Extend rig data structures to indicate channel and sample rate requirements.

A software radio for AM and Digital Radio Mondiale (DRM)

Brought to you by: dflamand, j4ckh, jcable, kurpiers, and 4 others

#126 Extend rig data structures to indicate channel and sample rate requirements.

Milestone: 2.4

Status: open

Owner: nobody

Labels: None

Updated: 2019-05-06

Created: 2012-11-25

Creator: Julian Cable

Private: No

Some front ends provide the signal sampling hardware and have restricted or fixed sample rates and number of channels. For example could be 192 kHz I/Q or like the Winradio G313, mono I/F fixed at 48 kHz. Selecting the rig should configure the capture parameters appropriately.

Discussion

Julian Cable - 2013-05-11

Milestone: 2.1 --> 2.2
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Julian Cable - 2013-05-11

Moving this one to 2.2 as it looks like we have enough bugs fixed to warrant a release.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Julian Cable - 2013-10-21

Milestone: 2.1.1 --> 2.3
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Julian Cable - 2019-05-06

Milestone: 2.3 --> 2.4
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Extend rig data structures to indicate channel and sample rate requirements.

A software radio for AM and Digital Radio Mondiale (DRM)

Milestone

Searches

Help

#126 Extend rig data structures to indicate channel and sample rate requirements.

Discussion