From: Derek H. <de...@as...> - 2011-06-17 21:14:10
|
On 17.06.2011, at 2:16PM, Bruno Martin wrote: > I've tried to build python27-2.7.2-3 which fails to build on a PPC/G5 running 10.5. > The error is described below: > > Thanks for your help, > > Bruno > > > Python build finished, but the necessary bits to build these modules were not found: > bsddb185 linuxaudiodev ossaudiodev > spwd sunaudiodev > To find the necessary bits, look in setup.py in detect_modules() for the module's name. > (Fink package build should have 5 missing) > That's not an error - it was printed at the end of my build as well (would not even have noticed on my own), but installation succeeds just fine without these. I guess bsddb185 would be some wrapper for Berkeley DB (if you need one, you should be able to install bsddb3-py27 once your python build is fixed), the next are obviously audio devices for various OSs you'd neither want nor need, and no idea what spwd might be... > > Failed to build these modules: > _tkinter That's probably the show-stopper, but almost no information on the causes - are there no further messages below? I'd then look further up in the output for some error messages about failing to compile _tkinter.so or the like. I just built that package on the same system version; without further diagnostics I could only suggest to check your installation of tcltk and tcltk-dev, maybe rebuild those packages ('fink rebuild tcltk'). HTH, Derek |