Menu
▾
▴
Re: [Fink-beginners] Error installing Terminator on macOS
|
From: Carl C. <car...@gm...> - 2020-03-21 00:12:47
|
I updated the command-line tools to 11.3.1. This alone did not fix the problem. The output was the same as before. The output of `xcrun --sdk macosx --show-sdk-path` is `/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk` Finally, I made the change to ` /sw/fink/dists/stable/main/finkinfo/languages/python27.info` and ran the build again. This time it lasted much longer and, judging by the fact that no errors were shown at the end, I think the build was successful. <http://python27.info/> It would have been nice to get a confirmation message along the lines of “Congratulations, the installation of Terminator was successful”, but maybe I’ve just been spoiled by whizz-bang graphical macOS installers! I then tried trying to run `terminator` from the command-line. I received the message: `/sw/lib/python2.7/site-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display warnings.warn(str(e), _gtk.Warning) You need to run terminator in an X environment. Make sure $DISPLAY is properly set` I think this indicates that terminator did, indeed, build successfully, and that the message is just a configuration issue, which, quite frankly can wait until tomorrow to be addressed! Thanks for your help, Hanspeter! Cheers, Carl On 20 March 2020 at 21:49:49, Hanspeter Niederstrasser ( fi...@sn...) wrote: On 3/19/20 3:04 PM, Carl Caulkett wrote: > MacOS 10.14.6 > > Package manager version: 0.45.0 > Distribution version: selfupdate-rsync Thu Mar 19 17:58:04 2020, 10.14.5, > x86_64 > Trees: local/main stable/main > Xcode.app: 11.3.1 > Xcode command-line tools: 10.3.0.0.1.1562985497 > Max. Fink build jobs: 8 > > I tried to install Terminator using the command `fink install terminator `. > After a lengthy process, an error message was returned. I haven’t posted > the full build report because there was literally pages and pages, although > I can if necessary. This is where the output seemed to start indicating > errors rather than warnings… > > gcc -L/sw/lib -bundle > /sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/libpython2.7.dylib > -L/sw/lib -L/sw/lib -fno-strict-aliasing -Wno-nullability-completeness > -DNDEBUG -g -fwrapv -fwrapv -O3 -Wall -Wstrict-prototypes -I. -IInclude > -I./Include -I/sw/include -I/sw/include/ncursesw > -I/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.15.sdk/usr/include > build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/_ctypes.o > build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/callbacks.o > build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/callproc.o > build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/stgdict.o > build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/cfield.o > build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/malloc_closure.o > build/temp.macosx-10.14-x86_64-2.7/sw/src/fink.build/python27-2.7.17-1/Python-2.7.17/Modules/_ctypes/darwin/dlfcn_simple.o > -L/sw/lib -L. -lffi -ldl -o build/lib.macosx-10.14-x86_64-2.7/_ctypes.so > > Python build finished, but the necessary bits to build these modules were > not found: > bsddb185 dl imageop > linuxaudiodev ossaudiodev spwd > sunaudiodev > To find the necessary bits, look in setup.py in detect_modules() for the > module's name. > (Fink package build should have 7 missing) > > > Failed to build these modules: > _scproxy readline > > make: *** [sharedmods] Error 1 > ### execution of /tmp/fink.NVmmA failed, exit code 2 > ### execution of /tmp/fink.UQP2k failed, exit code 2 > Removing runtime build-lock... > Removing build-lock package... > /sw/bin/dpkg-lockwait -r fink-buildlock-python27-2.7.17-1 > (Reading database ... 35311 files and directories currently installed.) > Removing fink-buildlock-python27-2.7.17-1 ... > Updating the list of locally available binary packages. > Scanning dists/stable/main/binary-darwin-x86_64 > New package: > dists/stable/main/binary-darwin-x86_64/graphics/imlib2-shlibs_1.5.1-1_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/graphics/imlib2_1.5.1-1_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/graphics/jasper-bin_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/graphics/jiv_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/graphics/libjasper.1-shlibs_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/graphics/libjasper.1_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/graphics/libjasper1-bin_1.900.1-debian1-2.4+deb8u6-1_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/text/docbook-bundle_4.1.2-1004_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/x11/freeglut2-shlibs_3.0.0-3_darwin-x86_64.deb > New package: > dists/stable/main/binary-darwin-x86_64/x11/freeglut2_3.0.0-3_darwin-x86_64.deb > Failed: phase compiling: python27-2.7.17-1 failed > > Before reporting any errors, please run "fink selfupdate" and try again. > Also try using "fink configure" to set your maximum build jobs to 1 and > attempt to build the package again. > If you continue to have issues, please check to see if the FAQ on Fink's > website solves the problem. If not, ask on one (not both, please) of > these mailing lists: > > The Fink Users List <fin...@li...> > The Fink Beginners List <fin...@li...>, > > with a carbon copy to the maintainer: > > Daniel Johnson <da...@da...> > > Note that this is preferable to emailing just the maintainer directly, > since most fink package maintainers do not have access to all possible > hardware and software configurations. > > Please try to include the complete error message in your report. This > generally consists of a compiler line starting with e.g. "gcc" or "g++" > followed by the actual error output from the compiler. > > Also include the following system information: > Package manager version: 0.45.0 > Distribution version: selfupdate-rsync Thu Mar 19 17:58:04 2020, 10.14.5, > x86_64 > Trees: local/main stable/main > Xcode.app: 11.3.1 > Xcode command-line tools: 10.3.0.0.1.1562985497 > Max. Fink build jobs: 8 1) You have a mismatch between Xcode.app and the command line tools. Do you still get this error after updating the command line tools to 11.3.1 ? 2) If you still get the error (the actual failure is with python27), there are reports that the problem is with the MacOSX10.14.sdk, but that was from a 10.15 user. https://github.com/fink/fink-distributions/issues/498#issuecomment-569372123 What's the output of `xcrun --sdk macosx --show-sdk-path` ? 3) Lastly, if you edit the file /sw/fink/dists/stable/main/finkinfo/languages/python27.info so that line #86 looks like this (lose the last -I flag): export CPPFLAGS="-I%p/include -I%p/include/ncursesw" Does that change fix the build? Hanspeter |
