[E1000-devel] [PATCH 07/12] e1000e: Use standard #defines for PCIe Capability ASPM fields

[Bjorn H. <bhe...@go...>]

Use the standard #defines for PCIe Capability ASPM fields.

Previously we used PCIE_LINK_STATE_L0S and PCIE_LINK_STATE_L1 directly, but
these are defined for the Linux ASPM interfaces, e.g.,
pci_disable_link_state(), and only coincidentally match the actual register
bits.  PCIE_LINK_STATE_CLKPM, also part of that interface, does not match
the register bit.

Signed-off-by: Bjorn Helgaas <bhe...@go...>
CC: Jeff Kirsher <jef...@in...>
CC: Jesse Brandeburg <jes...@in...>
CC: Bruce Allan <bru...@in...>
CC: Carolyn Wyborny <car...@in...>
CC: Don Skidmore <don...@in...>
CC: Greg Rose <gre...@in...>
CC: Peter P Waskiewicz Jr <pet...@in...>
CC: Alex Duyck <ale...@in...>
CC: John Ronciak <joh...@in...>
CC: e10...@li...
---
 drivers/net/ethernet/intel/e1000e/netdev.c |   11 +++++++++--
 1 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index f444eb0..b8561ef 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -5613,15 +5613,22 @@ static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 #else
 static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
 {
+	u16 aspm_ctl = 0;
+
+	if (state & PCIE_LINK_STATE_L0S)
+		aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L0S;
+	if (state & PCIE_LINK_STATE_L1)
+		aspm_ctl |= PCI_EXP_LNKCTL_ASPM_L1;
+
 	/*
 	 * Both device and parent should have the same ASPM setting.
 	 * Disable ASPM in downstream component first and then upstream.
 	 */
-	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, state);
+	pcie_capability_clear_word(pdev, PCI_EXP_LNKCTL, aspm_ctl);
 
 	if (pdev->bus->self)
 		pcie_capability_clear_word(pdev->bus->self, PCI_EXP_LNKCTL,
-					   state);
+					   aspm_ctl);
 }
 #endif
 static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)