Re: [E1000-devel] autoneg fiber e1000

[Nicolas P. <np...@1g...>]

> >
> >As you can see autoneg is forced on, and my link doesn't come up
> >because
> >of this.
> >The other side is a cisco with nonegociate .
> >
> >Setting speed and duplex, even with "advertise 0x020" doesn't work,
> >I have
> >to disable negociation.

> Have you tried 'ethtool -A ethx autoneg off'

Already tried ;) 

ethtool -A eth6 autoneg off 
autoneg unmodified, ignoring 
no pause parameters changed, aborting 

> -Tushar