Re: [GLE-general] error when using format "sci 2 10"

[Radek M. <rad...@gm...>]

So does this mean you only get this error when using QGLE (not direct gle 
running in terminal)?

I also had some complains about inittext.ini in the past. Usually, I just copy 
it to the gle's root directory and it is fine. I am not using QGLE though.
Nowadays, I am getting "/usr/lib/libtiff.so.5: no version information 
available", did not have a time to look at it yet.

R.


On čtvrtek 28. srpna 2025 10:55:29, středoevropský letní čas Lukas Flierl 
wrote:
> Hi Radek,
> 
> Yes you are right (as always) in my MWE I am using a different number of
> digits, but as mentioned this is not the cause. I am using Version 4.3.4,
> the issue might be that whenever I open an GLE  file (I am using QGLE) I
> get this error: "Could not open inittex.ini file ", I just press
> "Reloade file" and everything works fine.
> 
> Cheers
> Lukas
> 
> Am Do., 28. Aug. 2025 um 10:51 Uhr schrieb Radek Machulka <
> 
> rad...@gm...>:
> > No error on my side, however as I realize, I am using rather old version
> > of
> > GLE (v.4.3.4). What version do you use? If there is some regression, is
> > should
> > be relatively easy to find.
> > 
> > Just for record, you claim to have an issue with "sci 2 10", however your
> > code
> > snippet  uses "sci 3 10". Tried both, both works (that is probably what
> > you
> > meant, by number of digits does not matter).
> > 
> > Radek
> > 
> > 
> > On čtvrtek 28. srpna 2025 10:36:34, středoevropský letní čas Lukas Flierl
> > 
> > wrote:
> > > Dear all,
> > > 
> > > I am preparing some figures and when using format "sci 2 10" an error
> > > occurs. the number of digits does not seem to b the issue I also tried
> > 
> > "sci
> > 
> > > 4 10". Here is my GLE code:
> > > 
> > > size 12.0 12.0
> > > 
> > > begin graph
> > > xaxis min 1 max 100
> > > ! does not work
> > > yaxis min -1e-6 max 3e-3 format "sci 3 10"
> > > ! does work
> > > !yaxis min -1e-6 max 3e-3 format "sci 10"
> > > ! error message. Unrecognised control sequence {cdot}
> > > end graph
> > > 
> > > Any idea what is causing this?
> > > 
> > > Cheers
> > > Lukas_______________________________________________
> > 
> > Glx-general mailing list
> > Glx...@li...
> > https://lists.sourceforge.net/lists/listinfo/glx-general