKTeX or TeXLive on windows environments in current development branch.

Tatsuro


> > ----- Original Message -----
> > 
> > 
> > 
> > On Sunday, 2 January 2022 14:36:59 PST Tatsuro MATSUOKA wrote:
> > > Ethan
> > > 
> > > Thank you for your reply again
> > > 
> > > Unfortunately the below patch gives a different error.
> > > On MikTeX
> > > 
> > > (f:\programs\MiKTeX\tex/latex/tools\longtable.sty)
> > > 
> > > LaTeX Warning: \include should only be used after \begin{document} on input lin
> > > e 42.
> > 
> > I have never seen that error message.
> > Perhaps this is a difference between MiKTeX and TexLive?
> > You could try changing the word "include" to "input" on line 42 of titlepag.tex
> > 
> >    % This is only needed if you want to embed figures
> > -  \include{gpinsetfigure}
> > +  \input{gpinsetfigure}
> 
> The change makes the warining disappeared 
> but even if  the change does not apply, results are the same.
> 
> 
>  
> > 
> > > (gpinsetfigure.tex
> > > 
> > > ! LaTeX Error: Command \gpinsetfigure already defined.
> > >                Or name \end... illegal, see p.192 of the manual.
> > 
> > This one makes no sense to me.
> > Please check the content of gpinsetfigure.tex
> > It should look like this:
> > 
> > [~/git/gnuplot-main/docs] cat gpinsetfigure.tex
> > \usepackage{graphicx}
> > \usepackage{picins}
> > \newcommand{\gpinsetfigure}[1]{
> >   \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}
> > }
> I found two type mistakes in your patch
> Two "gpinsetfigures.tex" are found (not "gpinsetfigure.tex")
> 
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> index 3c578b27e..cc0adcce5 100644
> --- a/config/mingw/Makefile
> +++ b/config/mingw/Makefile
> @@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
>  
>  gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
>  	cp gnuplot-figures.tex gp_tex2.tex
> -	echo "\usepackage{graphicx}" > pdffigures.tex
> -	echo "\usepackage{picins}" >> pdffigures.tex
> +	echo "\usepackage{graphicx}" > gpinsetfigures.tex  #  should be gpinsetfigure.tex
> +	echo "\usepackage{picins}" >> gpinsetfigures.tex # should be gpinsetfigure.tex
> +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> +	echo "}" >> gpinsetfigure.tex
>  	# Call LaTeX three times to get the toc right.
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
>  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> 
> After type mistakes are corrected, "make docs "with both MiKTeX and TeXLive on cygwin on native windows build are successful.
> 
> Please push corrected patch to the master branch.
> 
> Tatsuro
> 
> 
> 
> 
> 
> > There should be no "\end" in the file, and the definition of
> > gpinsetfigure should appear only once.
> > 
> > 	Ethan
> > 
> > > See the LaTeX manual or LaTeX Companion for explanation.
> > > Type  H <return>  for immediate help.
> > >  ...
> > > 
> > > l.6 }
> > > 
> > > ?
> > > 
> > > On TeXLive on cygwin
> > > 
> > > (/usr/share/texmf-dist/tex/latex/tools/longtable.sty)
> > > \@input{gpinsetfigure.aux}
> > > (./gpinsetfigure.tex
> > > 
> > > ! LaTeX Error: Command \gpinsetfigure already defined.
> > >                Or name \end... illegal, see p.192 of the manual.
> > > 
> > > See the LaTeX manual or LaTeX Companion for explanation.
> > > Type  H <return>  for immediate help.
> > >  ...
> > > 
> > > l.6 }
> > > 
> > > ?
> > > 
> > > 
> > > Tatsuro
> > > 
> > > 
> > > > ----- Original Message -----
> > > > 
> > >  
> > > > On Sunday, 2 January 2022 05:20:28 PST Tatsuro MATSUOKA wrote:
> > > > > Ethan
> > > > > Thank you for your reply.
> > > > > > 
> > > > > I attached the above patch, situation will be better but is not complete yet,
> > > > > I met the error below in both MikTeX on windows and TeXLive2021 on the cygwin64.
> > > > > 
> > > > > ****************************************************************************
> > > > > (gpinsetfigure.tex
> > > > > 
> > > > > ! LaTeX Error: Command \gpinsetfigure already defined.
> > > > >                Or name \end... illegal, see p.192 of the manual.
> > > > 
> > > > 
> > > > I apologize.  The patch I gave was incomplete.
> > > > It should also have changed the previous two lines in the Makefile.
> > > > Here is a more complete patch:
> > > > 
> > > > 	Ethan
> > > > 
> > > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > > > diff --git a/config/mingw/Makefile b/config/mingw/Makefile
> > > > index 3c578b27e..cc0adcce5 100644
> > > > --- a/config/mingw/Makefile
> > > > +++ b/config/mingw/Makefile
> > > > @@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
> > > >  
> > > >  gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
> > > >  	cp gnuplot-figures.tex gp_tex2.tex
> > > > -	echo "\usepackage{graphicx}" > pdffigures.tex
> > > > -	echo "\usepackage{picins}" >> pdffigures.tex
> > > > +	echo "\usepackage{graphicx}" > gpinsetfigures.tex
> > > > +	echo "\usepackage{picins}" >> gpinsetfigures.tex
> > > > +	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
> > > > +	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
> > > > +	echo "}" >> gpinsetfigure.tex
> > > >  	# Call LaTeX three times to get the toc right.
> > > >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> > > >  	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
> > > > %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
> > > > 
> > > > 
> > > > 
> > > > 
> > > 
> > > 
> > 
> > 
> > 
> > 
> 
> 
> 
> _______________________________________________
> gnuplot-beta mailing list
> gnu...@li...
> Membership management via: https://lists.sourceforge.net/lists/listinfo/gnuplot-beta
> 

Re: inquiry make documentation on native windows

[Ethan A M. <me...@uw...>]

On Sunday, 2 January 2022 05:20:28 PST Tatsuro MATSUOKA wrote:
> Ethan
> Thank you for your reply.
> > 
> I attached the above patch, situation will be better but is not complete yet,
> I met the error below in both MikTeX on windows and TeXLive2021 on the cygwin64.
> 
> ****************************************************************************
> (gpinsetfigure.tex
> 
> ! LaTeX Error: Command \gpinsetfigure already defined.
>                Or name \end... illegal, see p.192 of the manual.


I apologize.  The patch I gave was incomplete.
It should also have changed the previous two lines in the Makefile.
Here is a more complete patch:

	Ethan

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
diff --git a/config/mingw/Makefile b/config/mingw/Makefile
index 3c578b27e..cc0adcce5 100644
--- a/config/mingw/Makefile
+++ b/config/mingw/Makefile
@@ -953,8 +953,11 @@ gnuplot.ps: gnuplot.dvi
 
 gnuplot.pdf: gnuplot-figures.tex $(TOP)/VERSION $(D)toc_entr.sty $(D)titlepag.tex
 	cp gnuplot-figures.tex gp_tex2.tex
-	echo "\usepackage{graphicx}" > pdffigures.tex
-	echo "\usepackage{picins}" >> pdffigures.tex
+	echo "\usepackage{graphicx}" > gpinsetfigures.tex
+	echo "\usepackage{picins}" >> gpinsetfigures.tex
+	echo "\newcommand{\gpinsetfigure}[1]{" >> gpinsetfigure.tex ; \
+	echo "  \parpic[r][rt]{\includegraphics[width=3in,keepaspectratio]{#1}}" >> gpinsetfigure.tex ; \
+	echo "}" >> gpinsetfigure.tex
 	# Call LaTeX three times to get the toc right.
 	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
 	TEXINPUTS=.:$(TOP):$(D):${TEXINPUTS}: pdflatex gp_tex2.tex
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%