From: Tantilov, E. S <emi...@in...> - 2008-04-25 15:54:33
|
Could you please provide some more information: lspci -vv dmesg (after initial boot and loading the driver) cat /proc/interrupts (after trying to pass some traffic) ethtool -e eth0 If you take a look at the README included with e1000 7.6.15.5 there is a section about an issue with 82573 that may be the cause for your problems. Check it out and try the fix (there is a script that you can run - the link is in the README). Thanks, Emil -----Original Message----- From: e10...@li... [mailto:e10...@li...] On Behalf Of Reeve Yang Sent: Thursday, April 24, 2008 8:03 PM To: e10...@li... Subject: [E1000-devel] none of driver from e1000-7.6.15.5 to e1000-7.6.9works for me My kernel version is 2.6.22.15, the chip set is 82573L Gigabit Ethernet Controller. The e1000 driver from kernel itself (I think it's 7.3.20 works) but it has performance issue. While I'm trying to upgrade to 7.6.15.5, the driver can be loaded (I compiled as a module), and shows in sysfs, etc. Everything looks fine. But I just cannot ping to outside or ping from outside, and got freezing randomly (I guess kernel crashed). I'll appreciate if anyone could shed some lights on it. I won't believe there is only me have this problem (if this is a problem). Or I have missed anything? Thanks. - Reeve ------------------------------------------------------------------------ - This SF.net email is sponsored by the 2008 JavaOne(SM) Conference Don't miss this year's exciting event. There's still time to save $100. Use priority code J8TL2D2. http://ad.doubleclick.net/clk;198757673;13503038;p?http://java.sun.com/j avaone _______________________________________________ E1000-devel mailing list E10...@li... https://lists.sourceforge.net/lists/listinfo/e1000-devel |