From: Albert H. <he...@us...> - 2009-12-09 18:40:18
|
Update of /cvsroot/gc-linux/linux/drivers/net In directory sfp-cvsdas-2.v30.ch3.sourceforge.com:/tmp/cvs-serv21229/drivers/net Modified Files: Kconfig Makefile Log Message: Forward to v2.6.32. Index: Makefile =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/net/Makefile,v retrieving revision 1.39 retrieving revision 1.40 diff -C2 -d -r1.39 -r1.40 *** Makefile 9 Dec 2009 18:18:07 -0000 1.39 --- Makefile 9 Dec 2009 18:40:10 -0000 1.40 *************** *** 3,6 **** --- 3,10 ---- # + obj-$(CONFIG_MII) += mii.o + obj-$(CONFIG_MDIO) += mdio.o + obj-$(CONFIG_PHYLIB) += phy/ + obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o *************** *** 27,30 **** --- 31,35 ---- obj-$(CONFIG_JME) += jme.o obj-$(CONFIG_BE2NET) += benet/ + obj-$(CONFIG_VMXNET3) += vmxnet3/ gianfar_driver-objs := gianfar.o \ *************** *** 90,93 **** --- 95,99 ---- obj-$(CONFIG_KS8842) += ks8842.o obj-$(CONFIG_KS8851) += ks8851.o + obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o obj-$(CONFIG_VIA_RHINE) += via-rhine.o obj-$(CONFIG_VIA_VELOCITY) += via-velocity.o *************** *** 95,98 **** --- 101,105 ---- obj-$(CONFIG_RIONET) += rionet.o obj-$(CONFIG_SH_ETH) += sh_eth.o + obj-$(CONFIG_STMMAC_ETH) += stmmac/ # *************** *** 100,107 **** # - obj-$(CONFIG_MII) += mii.o - obj-$(CONFIG_MDIO) += mdio.o - obj-$(CONFIG_PHYLIB) += phy/ - obj-$(CONFIG_SUNDANCE) += sundance.o obj-$(CONFIG_HAMACHI) += hamachi.o --- 107,110 ---- *************** *** 138,141 **** --- 141,145 ---- obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o obj-$(CONFIG_AX88796) += ax88796.o + obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o *************** *** 143,146 **** --- 147,151 ---- ll_temac-objs := ll_temac_main.o ll_temac_mdio.o obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o + obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o obj-$(CONFIG_QLA3XXX) += qla3xxx.o obj-$(CONFIG_QLGE) += qlge/ Index: Kconfig =================================================================== RCS file: /cvsroot/gc-linux/linux/drivers/net/Kconfig,v retrieving revision 1.45 retrieving revision 1.46 diff -C2 -d -r1.45 -r1.46 *** Kconfig 9 Dec 2009 18:18:07 -0000 1.45 --- Kconfig 9 Dec 2009 18:40:10 -0000 1.46 *************** *** 210,214 **** config MACB tristate "Atmel MACB support" ! depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91CAP9 select PHYLIB help --- 210,214 ---- config MACB tristate "Atmel MACB support" ! depends on AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 select PHYLIB help *************** *** 976,980 **** config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" ! depends on NET_ETHERNET && HAS_IOMEM select MII select PHYLIB --- 976,980 ---- config ETHOC tristate "OpenCores 10/100 Mbps Ethernet MAC support" ! depends on NET_ETHERNET && HAS_IOMEM && HAS_DMA select MII select PHYLIB *************** *** 1739,1742 **** --- 1739,1750 ---- SPI driver for Micrel KS8851 SPI attached network chip. + config KS8851_MLL + tristate "Micrel KS8851 MLL" + depends on HAS_IOMEM + select MII + help + This platform driver is for Micrel KS8851 Address/data bus + multiplexed network chip. + config VIA_RHINE tristate "VIA Rhine support" *************** *** 1777,1781 **** config CPMAC tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" ! depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN select PHYLIB help --- 1785,1789 ---- config CPMAC tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)" ! depends on NET_ETHERNET && EXPERIMENTAL && AR7 select PHYLIB help *************** *** 1876,1880 **** config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" ! depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 help Say Y here if you want to use the built-in 10/100 Fast ethernet --- 1884,1888 ---- config FEC bool "FEC ethernet controller (of ColdFire and some i.MX CPUs)" ! depends on M523x || M527x || M5272 || M528x || M520x || M532x || MACH_MX27 || ARCH_MX35 || ARCH_MX25 help Say Y here if you want to use the built-in 10/100 Fast ethernet *************** *** 1929,1932 **** --- 1937,1955 ---- will be called atl2. + config XILINX_EMACLITE + tristate "Xilinx 10/100 Ethernet Lite support" + depends on PPC32 || MICROBLAZE + help + This driver supports the 10/100 Ethernet Lite from Xilinx. + + config BCM63XX_ENET + tristate "Broadcom 63xx internal mac support" + depends on BCM63XX + select MII + select PHYLIB + help + This driver supports the ethernet MACs in the Broadcom 63xx + MIPS chipset family (BCM63XX). + source "drivers/net/fs_enet/Kconfig" *************** *** 2370,2377 **** which is available on some Freescale SOCs. - config UGETH_MAGIC_PACKET - bool "Magic Packet detection support" - depends on UCC_GETH - config UGETH_TX_ON_DEMAND bool "Transmit on Demand support" --- 2393,2396 ---- *************** *** 2465,2468 **** --- 2484,2489 ---- will be called s6gmac. + source "drivers/net/stmmac/Kconfig" + endif # NETDEV_1000 *************** *** 2725,2728 **** --- 2746,2750 ---- select ZLIB_INFLATE select LIBCRC32C + select MDIO help This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards. *************** *** 3212,3214 **** --- 3234,3244 ---- lguest or QEMU based VMMs (like KVM or Xen). Say Y or M. + config VMXNET3 + tristate "VMware VMXNET3 ethernet driver" + depends on PCI && X86 && INET + help + This driver supports VMware's vmxnet3 virtual ethernet NIC. + To compile this driver as a module, choose M here: the + module will be called vmxnet3. + endif # NETDEVICES |