gambas-user — mailing list for gambas users

Re: [Gambas-user] Format function changes date value

[Gianluigi <bag...@gm...>]

But Debug (Print) localizes!

However, with the dates I always get lost :-(

Regards
Gianluigi


2018-05-19 16:00 GMT+02:00 T Lee Davidson <t.l...@gm...>:

> CDate uses UTC and, without the time information in the string, it would
> store midnight. Format uses local time.
>
> So, anyone in a time zone behind UTC will get the previous day printed.
> Try this format string:
> zTestResult = Format(CDate(zTestDate), "mm/dd/yy hh:nn ddd")
>
> Does the difference in hours match your timezone offset?
>
>
> --
> Lee
>
>
> On 05/19/2018 09:08 AM, Gianluigi wrote:
> > I think it depends on your version of Gambas, I get the correct result
> with
> > the master:
> >
> >   Dim zTestDate As String
> >   Dim zTestResult As String
> >   zTestDate = "5/4/2018"
> >   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
> >   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
> >   '' Result: Main.Main.9: Test date: 5/4/2018 Formatted: 05/04/18 ven
> >
> > Regards
> > Gianluigi
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>

Re: [Gambas-user] Format function changes date value

[T L. D. <t.l...@gm...>]

CDate uses UTC and, without the time information in the string, it would store midnight. Format uses local time.

So, anyone in a time zone behind UTC will get the previous day printed. Try this format string:
zTestResult = Format(CDate(zTestDate), "mm/dd/yy hh:nn ddd")

Does the difference in hours match your timezone offset?


-- 
Lee


On 05/19/2018 09:08 AM, Gianluigi wrote:
> I think it depends on your version of Gambas, I get the correct result with
> the master:
> 
>   Dim zTestDate As String
>   Dim zTestResult As String
>   zTestDate = "5/4/2018"
>   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
>   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
>   '' Result: Main.Main.9: Test date: 5/4/2018 Formatted: 05/04/18 ven
> 
> Regards
> Gianluigi

Re: [Gambas-user] Format function changes date value

[Gianluigi <bag...@gm...>]

It also works with Gambas 3.11.2

'' Main.Main.9: Test date: 5/4/2018 00:00:00 Formatted: 05/04/18 ven

Regards
Gianluigi


2018-05-19 15:36 GMT+02:00 George <ga...@ge...>:

> Sorry, I should have added that I'm on version 3.11.2
>
> On Sat, May 19, 2018 at 9:27 AM, George <ga...@ge...> wrote:
>
> > I'm using the repository 'http://ppa.launchpad.net/
> > gambas-team/gambas3/ubuntu'
> >
> > Is there something that's more up-to-date?
> >
> > On Sat, May 19, 2018 at 9:08 AM, Gianluigi <bag...@gm...> wrote:
> >
> >> I think it depends on your version of Gambas, I get the correct result
> >> with
> >> the master:
> >>
> >>   Dim zTestDate As String
> >>   Dim zTestResult As String
> >>   zTestDate = "5/4/2018"
> >>   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
> >>   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
> >>   '' Result: Main.Main.9: Test date: 5/4/2018 Formatted: 05/04/18 ven
> >>
> >> Regards
> >> Gianluigi
> >>
> >> 2018-05-19 14:54 GMT+02:00 George <ga...@ge...>:
> >>
> >> > When using the Format function to format a date, the date gets offset
> >> by 1
> >> > day.  Here's an example:
> >> >
> >> >   Dim zTestDate As String
> >> >   Dim zTestResult As String
> >> >   zTestDate = "5/4/2018"
> >> >   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
> >> >   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
> >> >
> >> > Result: Test date: 5/4/2018 Formatted: 05/03/18 Thu
> >> >
> >> > This seems to have started since the last update was applied.
> >> > ------------------------------------------------------------
> >> > ------------------
> >> > Check out the vibrant tech community on one of the world's most
> >> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >> > _______________________________________________
> >> > Gambas-user mailing list
> >> > Gam...@li...
> >> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >> >
> >> ------------------------------------------------------------
> >> ------------------
> >> Check out the vibrant tech community on one of the world's most
> >> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> >> _______________________________________________
> >> Gambas-user mailing list
> >> Gam...@li...
> >> https://lists.sourceforge.net/lists/listinfo/gambas-user
> >>
> >
> >
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>

Re: [Gambas-user] Format function changes date value

[George <ga...@ge...>]

Sorry, I should have added that I'm on version 3.11.2

On Sat, May 19, 2018 at 9:27 AM, George <ga...@ge...> wrote:

> I'm using the repository 'http://ppa.launchpad.net/
> gambas-team/gambas3/ubuntu'
>
> Is there something that's more up-to-date?
>
> On Sat, May 19, 2018 at 9:08 AM, Gianluigi <bag...@gm...> wrote:
>
>> I think it depends on your version of Gambas, I get the correct result
>> with
>> the master:
>>
>>   Dim zTestDate As String
>>   Dim zTestResult As String
>>   zTestDate = "5/4/2018"
>>   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
>>   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
>>   '' Result: Main.Main.9: Test date: 5/4/2018 Formatted: 05/04/18 ven
>>
>> Regards
>> Gianluigi
>>
>> 2018-05-19 14:54 GMT+02:00 George <ga...@ge...>:
>>
>> > When using the Format function to format a date, the date gets offset
>> by 1
>> > day.  Here's an example:
>> >
>> >   Dim zTestDate As String
>> >   Dim zTestResult As String
>> >   zTestDate = "5/4/2018"
>> >   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
>> >   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
>> >
>> > Result: Test date: 5/4/2018 Formatted: 05/03/18 Thu
>> >
>> > This seems to have started since the last update was applied.
>> > ------------------------------------------------------------
>> > ------------------
>> > Check out the vibrant tech community on one of the world's most
>> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> > _______________________________________________
>> > Gambas-user mailing list
>> > Gam...@li...
>> > https://lists.sourceforge.net/lists/listinfo/gambas-user
>> >
>> ------------------------------------------------------------
>> ------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Gambas-user mailing list
>> Gam...@li...
>> https://lists.sourceforge.net/lists/listinfo/gambas-user
>>
>
>

Re: [Gambas-user] Format function changes date value

[George <ga...@ge...>]

I'm using the repository '
http://ppa.launchpad.net/gambas-team/gambas3/ubuntu'

Is there something that's more up-to-date?

On Sat, May 19, 2018 at 9:08 AM, Gianluigi <bag...@gm...> wrote:

> I think it depends on your version of Gambas, I get the correct result with
> the master:
>
>   Dim zTestDate As String
>   Dim zTestResult As String
>   zTestDate = "5/4/2018"
>   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
>   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
>   '' Result: Main.Main.9: Test date: 5/4/2018 Formatted: 05/04/18 ven
>
> Regards
> Gianluigi
>
> 2018-05-19 14:54 GMT+02:00 George <ga...@ge...>:
>
> > When using the Format function to format a date, the date gets offset by
> 1
> > day.  Here's an example:
> >
> >   Dim zTestDate As String
> >   Dim zTestResult As String
> >   zTestDate = "5/4/2018"
> >   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
> >   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
> >
> > Result: Test date: 5/4/2018 Formatted: 05/03/18 Thu
> >
> > This seems to have started since the last update was applied.
> > ------------------------------------------------------------
> > ------------------
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > _______________________________________________
> > Gambas-user mailing list
> > Gam...@li...
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>

Re: [Gambas-user] Format function changes date value

[Gianluigi <bag...@gm...>]

I think it depends on your version of Gambas, I get the correct result with
the master:

  Dim zTestDate As String
  Dim zTestResult As String
  zTestDate = "5/4/2018"
  zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
  Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
  '' Result: Main.Main.9: Test date: 5/4/2018 Formatted: 05/04/18 ven

Regards
Gianluigi

2018-05-19 14:54 GMT+02:00 George <ga...@ge...>:

> When using the Format function to format a date, the date gets offset by 1
> day.  Here's an example:
>
>   Dim zTestDate As String
>   Dim zTestResult As String
>   zTestDate = "5/4/2018"
>   zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
>   Debug "Test date: " & zTestDate & " Formatted: " & zTestResult
>
> Result: Test date: 5/4/2018 Formatted: 05/03/18 Thu
>
> This seems to have started since the last update was applied.
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>

[Gambas-user] Format function changes date value

[George <ga...@ge...>]

When using the Format function to format a date, the date gets offset by 1
day.  Here's an example:

  Dim zTestDate As String
  Dim zTestResult As String
  zTestDate = "5/4/2018"
  zTestResult = Format(CDate(zTestDate), "mm/dd/yy ddd")
  Debug "Test date: " & zTestDate & " Formatted: " & zTestResult

Result: Test date: 5/4/2018 Formatted: 05/03/18 Thu

This seems to have started since the last update was applied.

[Gambas-user] Tab size...

[sbungay <sb...@sm...>]

I have set the tab size to 1 space in both the 
Tools->Preferences->Editor->Default tab size and also in the 
Project->Properties->Options areas, yet when I highlight a block of code 
and press [Tab] to move the block to where I want it the editor always 
indents by 2 spaces for each press of the [Tab] key.

Gambas 3.10.0
Linux Mint 17.3 Cinnamon 64 Bit
-- 
Stephen A. Bungay, Prop.
Smarts On Site
Information Systems & Support Services
705.734.0597

Re: [Gambas-user] Reverting to earlier gambas version

[PICCORO M. L. <mck...@gm...>]

what method are you using for upgrade?

where from do you upgrade?

what proceduure was using for upgrade?

please test the connection with debbuger trace also!

Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com

2018-05-15 18:38 GMT-04:00 richard terry <rt...@in...>:

> Hi List,
>
> I updated one of my work computers today  and forgot to not un-check the
> gambas upgrade. The result was my medical software will no longer work due
> to a postgres connection error.
>
>
> I was running 3.9.2.
>
>
> Is there any way I can revert to an older version until I have the time to
> find out what has happened.
>
>
> Regards
>
>
> Richard
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>

Re: [Gambas-user] Reverting to earlier gambas version

[Sebastián K. <se...@gm...>]

I do not have a backup of the Stable PPA to share. If it is really
critical, I could figure out how to create a dedicated PPA for you with a
kind of LTS release, and build an older version or Gambas.

Let me know If it would help. I can work on it in a few hours and hopefully
have it ready today.

Regards.

On Tue, May 15, 2018, 19:45 Benoît Minisini <g4...@gm...> wrote:

> Le 16/05/2018 à 00:38, richard terry a écrit :
> > Hi List,
> >
> > I updated one of my work computers today  and forgot to not un-check the
> > gambas upgrade. The result was my medical software will no longer work
> > due to a postgres connection error.
> >
> >
> > I was running 3.9.2.
> >
> >
> > Is there any way I can revert to an older version until I have the time
> > to find out what has happened.
> >
> >
> > Regards
> >
> >
> > Richard
> >
> >
>
> Please post to the new mailing-list at http://lists.gambas-basic.org.
> This mailing-list is now deprecated.
>
> Thanks.
>
> --
> Benoît Minisini
>
>
> ------------------------------------------------------------------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>

Re: [Gambas-user] Reverting to earlier gambas version

[Benoît M. <g4...@gm...>]

Le 16/05/2018 à 00:38, richard terry a écrit :
> Hi List,
> 
> I updated one of my work computers today  and forgot to not un-check the 
> gambas upgrade. The result was my medical software will no longer work 
> due to a postgres connection error.
> 
> 
> I was running 3.9.2.
> 
> 
> Is there any way I can revert to an older version until I have the time 
> to find out what has happened.
> 
> 
> Regards
> 
> 
> Richard
> 
> 

Please post to the new mailing-list at http://lists.gambas-basic.org. 
This mailing-list is now deprecated.

Thanks.

-- 
Benoît Minisini

[Gambas-user] Reverting to earlier gambas version

[richard t. <rt...@in...>]

Hi List,

I updated one of my work computers today  and forgot to not un-check the 
gambas upgrade. The result was my medical software will no longer work 
due to a postgres connection error.


I was running 3.9.2.


Is there any way I can revert to an older version until I have the time 
to find out what has happened.


Regards


Richard

[Gambas-user] Different quantities of seconds from UNIX date...

[<vu...@ti...>]

  Hello,

I do not understand why these two lines do not return the
same result.

Public Sub Main()

 Print
CFloat(DateDiff(CDate("01/01/1970"), Now, gb.Second))

 Print
CFloat(Date.ToUnixTime(Now)) ' Obviously we have to activate "gb.util"
Component

 End

So that the two results are identical, I have to add 4
hours !

Public Sub Main()

 Print CFloat(DateDiff(CDate("01/01/1970
04:00:00"), Now, gb.Second)) ' Here I have to add 4 hours !

 Print
CFloat(Date.ToUnixTime(Now))

 End

regards
vuott

MY SYSTEM AND
GAMBAS:
[System]
Gambas=3.10.90 23e7dec
(master)
OperatingSystem=Linux
Kernel=4.15.0-13-generic
Architecture=x86_64
Distribution=Linux
Mint 18.3
Sylvia
Desktop=CINNAMON
Theme=Cleanlooks
Language=it_IT.UTF-8
Memory=3945M

[Libraries]
Cairo=libcairo.so.2.11400.6
DBus=libdbus-1.so.3.14.6
GStreamer=libgstreamer-0.10.so.0.30.0
GStreamer=libgstreamer-1.0.so.0.803.0
GTK+2=libgtk-x11-2.0.so.0.2400.30
GTK+3=libgtk-3.so.0.1800.9
OpenGL=libGL.so.1.2.0
Poppler=libpoppler.so.58.0.0
QT4=libQtCore.so.4.8.7
QT5=libQt5Core.so.5.5.1
SDL=libSDL-1.2.so.0.11.4
SQLite=libsqlite3.so.0.8.6

[Environment]
DBUS_SESSION_BUS_ADDRESS=unix:abstract=/tmp/dbus-wi1D3Cngt9,guid=b771a1b43385eb8996e385e65ac78fe9
DEFAULTS_PATH=/usr/share/gconf/cinnamon.default.path
DESKTOP_SESSION=cinnamon
DISPLAY=:0
GB_GUI=gb.qt4
GDMSESSION=cinnamon
GDM_LANG=it
GNOME_DESKTOP_SESSION_ID=this-is-deprecated
GTK_MODULES=gail:atk-bridge
GTK_OVERLAY_SCROLLING=1
HOME=
INSIDE_NEMO_PYTHON=
LANG=it_IT.UTF-8
LANGUAGE=it
LOGNAME=
MANDATORY_PATH=/usr/share/gconf/cinnamon.mandatory.path
PATH=/bin:/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/g
ames
PWD=
QT_ACCESSIBILITY=1
QT_LINUX_ACCESSIBILITY_ALWAYS_ON=1
QT_QPA_PLATFORMTHEME=qgnomeplatform
QT_STYLE_OVERRIDE=gtk
SESSION_MANAGER=local/:@/tmp/.ICE-unix/1171,unix/:/tmp/.ICE-unix/1171
SHELL=/bin/bash
SHLVL=0
SSH_AGENT_PID=1229
SSH_AUTH_SOCK=/run/user/1000/keyring/ssh
TZ=:/etc/localtime
USER=
XAUTHORITY=/.Xauthority
XDG_CONFIG_DIRS=/etc/xdg/xdg-cinnamon:/etc/xdg
XDG_CURRENT_DESKTOP=X-Cinnamon
XDG_DATA_DIRS=/usr/share/cinnamon:/usr/share/gnome:/.local/share/flatpak/exports/share:/var/lib/flatpak/exports/share:/usr/local/share:/usr/share
XDG_GREETER_DATA_DIR=/var/lib/lightdm-data/
XDG_RUNTIME_DIR=/run/user/1000
XDG_SEAT=seat0
XDG_SEAT_PATH=/org/freedesktop/DisplayManager/Seat0
XDG_SESSION_DESKTOP=cinnamon
XDG_SESSION_ID=c1
XDG_SESSION_PATH=/org/freedesktop/DisplayManager/Session0
XDG_SESSION_TYPE=x11
XDG_VTNR=7


[1]  


Con Mobile Open 6 GB hai 6 Giga, 600 minuti e 300 SMS per il tuo smartphone a 9€ al mese per sempre. Passa ora a Tiscali Mobile, il nostro mese è vero! http://tisca.li/Open6GB0318

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Петро A. <abb...@gm...>]

Hi,
why you name it as the best if it's the worst, it doesn't work correct.


2018-03-20 3:07 GMT+02:00 PICCORO McKAY Lenz <mck...@gm...>:

> Sonicwall its the best! i have only TZ type and some 2XXX models
>
> this happened due some rules may macht with the url of the wiki for that
> country, must ask why the packet inspector do that to the sonicwall
> administrators
>
> Lenz McKAY Gerardo (PICCORO)
> http://qgqlochekone.blogspot.com
>
> 2018-03-19 8:49 GMT-04:00 Benoît Minisini <g4...@gm...>:
>
> > Le 19/03/2018 à 13:45, Петро Abbat a écrit :
> >
> >> Hi Gianluigi,
> >> What about blocked wiki for Ukraine? Why?
> >> Thanks in advance.
> >> Petro
> >>
> >>
> > I don't know. The wiki is hosted by the company where I work. Maybe they
> > receive too many attacks from that country, maybe this is a rule embedded
> > in the Sonic Wall appliance.
> >
> > I will ask my colleagues.
> >
> > --
> > Benoît Minisini
> >
> > ------------------------------------------------------------
> > ------------------
> >
> > Check out the vibrant tech community on one of the world's most
> > engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> > _______________________________________________
> > Gambas-user mailing list
> > Gam...@li...
> > https://lists.sourceforge.net/lists/listinfo/gambas-user
> >
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



-- 
З найкращими побажаннями,
Петро Савчук
+38 (093) 566-41-00

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Петро A. <abb...@gm...>]

Wiki only

2018-03-19 15:29 GMT+02:00 Gianluigi <bag...@gm...>:

> 2018-03-19 13:49 GMT+01:00 Benoît Minisini <g4...@gm...>:
>
> > Le 19/03/2018 à 13:45, Петро Abbat a écrit :
> >
> >> Hi Gianluigi,
> >> What about blocked wiki for Ukraine? Why?
> >> Thanks in advance.
> >> Petro
> >>
> >>
> > I don't know. The wiki is hosted by the company where I work. Maybe they
> > receive too many attacks from that country, maybe this is a rule embedded
> > in the Sonic Wall appliance.
> >
> > I will ask my colleagues.
> >
> > --
> > Benoît Minisini
> >
>
> Hi Petro,
>
> the wiki or the new mailing list [0], or both?
>
> [0] https://lists.gambas-basic.org/listinfo/user
>
> Regards
> Gianluigi
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



-- 
З найкращими побажаннями,
Петро Савчук
+38 (093) 566-41-00

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[PICCORO M. L. <mck...@gm...>]

Sonicwall its the best! i have only TZ type and some 2XXX models

this happened due some rules may macht with the url of the wiki for that
country, must ask why the packet inspector do that to the sonicwall
administrators

Lenz McKAY Gerardo (PICCORO)
http://qgqlochekone.blogspot.com

2018-03-19 8:49 GMT-04:00 Benoît Minisini <g4...@gm...>:

> Le 19/03/2018 à 13:45, Петро Abbat a écrit :
>
>> Hi Gianluigi,
>> What about blocked wiki for Ukraine? Why?
>> Thanks in advance.
>> Petro
>>
>>
> I don't know. The wiki is hosted by the company where I work. Maybe they
> receive too many attacks from that country, maybe this is a rule embedded
> in the Sonic Wall appliance.
>
> I will ask my colleagues.
>
> --
> Benoît Minisini
>
> ------------------------------------------------------------
> ------------------
>
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Gianluigi <bag...@gm...>]

2018-03-19 13:49 GMT+01:00 Benoît Minisini <g4...@gm...>:

> Le 19/03/2018 à 13:45, Петро Abbat a écrit :
>
>> Hi Gianluigi,
>> What about blocked wiki for Ukraine? Why?
>> Thanks in advance.
>> Petro
>>
>>
> I don't know. The wiki is hosted by the company where I work. Maybe they
> receive too many attacks from that country, maybe this is a rule embedded
> in the Sonic Wall appliance.
>
> I will ask my colleagues.
>
> --
> Benoît Minisini
>

Hi Petro,

the wiki or the new mailing list [0], or both?

[0] https://lists.gambas-basic.org/listinfo/user

Regards
Gianluigi

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Benoît M. <g4...@gm...>]

Le 19/03/2018 à 13:45, Петро Abbat a écrit :
> Hi Gianluigi,
> What about blocked wiki for Ukraine? Why?
> Thanks in advance.
> Petro
> 

I don't know. The wiki is hosted by the company where I work. Maybe they 
receive too many attacks from that country, maybe this is a rule 
embedded in the Sonic Wall appliance.

I will ask my colleagues.

-- 
Benoît Minisini

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Петро A. <abb...@gm...>]

Hi Gianluigi,
What about blocked wiki for Ukraine? Why?
Thanks in advance.
Petro

2018-03-19 14:23 GMT+02:00 Gianluigi <bag...@gm...>:

> 2018-03-19 13:20 GMT+01:00 Tobias Boege <ta...@gm...>:
>
> > On Mon, 19 Mar 2018, fargodwe via Gambas-user wrote:
> > > I decided to try to see if I can learn gambas.  I am running Linux Mint
> > 18.2
> > > (Sarah).  I installed gambas 3.10 via the package manager.  When I
> > create a
> > > new project, the window on the left (project properties??) is displayed
> > and
> > > a blank form is displayed.  There are no tool boxes on the screen and
> no
> > > options under any of the icon or text menus to do so.  I have seen
> screen
> > > shots on the web where it looks like visual basic with a toolbox to
> chose
> > > items that go on the screen and also the toolbox that shows the
> > properties
> > > for them.  I cannot get this to come up at all.  I tried deleting
> > everything
> > > and followed the instructions for Ubuntu (Mint is based on Ubuntu) by
> > adding
> > > the repo, updating the package lists and installing gambas 3.10.  Same
> > thing
> > > happens.
> > >
> > > I assume there must be something I don't understand at all.  Maybe this
> > > doesn't come with the various tool boxes I was used to seeing in visual
> > > basic - I have no clue as I'm just starting out.
> > >
> > > If someone could tell this old guy what the heck he is doing wrong it
> > would
> > > be greatly appreciated!
> > >
> >
> > Important note: This list on sourceforge is no longer active. You have to
> > use the new one: https://lists.gambas-basic.org/listinfo/user. I'll
> answer
> > this question with the new list in CC.
> >
> > If you open your eyes really wide and hover with your cursor over the
> area
> > in the attached screenshot, you will see two arrows pop up (shown inside
> > the
> > red ellipse). Click on that control and the toolbox should become
> visible.
> > There are other panels which you can show/hide in this way.
> >
> > Regards,
> > Tobi
> >
> > --
> > "There's an old saying: Don't change anything... ever!" -- Mr. Monk
> >
>
>
> If the Gambas Help menu is visible and works, I suggest you add to the your
> e-mail the System information to see if you have installed all the
> libraries.
>
> Regards
> Gianluigi
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> Gambas-user mailing list
> Gam...@li...
> https://lists.sourceforge.net/lists/listinfo/gambas-user
>



-- 
З найкращими побажаннями,
Петро Савчук
+38 (093) 566-41-00

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Gianluigi <bag...@gm...>]

2018-03-19 13:20 GMT+01:00 Tobias Boege <ta...@gm...>:

> On Mon, 19 Mar 2018, fargodwe via Gambas-user wrote:
> > I decided to try to see if I can learn gambas.  I am running Linux Mint
> 18.2
> > (Sarah).  I installed gambas 3.10 via the package manager.  When I
> create a
> > new project, the window on the left (project properties??) is displayed
> and
> > a blank form is displayed.  There are no tool boxes on the screen and no
> > options under any of the icon or text menus to do so.  I have seen screen
> > shots on the web where it looks like visual basic with a toolbox to chose
> > items that go on the screen and also the toolbox that shows the
> properties
> > for them.  I cannot get this to come up at all.  I tried deleting
> everything
> > and followed the instructions for Ubuntu (Mint is based on Ubuntu) by
> adding
> > the repo, updating the package lists and installing gambas 3.10.  Same
> thing
> > happens.
> >
> > I assume there must be something I don't understand at all.  Maybe this
> > doesn't come with the various tool boxes I was used to seeing in visual
> > basic - I have no clue as I'm just starting out.
> >
> > If someone could tell this old guy what the heck he is doing wrong it
> would
> > be greatly appreciated!
> >
>
> Important note: This list on sourceforge is no longer active. You have to
> use the new one: https://lists.gambas-basic.org/listinfo/user. I'll answer
> this question with the new list in CC.
>
> If you open your eyes really wide and hover with your cursor over the area
> in the attached screenshot, you will see two arrows pop up (shown inside
> the
> red ellipse). Click on that control and the toolbox should become visible.
> There are other panels which you can show/hide in this way.
>
> Regards,
> Tobi
>
> --
> "There's an old saying: Don't change anything... ever!" -- Mr. Monk
>


If the Gambas Help menu is visible and works, I suggest you add to the your
e-mail the System information to see if you have installed all the
libraries.

Regards
Gianluigi

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Tobias B. <ta...@gm...>]

On Mon, 19 Mar 2018, fargodwe via Gambas-user wrote:
> I decided to try to see if I can learn gambas.  I am running Linux Mint 18.2
> (Sarah).  I installed gambas 3.10 via the package manager.  When I create a
> new project, the window on the left (project properties??) is displayed and
> a blank form is displayed.  There are no tool boxes on the screen and no
> options under any of the icon or text menus to do so.  I have seen screen
> shots on the web where it looks like visual basic with a toolbox to chose
> items that go on the screen and also the toolbox that shows the properties
> for them.  I cannot get this to come up at all.  I tried deleting everything
> and followed the instructions for Ubuntu (Mint is based on Ubuntu) by adding
> the repo, updating the package lists and installing gambas 3.10.  Same thing
> happens.
> 
> I assume there must be something I don't understand at all.  Maybe this
> doesn't come with the various tool boxes I was used to seeing in visual
> basic - I have no clue as I'm just starting out.
> 
> If someone could tell this old guy what the heck he is doing wrong it would
> be greatly appreciated!
> 

Important note: This list on sourceforge is no longer active. You have to
use the new one: https://lists.gambas-basic.org/listinfo/user. I'll answer
this question with the new list in CC.

If you open your eyes really wide and hover with your cursor over the area
in the attached screenshot, you will see two arrows pop up (shown inside the
red ellipse). Click on that control and the toolbox should become visible.
There are other panels which you can show/hide in this way.

Regards,
Tobi

-- 
"There's an old saying: Don't change anything... ever!" -- Mr. Monk

Re: [Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[Benoît M. <g4...@gm...>]

Le 19/03/2018 à 13:00, fargodwe via Gambas-user a écrit :
> I decided to try to see if I can learn gambas.  I am running Linux Mint 18.2
> (Sarah).  I installed gambas 3.10 via the package manager.  When I create a
> new project, the window on the left (project properties??) is displayed and
> a blank form is displayed.  There are no tool boxes on the screen and no
> options under any of the icon or text menus to do so.  I have seen screen
> shots on the web where it looks like visual basic with a toolbox to chose
> items that go on the screen and also the toolbox that shows the properties
> for them.  I cannot get this to come up at all.  I tried deleting everything
> and followed the instructions for Ubuntu (Mint is based on Ubuntu) by adding
> the repo, updating the package lists and installing gambas 3.10.  Same thing
> happens.
> 
> I assume there must be something I don't understand at all.  Maybe this
> doesn't come with the various tool boxes I was used to seeing in visual
> basic - I have no clue as I'm just starting out.
> 
> If someone could tell this old guy what the heck he is doing wrong it would
> be greatly appreciated!
> 

Please post to the new mailing-list at http://lists.gambas-basic.org. 
This mailing-list is now deprecated.

Thanks.

-- 
Benoît Minisini

[Gambas-user] Linux Mint 18.2, Gambas 3.10 installed from repos, no toolboxes on the screen

[fargodwe <gc...@ya...>]

I decided to try to see if I can learn gambas.  I am running Linux Mint 18.2
(Sarah).  I installed gambas 3.10 via the package manager.  When I create a
new project, the window on the left (project properties??) is displayed and
a blank form is displayed.  There are no tool boxes on the screen and no
options under any of the icon or text menus to do so.  I have seen screen
shots on the web where it looks like visual basic with a toolbox to chose
items that go on the screen and also the toolbox that shows the properties
for them.  I cannot get this to come up at all.  I tried deleting everything
and followed the instructions for Ubuntu (Mint is based on Ubuntu) by adding
the repo, updating the package lists and installing gambas 3.10.  Same thing
happens.

I assume there must be something I don't understand at all.  Maybe this
doesn't come with the various tool boxes I was used to seeing in visual
basic - I have no clue as I'm just starting out.

If someone could tell this old guy what the heck he is doing wrong it would
be greatly appreciated!



--
Sent from: http://gambas.8142.n7.nabble.com/gambas-user-f3.html

Re: [Gambas-user] IDE Git Magic ...

[Benoît M. <g4...@gm...>]

Le 08/02/2018 à 16:47, Christof Thalhofer a écrit :
> Hello,
> 
> I am playing around with the daily version 3.10.90 of Gambas from Launchpad.
> 
> As I have all my codebase in Git I see now, that the Gambas IDE does a
> lot of magic by itself. If I add a new module/class it automagically
> adds it to the staging area of the current Git project.
> 
> Sorry, but I do not like that! Never! I want to compose my commits in
> the staging area by myself and do not want to have to throw out things
> that the IDE added there only because of the fact that I have added a
> file ...
> 
> For me this is annoying and in my opinion it is also against the
> philosophy behind Git. Because: Git encourages the user to do
> fine-granular commits. For that the staging area exists, so that one can
> pick only those changes out of the working dir, which belong to the
> current commit.
> 
> In the current state the Gambas IDE is counteracting this.
> 
> Is there the possibility to switch that behaviour off generally (for all
> projects on my computer)? I need that badly.
> 
> But generally: In my opinion it should be off by default, because it
> leads to bad behaviour of not so skilled programmers.
> 
> 
> Alles Gute
> 
> Christof Thalhofer
> 
> 

I understand, but wrong mailing-list! :-)

-- 
Benoît Minisini

[Gambas-user] IDE Git Magic ...

[Christof T. <ch...@de...>]

Hello,

I am playing around with the daily version 3.10.90 of Gambas from Launchpad.

As I have all my codebase in Git I see now, that the Gambas IDE does a
lot of magic by itself. If I add a new module/class it automagically
adds it to the staging area of the current Git project.

Sorry, but I do not like that! Never! I want to compose my commits in
the staging area by myself and do not want to have to throw out things
that the IDE added there only because of the fact that I have added a
file ...

For me this is annoying and in my opinion it is also against the
philosophy behind Git. Because: Git encourages the user to do
fine-granular commits. For that the staging area exists, so that one can
pick only those changes out of the working dir, which belong to the
current commit.

In the current state the Gambas IDE is counteracting this.

Is there the possibility to switch that behaviour off generally (for all
projects on my computer)? I need that badly.

But generally: In my opinion it should be off by default, because it
leads to bad behaviour of not so skilled programmers.


Alles Gute

Christof Thalhofer

-- 
Dies ist keine Signatur