Re: [E1000-devel] [Bugme-new] [Bug 10990] New: e1000/e1000e driver doesn't work with gigabit connection

[Kok, A. <auk...@in...>]

>> When plugged into a 10/100/1000 porting, forcing:
>> ethtool -s eth0 autoneg off speed 1000 duplex full

gigabit requires autonegotiation, and if you force speeds you would have to force
it on both ends anyway. The above configuration is therefore not a valid
configuration.

I suggest changing the autonegotiation mask, which leaves autoneg enabled:

	ethtool -s eth0 advertise 0x20

this is supported and should accomplish what you want.