From: Jihad_Joe <s_p...@ho...> - 2008-10-25 04:44:50
|
Hi everyone. Great program, using a mini-ITX computer as a router. I basically got sick of the products from Linksys and D-link. Specs: VIA C7 1.0Ghz, 512mb DDR2 533, Running on 1GB IDE flash drive (swap disabled) 3x gigabit Realtek 8110 (Green) one 10/100 VIA (Red) My problem is as follows; I have a server and a desktop running off two of the three gigabit ports, and all I need is ports 3784, 80, 123, 21 and 22 Open. In the "firewall" tab I select "port forwarding" and open aforementioned ports to the servers IP (192.168.1.109) For a test, I try the programs... Nothing. No connection at all from either Red or Green. Machines can still browse, but obviously the port did not open. I also tried setting the ports open on Inbound and outbound firewall with same result. The only fix I have now is to disable outbound firewall, and open ALL ports to my server. Not good. Any ideas? Thanks in advance Steve -- View this message in context: http://www.nabble.com/Port-forwarding-community-2.2RC3-tp20161311p20161311.html Sent from the efw-user mailing list archive at Nabble.com. |