devmon-support — General Devmon support

Re: [Devmon] Little problem with devmon

[Francesco D. <fdu...@q8...>]

Well it could be nice to do this: each polling period do:
1) a bb $bbdispay "ping" to check if hobbit is available, if not
available report it to a log file or if possible let the user configure
an alert script (mail/script execution)
2) do a bb $bbdisplay "query $hostname.conn" before polling each device
and if the result is not "green" send clear as status for each test of
that device (so they'll not become purple or start to alert everyone
because a router is down... It will also solve problem when a router
before your router is down because it will be the only one reporting the
error if you configured the routing)
3) if the hosts seems ok but when getting data via snmp you get an error
report yellow or better clear for the tests of that host and report
errors in the dm columns related to all problem encountered (invalid
password or whatever you get as errors instead of only reporting them in
the log file). This will prevent purple too..

With this we will not get devmon blocked or polling of devices that are
down/unreachable, will never get purple (really not nice to see and not
really needed because it could be the device that is down or a wrong
password) and some more information in the dm column to solve those
problems....

Those are just some suggestion I would like to see in the next version
:D=20

Thanks for the good job :D

Francesco


> -----Original Message-----
> From: dev...@li...=20
> [mailto:dev...@li...] On=20
> Behalf Of Schwimmer, Eric E *HS
> Sent: Tuesday, August 29, 2006 6:44 PM
> To: dev...@li...
> Subject: Re: [Devmon] Little problem with devmon
>=20
>=20
> This is most likely because the devmon daemon will throw a=20
> fatal error and quit if it is unable to reach the hobbit=20
> server (this was intended to prevent uncessary network/cpu=20
> traffic; polling a device doesn't help if you don't have a=20
> display server to report to).=20
>=20
> However, I myself have been bit by this in the past.  I'm=20
> thinking that I should change this to a warning, as opposed=20
> to a fatal error.
>=20
> Opinions?
>=20
> -Eric
>=20
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On=20
> Behalf Of Francesco Duranti
> Sent: Tuesday, August 29, 2006 5:56 AM
> To: dev...@li...
> Subject: [Devmon] Little problem with devmon
>=20
> I've a little problem with devmon.=20
> Sometimes it happen that when I stop the bb server for some=20
> time, when i restart it i get all devmon target in purple.=20
> I don't have any logs at the moment about this, I will try to=20
> get some but it seems that after I restart hobbit devmon will=20
> not restart to send data to him.
>=20
> If i restart the devmon deamon it will restart sending out data.
>=20
> --------------------------------------------------------------
> ----------
> -
> Using Tomcat but need to do more? Need to support web=20
> services, security?
> Get stuff done quickly with pre-integrated technology to make=20
> your job easier Download IBM WebSphere Application Server=20
> v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&
dat=3D121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>=20
> --------------------------------------------------------------
> -----------
> Using Tomcat but need to do more? Need to support web=20
> services, security?
> Get stuff done quickly with pre-integrated technology to make=20
> your job easier Download IBM WebSphere Application Server=20
> v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&
dat=3D121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>=20

Re: [Devmon] Little problem with devmon

[Schwimmer, E. E *H. <EE...@hs...>]

This is most likely because the devmon daemon will throw a fatal error
and quit if it is unable to reach the hobbit server (this was intended
to prevent uncessary network/cpu traffic; polling a device doesn't help
if you don't have a display server to report to).=20

However, I myself have been bit by this in the past.  I'm thinking that
I should change this to a warning, as opposed to a fatal error.

Opinions?

-Eric

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Francesco Duranti
Sent: Tuesday, August 29, 2006 5:56 AM
To: dev...@li...
Subject: [Devmon] Little problem with devmon

I've a little problem with devmon.=20
Sometimes it happen that when I stop the bb server for some time, when i
restart it i get all devmon target in purple.=20
I don't have any logs at the moment about this, I will try to get some
but it seems that after I restart hobbit devmon will not restart to send
data to him.

If i restart the devmon deamon it will restart sending out data.

------------------------------------------------------------------------
-
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

[Devmon] Little problem with devmon

[Francesco D. <fdu...@q8...>]

I've a little problem with devmon.=20
Sometimes it happen that when I stop the bb server for some time, when i
restart it i get all devmon target in purple.=20
I don't have any logs at the moment about this, I will try to get some
but it seems that after I restart hobbit devmon will not restart to send
data to him.

If i restart the devmon deamon it will restart sending out data.

Re: [Devmon] info on devmon project

[<Pet...@se...>]

Hi

I'm working on some templates and I will send them to the list.
I'm not a programmer so I just tell you the things that (in my opinion) 
could be improved:
- devmon doesn't look at the hobbit disabled status. it would be nice if 
it does.
- devmon doesn't look at the conn = red status so even if the host is 
unreacheable he is trying to do the snmpwalk.
- an option to specify the snmp version as a devmon tag (in the bb-hosts 
file)

Have you discussed with Henrik if he will patch the hobbit rrd collector?

I also do have 2 questions about templates:
- If I use the MATH function I always get two digits after the . (like 
36.00 degrees Celcius) How can I prevent this?
- Is it possible to sort the entry's of a table?

thanks again, Peter Jakobs




"Schwimmer, Eric E *HS" <EE...@hs...>
Sent by: dev...@li...

22-08-2006
22:15
Please respond to
dev...@li...


To
<dev...@li...>
cc

Subject
Re: [Devmon] info on devmon project







Hi Peter,

There's little activity because there is little to do on it :)  I
consider Devmon mostly 'finished' from my point of view, although if
there is anybody out there that wanted to submit patches or templates, I
would gladly merge them into the code. 

The hobbit rrd collector doesn't support capturing data from the devmon
output yet;  to get that to work you'll have to either patch the hobbit
rrd/la.c file to support the devmon output, or change the template text
to be bb-xsnmp-like.

Chances are that if the template isn't in the devmon release, nobody has
written a template for it yet (or at least decided not to share theres).
If you do end up writing a template, please post it to the devmon
mailing list and I will make sure to include it in the latest tarball.

Regards,
-Eric

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of Peter
Sent: Saturday, August 12, 2006 3:20 PM
To: dev...@li...
Subject: [Devmon] info on devmon project

Hi Eric,

Now that hobbit is in a stable fase (4.2) is released, I want to look
for an alternative for bb-xsnmp.
I took a look at devmon and it looks promising.
But I do see very little activity on the mailing list...
I also have the problem that (cisco) cpu is not graphed in hobbit.
There are still very little templates, when will new templates/devmon
versions released? How will be the upgrade procedure? I have a lot of
devices not templated in the latest release, I don't mind spending some
time on making them, but I don't want to reinvent the wheel....

Peter Jakobs


------------------------------------------------------------------------
-
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job 
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

[Devmon] Alarming On....

[Aiello, S. \(G. C. consultant\) <ste...@ge...>]

I am working a ports test for a cisco-ws6509. Basically I am listing all
the ports and their speed, RX info / TX info. a modified if_stat that
also checks for network errors. When a port on the switch shows errors,
I see at the top of the report, Alarmin on....  but instead of just
listing the primary aliases that have met a threshold, it is listing
every single one.  I.e.:
Interface error rates:
Alarming on
(sc0,sl0,1/1,1/2,15/1,4/1,4/2,4/3,4/4,4/5,4/6,4/7,4/8,4/9,4/10)
Alarming on (4/11,4/12,4/13,4/14,4/15,4/16,4/17,4/18,4/19,4/20)
Alarming on (4/21,4/22,4/23,4/24,4/25,4/26,4/27,4/28,4/29,4/30)
Alarming on (4/31,4/32,4/33,4/34,4/35,4/36,4/37,4/38,4/39,4/40)
Alarming on (4/41,4/42,4/43,4/44,4/45,4/46,4/47,4/48,5/1,5/2)
......

Not sure if I am doing anything wrong or if this is a bug, I am using
Devmon version 0.2.2.

Also, when performing mutiple threshold checks on a each entry of a
repeater. Is there a global .color variable for that line ?

[Devmon] new template

[Thomas <tlp...@ho...>]

Hi All,

I have just installed a couple of new routers cisco 7204VXR. However I 
guess its not compatible with the 7206 router for which I have a template.

On Power I have an error of the first power unit being removed even this 
is even installed.

On if_col, if_dsc and if_err I get blank status as there are undefined 
status on some seriel subinterfaces.

Would anybody have a valid template for this router model og explain me 
how I can copy/modify a template to fix the problem.

BR Thomas

Re: [Devmon] info on devmon project

[Schwimmer, E. E *H. <EE...@hs...>]

Hi Peter,

There's little activity because there is little to do on it :)  I
consider Devmon mostly 'finished' from my point of view, although if
there is anybody out there that wanted to submit patches or templates, I
would gladly merge them into the code. =20

The hobbit rrd collector doesn't support capturing data from the devmon
output yet;  to get that to work you'll have to either patch the hobbit
rrd/la.c file to support the devmon output, or change the template text
to be bb-xsnmp-like.

Chances are that if the template isn't in the devmon release, nobody has
written a template for it yet (or at least decided not to share theres).
If you do end up writing a template, please post it to the devmon
mailing list and I will make sure to include it in the latest tarball.

Regards,
-Eric

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of Peter
Sent: Saturday, August 12, 2006 3:20 PM
To: dev...@li...
Subject: [Devmon] info on devmon project

Hi Eric,

Now that hobbit is in a stable fase (4.2) is released, I want to look
for an alternative for bb-xsnmp.
I took a look at devmon and it looks promising.
But I do see very little activity on the mailing list...
I also have the problem that (cisco) cpu is not graphed in hobbit.
There are still very little templates, when will new templates/devmon
versions released? How will be the upgrade procedure? I have a lot of
devices not templated in the latest release, I don't mind spending some
time on making them, but I don't want to reinvent the wheel....

Peter Jakobs


------------------------------------------------------------------------
-
Using Tomcat but need to do more? Need to support web services,
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

[Devmon] info on devmon project

[Peter <pet...@my...>]

Hi Eric,

Now that hobbit is in a stable fase (4.2) is released, I want to look for a=
n alternative for bb-xsnmp.
I took a look at devmon and it looks promising.
But I do see very little activity on the mailing list...
I also have the problem that (cisco) cpu is not graphed in hobbit.
There are still very little templates, when will new templates/devmon versi=
ons released? How will be the upgrade procedure? I have a lot of devices =
not templated in the latest release, I don't mind spending some time on m=
aking them, but I don't want to reinvent the wheel....

Peter Jakobs

[Devmon] hobbit not graphing cpu use

[<bi...@to...>]

Hi,

I am having trouble getting devmon to produce cpu utilzation graphs with
hobbit.  Hobbit is graphing tcp connctions but no la.rrd file is being
written.  Any idea's what I might try to debug this?

Thank you,

Bill

[Devmon] PIX

[Gbenga D. <gbe...@gm...>]

Hi Guys,

Has anyone setup Devmon to monitor Cisco PIX firewall?

I am having issues doing this eventhough my other Cisco devices are very
much OK & polling.

Will appreciate if anyone can help me out.

Thanks

-- 
Gmail Is It

[Devmon] Message Problem

[Chris M. <chr...@cr...>]

I'm having a problem when trying to get an OID value displayed in a 
template.

I added the following line to the 'oids' in my template...

devHostname      : .1.3.6.1.2.1.1.5.0            : leaf

In my 'messages', I have...

Interface error rates:

TABLE:
Interface|Speed|Rate in (load %)|Rate out (load %)|Load Trend
{ifName}{ifAliasBox}|{ifSpeed}|{ifInLoad.color}{ifInSpeed} 
({ifInLoad}%){ifInLoad.errors}|{ifOutLoad.color}{ifOutSpeed} 
({ifOutLoad}%){ifOutLoad.errors}|<a href="/mrtg/?={devHostname}">Load</a>

But once I save the changes to 'messages', the devmon[master] process 
tanks, and devmon stops polling.  The only solution is for me to remove 
<a href="/mrtg/?={devHostname}">Load</a> from my messages file.

Is there a problem adding a leaf value OID to a table?

Re: [Devmon] Test of cluster functionality on NetApp

[Johann E. <Joh...@te...>]

Hi,

attached you will find the template for the NetApp cluster...

Johann

________________________________________
From: dev...@li... =
[mailto:dev...@li...] On Behalf Of Dean =
Casey
Sent: Dienstag, 4. Juli 2006 04:12
To: dev...@li...
Subject: Re: [Devmon] Test of cluster functionality on NetApp

I'd be interested in seeing this if you don't mind...

Dean Casey
P A T H F I R E
Email:=A0=A0 dc...@pa...
Office:=A0=A0 678 566 5664=20
________________________________________
From: dev...@li... =
[mailto:dev...@li...] On Behalf Of =
Johann Eggers
Sent: Monday, July 03, 2006 8:57 AM
To: dev...@li...
Subject: [Devmon] Test of cluster functionality on NetApp

Hi,
=A0
Since we are using clustered NetApp boxes here I created a template for =
testing the cluster functionality on a NetApp box.
=A0
The output looks like:
=A0
Mon Jul 3 14:52:10 2006
=A0
 Partner netapp04=A0 : ok
 Cluster Takeover=A0 : enabled
 Status=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0 : can Takeover
 Interconnect=A0=A0=A0=A0=A0 : up
 Takeover possible : ok
=A0
If somebody is interested I'm willing to share this template...
=A0
Regards
Johann
=A0

Re: [Devmon] test

[Whilding, C. <Cra...@me...>]

I got your message but it is indeed the 1st in a few weeks.

=20

Craig Whilding

=20

________________________________

From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Johann Eggers
Sent: 03 July 2006 13:31
To: dev...@li...
Subject: [Devmon] test

=20

Is the list dead??

=20

Nothing heard since a couple of weeks.

=20

Johann

[Devmon] test

[Johann E. <Joh...@te...>]

Is the list dead??

=20

Nothing heard since a couple of weeks.

=20

Johann

Re: [Devmon] Monitoring Insight Manager

[Schwimmer, E. E *H. <EE...@hs...>]

Hrm.  I'll take a look at this.

-Eric=20

> -----Original Message-----
> From: dev...@li...=20
> [mailto:dev...@li...] On=20
> Behalf Of Aiello, Steve (GE, Corporate, consultant)
> Sent: Tuesday, June 13, 2006 4:41 PM
> To: dev...@li...
> Subject: [Devmon] Monitoring Insight Manager
>=20
> Hello All,
> =20
> I have come across an interesting issue. I have written a=20
> template to monitor the Insight Management that run on=20
> Compaq/HP servers. I have 3 tests in total; cim, array, &=20
> iml. The iml test is what is causing the issue. IML=20
> (Integrate Management Log) is a log of hardware events. If=20
> the IML is empty, and I walk the OID I will see:
> =20
> .1.3.6.1.4.1.232.6.2.11.3.1.1
> SNMPv2-SMI::enterprises.232.6.2.11.3.1.1 =3D No Such Instance=20
> currently exists at this OID
>=20
> Which makes sense since the log is empty. But when devmon=20
> queiries the device, all my Insight Manager tests (cim,=20
> array, iml ) have issues. Below is a snippet of my devmon.log
> =20
> [06-06-13@16:27:01] No SNMP data found for cpqTempCelc on=20
> Server.Domain.com
> [06-06-13@16:27:01] No SNMP data found for cpqMemSpeed on=20
> Server.Domain.com
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqFanTypeText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqTempLocText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqPwrStatText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqFanLocText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqPwrRedunText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqPwrHotPlugText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqFanPresentText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqPwrPresentText
> [06-06-13@16:27:01] Missing repeater data for trans_switch on=20
> cpqCPUStatusText
> [06-06-13@16:27:01] Missing repeater data for cpqMemBoardIndx=20
> for cim msg
> [06-06-13@16:27:01] Missing repeater data for cpqTempCond for cim msg
> [06-06-13@16:27:01] Primary OID cpqTempActionText in cim=20
> table is a non-repeater
> [06-06-13@16:27:01] Missing repeater data for cpqFanCond for cim msg
> [06-06-13@16:27:01] No SNMP data found for=20
> cpqLogEntrySeverity on Server.Domain.com
> [06-06-13@16:27:01] No SNMP data found for cpqLogEntryNumber=20
> on Server.Domain.com
> [06-06-13@16:27:01] No SNMP data found for cpqLogEntryCount=20
> on Server.Domain.com
> =20
> I am guessing that the somehow the status of "No SNMP data=20
> found" is not being reset and thus casuing the other test=20
> snmp query test to fail ?
> =20
> I guess I also need to ask for a feature request for a flag=20
> to pass for a particular OID that being empty is ok...
> =20
> Thank you,
>   Steven
>=20

[Devmon] Monitoring Insight Manager

[Aiello, S. \(G. C. consultant\) <ste...@ge...>]

Hello All,
=20
I have come across an interesting issue. I have written a template to
monitor the Insight Management that run on Compaq/HP servers. I have 3
tests in total; cim, array, & iml. The iml test is what is causing the
issue. IML (Integrate Management Log) is a log of hardware events. If
the IML is empty, and I walk the OID I will see:
=20
.1.3.6.1.4.1.232.6.2.11.3.1.1
SNMPv2-SMI::enterprises.232.6.2.11.3.1.1 =3D No Such Instance currently
exists at this OID

Which makes sense since the log is empty. But when devmon queiries the
device, all my Insight Manager tests (cim, array, iml ) have issues.
Below is a snippet of my devmon.log
=20
[06-06-13@16:27:01] No SNMP data found for cpqTempCelc on
Server.Domain.com
[06-06-13@16:27:01] No SNMP data found for cpqMemSpeed on
Server.Domain.com
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqFanTypeText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqTempLocText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqPwrStatText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqFanLocText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqPwrRedunText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqPwrHotPlugText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqFanPresentText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqPwrPresentText
[06-06-13@16:27:01] Missing repeater data for trans_switch on
cpqCPUStatusText
[06-06-13@16:27:01] Missing repeater data for cpqMemBoardIndx for cim
msg
[06-06-13@16:27:01] Missing repeater data for cpqTempCond for cim msg
[06-06-13@16:27:01] Primary OID cpqTempActionText in cim table is a
non-repeater
[06-06-13@16:27:01] Missing repeater data for cpqFanCond for cim msg
[06-06-13@16:27:01] No SNMP data found for cpqLogEntrySeverity on
Server.Domain.com
[06-06-13@16:27:01] No SNMP data found for cpqLogEntryNumber on
Server.Domain.com
[06-06-13@16:27:01] No SNMP data found for cpqLogEntryCount on
Server.Domain.com
=20
I am guessing that the somehow the status of "No SNMP data found" is not
being reset and thus casuing the other test snmp query test to fail ?
=20
I guess I also need to ask for a feature request for a flag to pass for
a particular OID that being empty is ok...
=20
Thank you,
  Steven

Re: [Devmon] NetApp & DevMon 0.2

[Peter W. <pet...@gm...>]

Hi Craig,

Thanks for your response. I adapted my bb-hosts to only perform check
that can be performed (so no quota nor snapmirror), but now I know
wwhy the errors appeared.

I just managed to let the CacheAge show up (Hooray!!!) which I think
is an important parameter to check on your filer. Your netapp.tar-file
is great example to see the possibilities of devmon. When I am ready
(transforming minutes to seconds) I will send you the stuff if you
think it is useable.

Regards Peter

2006/6/8, Whilding, Craig <Cra...@me...>:
> Hi Peter,
>
> Not sure if you've already sorted it but on using
> DEVMON:tests(cpu,snapmirror,stats,status,volume) or whichever tests are
> applicable to your filer it got the volumes working so it does look like
> it was timing out looking for non existent quotas.
>
>
> Thanks,
> Craig
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
> Whilding, Craig
> Sent: 02 June 2006 14:29
> To: dev...@li...
> Subject: Re: [Devmon] NetApp & DevMon 0.2
>
> I think the problem may have something to do with the timeout delay for
> me at least. At the other site the filer shows everything including
> total size of the volumes but doesn't show size of volume used and
> therefore also the percentages saying no oid data returned. When testing
> this filer from the box here it didn't get to the volume oid's at all
> and only found half of the snapmirror data so I'm guessing a timeout is
> the cause. Ill have to run a debug and see what's happening.
>
> Yes there are some options for what to test you can put in bb-hosts;
> it's in the main readme.
>
> Craig
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of Gee
> Pee
> Sent: 02 June 2006 11:33
> To: dev...@li...
> Subject: Re: [Devmon] NetApp & DevMon 0.2
>
> Thanks for your quick response; yes, we are running 7.0.4 on our
> Fas270. But we also have some volumes in restricted mode or made
> the .-dir's  invisable.
>
>  From your response, I understand I can specify this in the bb-hosts
> file? Wow, that would be great if it worked this way. Let's
> experiment with this this weekend!!!
>
> Regards, Peter
>
> Op 2-jun-2006, om 10:50 heeft Whilding, Craig het volgende geschreven:
>
> > Don't worry, your previous message only turned up today!
> >
> > Some of my filers don't have snapmirror or quota and I have specified
> > which tests to do in the bb-hosts file for these. I used to use a
> > script
> > that could test the on/off oid's but I havnt got a way of putting this
> > in devmon currently.
> >
> > What version is your filer software? I have 7.0.1R1 on my site here
> > that
> > works but a filer at another site running 7.0.4 doesn't appear to have
> > volume working either. Looking through its logs it's saying no data
> > for
> > the oid's. Ill try an snmp walk on the oids just to check they are
> > there!
> >
> > Thanks,
> > Craig
> >
> > -----Original Message-----
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf Of
> > Peter
> > Welter
> > Sent: 01 June 2006 22:08
> > To: dev...@li...
> > Subject: Re: [Devmon] NetApp & DevMon 0.2
> >
> > Sorry, my previous mail was a little bit too hasty. I have to add that
> > the tests DO show in Hobbit (Thanks!). Since we do not have snapmirror
> > and quota enabled, I guess I have to remove them from the template
> > directory since the output does not have any value.
> >
> > The volume-part is the one that is responsible for the errors I think.
> > We do have them ;-)
> >
> > I'll have a look at the volume/oids-file later on but any suggestions
> > are very much appreciated.
> >
> > Peter
> >
> > 2006/6/1, Peter Welter <pet...@gm...>:
> >> Hi Craig,
> >>
> >> I've trying to run devmon 0.2.2 using your NetApp-tar-file, but I get
> >> the following errors when I run devmon in the foreground; what am I
> >> doing wrong?!
> >>
> >> Thanks, Peter
> >>
> >> [06-06-01@22:45:52] ---Initilizing devmon...
> >> [06-06-01@22:45:52] Node 0 reporting to localhost
> >> [06-06-01@22:45:52] Running under process id: 23044
> >> [06-06-01@22:45:52] Entering poll loop
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> Argument "No data" isn't numeric in numeric ge (>=) at
> >> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> >> 11.
> >> [06-06-01@22:45:53] No SNMP data found for qrVPathName on excalibur
> >> [06-06-01@22:45:53] No SNMP data found for qrVKBytesUsed on excalibur
> >> [06-06-01@22:45:53] No SNMP data found for qrVType on excalibur
> >> [06-06-01@22:45:53] No SNMP data found for qrVKBytesLimit on
> >> excalibur
> >> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> > qrVGBytesLimit
> >> [06-06-01@22:45:53] Missing repeater data for trans_switch on
> > qrTypeDescr
> >> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> > qrVGBytesUsed
> >> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> > qrPercentUsed
> >> [06-06-01@22:45:53] Missing repeater data for qrVPathName for quota
> > msg
> >> [06-06-01@22:45:53] No SNMP data found for dfKBytesTotal on excalibur
> >> [06-06-01@22:45:53] No SNMP data found for dfFileSys on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 11 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 7 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 17 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 2 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 1 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 18 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 13 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 16 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 6 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 3 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 9 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 12 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 15 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 14 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 8 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 4 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 10 of dfKBytesTotal
> >> on excalibur
> >> [06-06-01@22:45:53] Cant find snmp data for leaf 5 of
> >> dfKBytesTotal on
> > excalibur
> >> [06-06-01@22:45:53] Missing repeater data for dfFileSys for volume
> >> msg
> >> [06-06-01@22:45:53] No SNMP data found for snapmirrorLag on excalibur
> >> [06-06-01@22:45:53] No SNMP data found for snapmirrorDestination on
> > excalibur
> >> [06-06-01@22:45:53] No SNMP data found for snapmirrorSource on
> > excalibur
> >> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> >> snapmirrorLagSeconds
> >> [06-06-01@22:45:53] Missing repeater data for snapmirrorSource for
> >> snapmirror msg
> >>
> >> [06-06-01@22:46:42] Shutting down
> >>
> >>
> >>
> >> 2006/5/16, Whilding, Craig <Cra...@me...>:
> >>>
> >>>
> >>>
> >>>
> >>> See what you make of this, its what was originally sent out by me.
> >>> Snapmirror doesn't seem to work properly at the moment in 0.2 but
> > I've
> >>> informed Eric about that.
> >>>
> >>>
> >>>
> >>> Thanks,
> >>>
> >>>
> >>>
> >>> Craig Whilding
> >>>
> >>>
> >>>
> >>>  ________________________________
> >>>
> >>>
> >>> From: dev...@li...
> >>> [mailto:dev...@li...] On
> >>> Behalf Of Francesco Duranti
> >>>  Sent: 14 May 2006 16:05
> >>>  To: dev...@li...
> >>>  Subject: NetApp & DevMon 0.2
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Good work with the 0.2 of devmon !
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> I've saw in the past some posts with pieces of NetApp templates...
> >>>
> >>>
> >>> Anyone have a full template good to download to monitor NetApp
> > devices (and
> >>> graph them in rrd/trends of hobbit too)?
> >>>
> >>>
> >>>
> >>>
> >>>
> >>> Francesco Duranti
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >
> >
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> >
> >
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>

Re: [Devmon] NetApp & DevMon 0.2

[Whilding, C. <Cra...@me...>]

Hi Peter,

Not sure if you've already sorted it but on using
DEVMON:tests(cpu,snapmirror,stats,status,volume) or whichever tests are
applicable to your filer it got the volumes working so it does look like
it was timing out looking for non existent quotas.


Thanks,
Craig

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Whilding, Craig
Sent: 02 June 2006 14:29
To: dev...@li...
Subject: Re: [Devmon] NetApp & DevMon 0.2

I think the problem may have something to do with the timeout delay for
me at least. At the other site the filer shows everything including
total size of the volumes but doesn't show size of volume used and
therefore also the percentages saying no oid data returned. When testing
this filer from the box here it didn't get to the volume oid's at all
and only found half of the snapmirror data so I'm guessing a timeout is
the cause. Ill have to run a debug and see what's happening.

Yes there are some options for what to test you can put in bb-hosts;
it's in the main readme.

Craig

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of Gee
Pee
Sent: 02 June 2006 11:33
To: dev...@li...
Subject: Re: [Devmon] NetApp & DevMon 0.2

Thanks for your quick response; yes, we are running 7.0.4 on our =20
Fas270. But we also have some volumes in restricted mode or made =20
the .-dir's  invisable.

 From your response, I understand I can specify this in the bb-hosts =20
file? Wow, that would be great if it worked this way. Let's =20
experiment with this this weekend!!!

Regards, Peter

Op 2-jun-2006, om 10:50 heeft Whilding, Craig het volgende geschreven:

> Don't worry, your previous message only turned up today!
>
> Some of my filers don't have snapmirror or quota and I have specified
> which tests to do in the bb-hosts file for these. I used to use a =20
> script
> that could test the on/off oid's but I havnt got a way of putting this
> in devmon currently.
>
> What version is your filer software? I have 7.0.1R1 on my site here =20
> that
> works but a filer at another site running 7.0.4 doesn't appear to have
> volume working either. Looking through its logs it's saying no data =20
> for
> the oid's. Ill try an snmp walk on the oids just to check they are
> there!
>
> Thanks,
> Craig
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of =20
> Peter
> Welter
> Sent: 01 June 2006 22:08
> To: dev...@li...
> Subject: Re: [Devmon] NetApp & DevMon 0.2
>
> Sorry, my previous mail was a little bit too hasty. I have to add that
> the tests DO show in Hobbit (Thanks!). Since we do not have snapmirror
> and quota enabled, I guess I have to remove them from the template
> directory since the output does not have any value.
>
> The volume-part is the one that is responsible for the errors I think.
> We do have them ;-)
>
> I'll have a look at the volume/oids-file later on but any suggestions
> are very much appreciated.
>
> Peter
>
> 2006/6/1, Peter Welter <pet...@gm...>:
>> Hi Craig,
>>
>> I've trying to run devmon 0.2.2 using your NetApp-tar-file, but I get
>> the following errors when I run devmon in the foreground; what am I
>> doing wrong?!
>>
>> Thanks, Peter
>>
>> [06-06-01@22:45:52] ---Initilizing devmon...
>> [06-06-01@22:45:52] Node 0 reporting to localhost
>> [06-06-01@22:45:52] Running under process id: 23044
>> [06-06-01@22:45:52] Entering poll loop
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> [06-06-01@22:45:53] No SNMP data found for qrVPathName on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVKBytesUsed on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVType on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVKBytesLimit on =20
>> excalibur
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrVGBytesLimit
>> [06-06-01@22:45:53] Missing repeater data for trans_switch on
> qrTypeDescr
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrVGBytesUsed
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrPercentUsed
>> [06-06-01@22:45:53] Missing repeater data for qrVPathName for quota
> msg
>> [06-06-01@22:45:53] No SNMP data found for dfKBytesTotal on excalibur
>> [06-06-01@22:45:53] No SNMP data found for dfFileSys on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 11 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 7 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 17 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 2 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 1 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 18 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 13 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 16 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 6 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 3 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 9 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 12 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 15 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 14 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 8 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 4 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 10 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 5 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Missing repeater data for dfFileSys for volume =20
>> msg
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorLag on excalibur
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorDestination on
> excalibur
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorSource on
> excalibur
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
>> snapmirrorLagSeconds
>> [06-06-01@22:45:53] Missing repeater data for snapmirrorSource for
>> snapmirror msg
>>
>> [06-06-01@22:46:42] Shutting down
>>
>>
>>
>> 2006/5/16, Whilding, Craig <Cra...@me...>:
>>>
>>>
>>>
>>>
>>> See what you make of this, its what was originally sent out by me.
>>> Snapmirror doesn't seem to work properly at the moment in 0.2 but
> I've
>>> informed Eric about that.
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Craig Whilding
>>>
>>>
>>>
>>>  ________________________________
>>>
>>>
>>> From: dev...@li...
>>> [mailto:dev...@li...] On
>>> Behalf Of Francesco Duranti
>>>  Sent: 14 May 2006 16:05
>>>  To: dev...@li...
>>>  Subject: NetApp & DevMon 0.2
>>>
>>>
>>>
>>>
>>>
>>> Good work with the 0.2 of devmon !
>>>
>>>
>>>
>>>
>>>
>>> I've saw in the past some posts with pieces of NetApp templates...
>>>
>>>
>>> Anyone have a full template good to download to monitor NetApp
> devices (and
>>> graph them in rrd/trends of hobbit too)?
>>>
>>>
>>>
>>>
>>>
>>> Francesco Duranti
>>>
>>>
>>>
>>>
>>>
>>
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support



_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support


_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

Re: [Devmon] NetApp & DevMon 0.2

[Whilding, C. <Cra...@me...>]

I think the problem may have something to do with the timeout delay for
me at least. At the other site the filer shows everything including
total size of the volumes but doesn't show size of volume used and
therefore also the percentages saying no oid data returned. When testing
this filer from the box here it didn't get to the volume oid's at all
and only found half of the snapmirror data so I'm guessing a timeout is
the cause. Ill have to run a debug and see what's happening.

Yes there are some options for what to test you can put in bb-hosts;
it's in the main readme.

Craig

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of Gee
Pee
Sent: 02 June 2006 11:33
To: dev...@li...
Subject: Re: [Devmon] NetApp & DevMon 0.2

Thanks for your quick response; yes, we are running 7.0.4 on our =20
Fas270. But we also have some volumes in restricted mode or made =20
the .-dir's  invisable.

 From your response, I understand I can specify this in the bb-hosts =20
file? Wow, that would be great if it worked this way. Let's =20
experiment with this this weekend!!!

Regards, Peter

Op 2-jun-2006, om 10:50 heeft Whilding, Craig het volgende geschreven:

> Don't worry, your previous message only turned up today!
>
> Some of my filers don't have snapmirror or quota and I have specified
> which tests to do in the bb-hosts file for these. I used to use a =20
> script
> that could test the on/off oid's but I havnt got a way of putting this
> in devmon currently.
>
> What version is your filer software? I have 7.0.1R1 on my site here =20
> that
> works but a filer at another site running 7.0.4 doesn't appear to have
> volume working either. Looking through its logs it's saying no data =20
> for
> the oid's. Ill try an snmp walk on the oids just to check they are
> there!
>
> Thanks,
> Craig
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of =20
> Peter
> Welter
> Sent: 01 June 2006 22:08
> To: dev...@li...
> Subject: Re: [Devmon] NetApp & DevMon 0.2
>
> Sorry, my previous mail was a little bit too hasty. I have to add that
> the tests DO show in Hobbit (Thanks!). Since we do not have snapmirror
> and quota enabled, I guess I have to remove them from the template
> directory since the output does not have any value.
>
> The volume-part is the one that is responsible for the errors I think.
> We do have them ;-)
>
> I'll have a look at the volume/oids-file later on but any suggestions
> are very much appreciated.
>
> Peter
>
> 2006/6/1, Peter Welter <pet...@gm...>:
>> Hi Craig,
>>
>> I've trying to run devmon 0.2.2 using your NetApp-tar-file, but I get
>> the following errors when I run devmon in the foreground; what am I
>> doing wrong?!
>>
>> Thanks, Peter
>>
>> [06-06-01@22:45:52] ---Initilizing devmon...
>> [06-06-01@22:45:52] Node 0 reporting to localhost
>> [06-06-01@22:45:52] Running under process id: 23044
>> [06-06-01@22:45:52] Entering poll loop
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=3D) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> [06-06-01@22:45:53] No SNMP data found for qrVPathName on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVKBytesUsed on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVType on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVKBytesLimit on =20
>> excalibur
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrVGBytesLimit
>> [06-06-01@22:45:53] Missing repeater data for trans_switch on
> qrTypeDescr
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrVGBytesUsed
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrPercentUsed
>> [06-06-01@22:45:53] Missing repeater data for qrVPathName for quota
> msg
>> [06-06-01@22:45:53] No SNMP data found for dfKBytesTotal on excalibur
>> [06-06-01@22:45:53] No SNMP data found for dfFileSys on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 11 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 7 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 17 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 2 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 1 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 18 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 13 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 16 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 6 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 3 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 9 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 12 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 15 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 14 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 8 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 4 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 10 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 5 of =20
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Missing repeater data for dfFileSys for volume =20
>> msg
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorLag on excalibur
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorDestination on
> excalibur
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorSource on
> excalibur
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
>> snapmirrorLagSeconds
>> [06-06-01@22:45:53] Missing repeater data for snapmirrorSource for
>> snapmirror msg
>>
>> [06-06-01@22:46:42] Shutting down
>>
>>
>>
>> 2006/5/16, Whilding, Craig <Cra...@me...>:
>>>
>>>
>>>
>>>
>>> See what you make of this, its what was originally sent out by me.
>>> Snapmirror doesn't seem to work properly at the moment in 0.2 but
> I've
>>> informed Eric about that.
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Craig Whilding
>>>
>>>
>>>
>>>  ________________________________
>>>
>>>
>>> From: dev...@li...
>>> [mailto:dev...@li...] On
>>> Behalf Of Francesco Duranti
>>>  Sent: 14 May 2006 16:05
>>>  To: dev...@li...
>>>  Subject: NetApp & DevMon 0.2
>>>
>>>
>>>
>>>
>>>
>>> Good work with the 0.2 of devmon !
>>>
>>>
>>>
>>>
>>>
>>> I've saw in the past some posts with pieces of NetApp templates...
>>>
>>>
>>> Anyone have a full template good to download to monitor NetApp
> devices (and
>>> graph them in rrd/trends of hobbit too)?
>>>
>>>
>>>
>>>
>>>
>>> Francesco Duranti
>>>
>>>
>>>
>>>
>>>
>>
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support



_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

Re: [Devmon] NetApp & DevMon 0.2

[Gee P. <pet...@gm...>]

Thanks for your quick response; yes, we are running 7.0.4 on our  
Fas270. But we also have some volumes in restricted mode or made  
the .-dir's  invisable.

 From your response, I understand I can specify this in the bb-hosts  
file? Wow, that would be great if it worked this way. Let's  
experiment with this this weekend!!!

Regards, Peter

Op 2-jun-2006, om 10:50 heeft Whilding, Craig het volgende geschreven:

> Don't worry, your previous message only turned up today!
>
> Some of my filers don't have snapmirror or quota and I have specified
> which tests to do in the bb-hosts file for these. I used to use a  
> script
> that could test the on/off oid's but I havnt got a way of putting this
> in devmon currently.
>
> What version is your filer software? I have 7.0.1R1 on my site here  
> that
> works but a filer at another site running 7.0.4 doesn't appear to have
> volume working either. Looking through its logs it's saying no data  
> for
> the oid's. Ill try an snmp walk on the oids just to check they are
> there!
>
> Thanks,
> Craig
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of  
> Peter
> Welter
> Sent: 01 June 2006 22:08
> To: dev...@li...
> Subject: Re: [Devmon] NetApp & DevMon 0.2
>
> Sorry, my previous mail was a little bit too hasty. I have to add that
> the tests DO show in Hobbit (Thanks!). Since we do not have snapmirror
> and quota enabled, I guess I have to remove them from the template
> directory since the output does not have any value.
>
> The volume-part is the one that is responsible for the errors I think.
> We do have them ;-)
>
> I'll have a look at the volume/oids-file later on but any suggestions
> are very much appreciated.
>
> Peter
>
> 2006/6/1, Peter Welter <pet...@gm...>:
>> Hi Craig,
>>
>> I've trying to run devmon 0.2.2 using your NetApp-tar-file, but I get
>> the following errors when I run devmon in the foreground; what am I
>> doing wrong?!
>>
>> Thanks, Peter
>>
>> [06-06-01@22:45:52] ---Initilizing devmon...
>> [06-06-01@22:45:52] Node 0 reporting to localhost
>> [06-06-01@22:45:52] Running under process id: 23044
>> [06-06-01@22:45:52] Entering poll loop
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> Argument "No data" isn't numeric in numeric ge (>=) at
>> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
>> 11.
>> [06-06-01@22:45:53] No SNMP data found for qrVPathName on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVKBytesUsed on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVType on excalibur
>> [06-06-01@22:45:53] No SNMP data found for qrVKBytesLimit on  
>> excalibur
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrVGBytesLimit
>> [06-06-01@22:45:53] Missing repeater data for trans_switch on
> qrTypeDescr
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrVGBytesUsed
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> qrPercentUsed
>> [06-06-01@22:45:53] Missing repeater data for qrVPathName for quota
> msg
>> [06-06-01@22:45:53] No SNMP data found for dfKBytesTotal on excalibur
>> [06-06-01@22:45:53] No SNMP data found for dfFileSys on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 11 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 7 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 17 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 2 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 1 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 18 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 13 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 16 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 6 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 3 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 9 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 12 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 15 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 14 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 8 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 4 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 10 of dfKBytesTotal
>> on excalibur
>> [06-06-01@22:45:53] Cant find snmp data for leaf 5 of  
>> dfKBytesTotal on
> excalibur
>> [06-06-01@22:45:53] Missing repeater data for dfFileSys for volume  
>> msg
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorLag on excalibur
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorDestination on
> excalibur
>> [06-06-01@22:45:53] No SNMP data found for snapmirrorSource on
> excalibur
>> [06-06-01@22:45:53] Missing primary oid data for trans_math on
>> snapmirrorLagSeconds
>> [06-06-01@22:45:53] Missing repeater data for snapmirrorSource for
>> snapmirror msg
>>
>> [06-06-01@22:46:42] Shutting down
>>
>>
>>
>> 2006/5/16, Whilding, Craig <Cra...@me...>:
>>>
>>>
>>>
>>>
>>> See what you make of this, its what was originally sent out by me.
>>> Snapmirror doesn't seem to work properly at the moment in 0.2 but
> I've
>>> informed Eric about that.
>>>
>>>
>>>
>>> Thanks,
>>>
>>>
>>>
>>> Craig Whilding
>>>
>>>
>>>
>>>  ________________________________
>>>
>>>
>>> From: dev...@li...
>>> [mailto:dev...@li...] On
>>> Behalf Of Francesco Duranti
>>>  Sent: 14 May 2006 16:05
>>>  To: dev...@li...
>>>  Subject: NetApp & DevMon 0.2
>>>
>>>
>>>
>>>
>>>
>>> Good work with the 0.2 of devmon !
>>>
>>>
>>>
>>>
>>>
>>> I've saw in the past some posts with pieces of NetApp templates...
>>>
>>>
>>> Anyone have a full template good to download to monitor NetApp
> devices (and
>>> graph them in rrd/trends of hobbit too)?
>>>
>>>
>>>
>>>
>>>
>>> Francesco Duranti
>>>
>>>
>>>
>>>
>>>
>>
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support

Re: [Devmon] NetApp & DevMon 0.2

[Whilding, C. <Cra...@me...>]

Don't worry, your previous message only turned up today!

Some of my filers don't have snapmirror or quota and I have specified
which tests to do in the bb-hosts file for these. I used to use a script
that could test the on/off oid's but I havnt got a way of putting this
in devmon currently.

What version is your filer software? I have 7.0.1R1 on my site here that
works but a filer at another site running 7.0.4 doesn't appear to have
volume working either. Looking through its logs it's saying no data for
the oid's. Ill try an snmp walk on the oids just to check they are
there!

Thanks,
Craig

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of Peter
Welter
Sent: 01 June 2006 22:08
To: dev...@li...
Subject: Re: [Devmon] NetApp & DevMon 0.2

Sorry, my previous mail was a little bit too hasty. I have to add that
the tests DO show in Hobbit (Thanks!). Since we do not have snapmirror
and quota enabled, I guess I have to remove them from the template
directory since the output does not have any value.

The volume-part is the one that is responsible for the errors I think.
We do have them ;-)

I'll have a look at the volume/oids-file later on but any suggestions
are very much appreciated.

Peter

2006/6/1, Peter Welter <pet...@gm...>:
> Hi Craig,
>
> I've trying to run devmon 0.2.2 using your NetApp-tar-file, but I get
> the following errors when I run devmon in the foreground; what am I
> doing wrong?!
>
> Thanks, Peter
>
> [06-06-01@22:45:52] ---Initilizing devmon...
> [06-06-01@22:45:52] Node 0 reporting to localhost
> [06-06-01@22:45:52] Running under process id: 23044
> [06-06-01@22:45:52] Entering poll loop
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=3D) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> [06-06-01@22:45:53] No SNMP data found for qrVPathName on excalibur
> [06-06-01@22:45:53] No SNMP data found for qrVKBytesUsed on excalibur
> [06-06-01@22:45:53] No SNMP data found for qrVType on excalibur
> [06-06-01@22:45:53] No SNMP data found for qrVKBytesLimit on excalibur
> [06-06-01@22:45:53] Missing primary oid data for trans_math on
qrVGBytesLimit
> [06-06-01@22:45:53] Missing repeater data for trans_switch on
qrTypeDescr
> [06-06-01@22:45:53] Missing primary oid data for trans_math on
qrVGBytesUsed
> [06-06-01@22:45:53] Missing primary oid data for trans_math on
qrPercentUsed
> [06-06-01@22:45:53] Missing repeater data for qrVPathName for quota
msg
> [06-06-01@22:45:53] No SNMP data found for dfKBytesTotal on excalibur
> [06-06-01@22:45:53] No SNMP data found for dfFileSys on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 11 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 7 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 17 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 2 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 1 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 18 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 13 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 16 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 6 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 3 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 9 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 12 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 15 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 14 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 8 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 4 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 10 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 5 of dfKBytesTotal on
excalibur
> [06-06-01@22:45:53] Missing repeater data for dfFileSys for volume msg
> [06-06-01@22:45:53] No SNMP data found for snapmirrorLag on excalibur
> [06-06-01@22:45:53] No SNMP data found for snapmirrorDestination on
excalibur
> [06-06-01@22:45:53] No SNMP data found for snapmirrorSource on
excalibur
> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> snapmirrorLagSeconds
> [06-06-01@22:45:53] Missing repeater data for snapmirrorSource for
> snapmirror msg
>
> [06-06-01@22:46:42] Shutting down
>
>
>
> 2006/5/16, Whilding, Craig <Cra...@me...>:
> >
> >
> >
> >
> > See what you make of this, its what was originally sent out by me.
> > Snapmirror doesn't seem to work properly at the moment in 0.2 but
I've
> > informed Eric about that.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Craig Whilding
> >
> >
> >
> >  ________________________________
> >
> >
> > From: dev...@li...
> > [mailto:dev...@li...] On
> > Behalf Of Francesco Duranti
> >  Sent: 14 May 2006 16:05
> >  To: dev...@li...
> >  Subject: NetApp & DevMon 0.2
> >
> >
> >
> >
> >
> > Good work with the 0.2 of devmon !
> >
> >
> >
> >
> >
> > I've saw in the past some posts with pieces of NetApp templates...
> >
> >
> > Anyone have a full template good to download to monitor NetApp
devices (and
> > graph them in rrd/trends of hobbit too)?
> >
> >
> >
> >
> >
> > Francesco Duranti
> >
> >
> >
> >
> >
>


_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

Re: [Devmon] NetApp & DevMon 0.2

[Peter W. <pet...@gm...>]

Hi Craig,

I've trying to run devmon 0.2.2 using your NetApp-tar-file, but I get
the following errors when I run devmon in the foreground; what am I
doing wrong?!

Thanks, Peter

[06-06-01@22:45:52] ---Initilizing devmon...
[06-06-01@22:45:52] Node 0 reporting to localhost
[06-06-01@22:45:52] Running under process id: 23044
[06-06-01@22:45:52] Entering poll loop
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
Argument "No data" isn't numeric in numeric ge (>=) at
/etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
11.
[06-06-01@22:45:53] No SNMP data found for qrVPathName on excalibur
[06-06-01@22:45:53] No SNMP data found for qrVKBytesUsed on excalibur
[06-06-01@22:45:53] No SNMP data found for qrVType on excalibur
[06-06-01@22:45:53] No SNMP data found for qrVKBytesLimit on excalibur
[06-06-01@22:45:53] Missing primary oid data for trans_math on qrVGBytesLimit
[06-06-01@22:45:53] Missing repeater data for trans_switch on qrTypeDescr
[06-06-01@22:45:53] Missing primary oid data for trans_math on qrVGBytesUsed
[06-06-01@22:45:53] Missing primary oid data for trans_math on qrPercentUsed
[06-06-01@22:45:53] Missing repeater data for qrVPathName for quota msg
[06-06-01@22:45:53] No SNMP data found for dfKBytesTotal on excalibur
[06-06-01@22:45:53] No SNMP data found for dfFileSys on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 11 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 7 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 17 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 2 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 1 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 18 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 13 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 16 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 6 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 3 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 9 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 12 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 15 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 14 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 8 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 4 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 10 of dfKBytesTotal
on excalibur
[06-06-01@22:45:53] Cant find snmp data for leaf 5 of dfKBytesTotal on excalibur
[06-06-01@22:45:53] Missing repeater data for dfFileSys for volume msg
[06-06-01@22:45:53] No SNMP data found for snapmirrorLag on excalibur
[06-06-01@22:45:53] No SNMP data found for snapmirrorDestination on excalibur
[06-06-01@22:45:53] No SNMP data found for snapmirrorSource on excalibur
[06-06-01@22:45:53] Missing primary oid data for trans_math on
snapmirrorLagSeconds
[06-06-01@22:45:53] Missing repeater data for snapmirrorSource for
snapmirror msg

[06-06-01@22:46:42] Shutting down



2006/5/16, Whilding, Craig <Cra...@me...>:
>
>
>
>
> See what you make of this, its what was originally sent out by me.
> Snapmirror doesn't seem to work properly at the moment in 0.2 but I've
> informed Eric about that.
>
>
>
> Thanks,
>
>
>
> Craig Whilding
>
>
>
>  ________________________________
>
>
> From: dev...@li...
> [mailto:dev...@li...] On
> Behalf Of Francesco Duranti
>  Sent: 14 May 2006 16:05
>  To: dev...@li...
>  Subject: NetApp & DevMon 0.2
>
>
>
>
>
> Good work with the 0.2 of devmon !
>
>
>
>
>
> I've saw in the past some posts with pieces of NetApp templates...
>
>
> Anyone have a full template good to download to monitor NetApp devices (and
> graph them in rrd/trends of hobbit too)?
>
>
>
>
>
> Francesco Duranti
>
>
>
>
>

Re: [Devmon] NetApp & DevMon 0.2

[Peter W. <pet...@gm...>]

Sorry, my previous mail was a little bit too hasty. I have to add that
the tests DO show in Hobbit (Thanks!). Since we do not have snapmirror
and quota enabled, I guess I have to remove them from the template
directory since the output does not have any value.

The volume-part is the one that is responsible for the errors I think.
We do have them ;-)

I'll have a look at the volume/oids-file later on but any suggestions
are very much appreciated.

Peter

2006/6/1, Peter Welter <pet...@gm...>:
> Hi Craig,
>
> I've trying to run devmon 0.2.2 using your NetApp-tar-file, but I get
> the following errors when I run devmon in the foreground; what am I
> doing wrong?!
>
> Thanks, Peter
>
> [06-06-01@22:45:52] ---Initilizing devmon...
> [06-06-01@22:45:52] Node 0 reporting to localhost
> [06-06-01@22:45:52] Running under process id: 23044
> [06-06-01@22:45:52] Entering poll loop
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> Argument "No data" isn't numeric in numeric ge (>=) at
> /etc/hobbit/devmon/modules/dm_tests.pm line 2568, <$__ANONIO__> line
> 11.
> [06-06-01@22:45:53] No SNMP data found for qrVPathName on excalibur
> [06-06-01@22:45:53] No SNMP data found for qrVKBytesUsed on excalibur
> [06-06-01@22:45:53] No SNMP data found for qrVType on excalibur
> [06-06-01@22:45:53] No SNMP data found for qrVKBytesLimit on excalibur
> [06-06-01@22:45:53] Missing primary oid data for trans_math on qrVGBytesLimit
> [06-06-01@22:45:53] Missing repeater data for trans_switch on qrTypeDescr
> [06-06-01@22:45:53] Missing primary oid data for trans_math on qrVGBytesUsed
> [06-06-01@22:45:53] Missing primary oid data for trans_math on qrPercentUsed
> [06-06-01@22:45:53] Missing repeater data for qrVPathName for quota msg
> [06-06-01@22:45:53] No SNMP data found for dfKBytesTotal on excalibur
> [06-06-01@22:45:53] No SNMP data found for dfFileSys on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 11 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 7 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 17 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 2 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 1 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 18 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 13 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 16 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 6 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 3 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 9 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 12 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 15 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 14 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 8 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 4 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 10 of dfKBytesTotal
> on excalibur
> [06-06-01@22:45:53] Cant find snmp data for leaf 5 of dfKBytesTotal on excalibur
> [06-06-01@22:45:53] Missing repeater data for dfFileSys for volume msg
> [06-06-01@22:45:53] No SNMP data found for snapmirrorLag on excalibur
> [06-06-01@22:45:53] No SNMP data found for snapmirrorDestination on excalibur
> [06-06-01@22:45:53] No SNMP data found for snapmirrorSource on excalibur
> [06-06-01@22:45:53] Missing primary oid data for trans_math on
> snapmirrorLagSeconds
> [06-06-01@22:45:53] Missing repeater data for snapmirrorSource for
> snapmirror msg
>
> [06-06-01@22:46:42] Shutting down
>
>
>
> 2006/5/16, Whilding, Craig <Cra...@me...>:
> >
> >
> >
> >
> > See what you make of this, its what was originally sent out by me.
> > Snapmirror doesn't seem to work properly at the moment in 0.2 but I've
> > informed Eric about that.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Craig Whilding
> >
> >
> >
> >  ________________________________
> >
> >
> > From: dev...@li...
> > [mailto:dev...@li...] On
> > Behalf Of Francesco Duranti
> >  Sent: 14 May 2006 16:05
> >  To: dev...@li...
> >  Subject: NetApp & DevMon 0.2
> >
> >
> >
> >
> >
> > Good work with the 0.2 of devmon !
> >
> >
> >
> >
> >
> > I've saw in the past some posts with pieces of NetApp templates...
> >
> >
> > Anyone have a full template good to download to monitor NetApp devices (and
> > graph them in rrd/trends of hobbit too)?
> >
> >
> >
> >
> >
> > Francesco Duranti
> >
> >
> >
> >
> >
>

Re: [Devmon] NetApp & DevMon 0.2

[Whilding, C. <Cra...@me...>]

Hi, the patch fails with the attached errors under the 4.2 builds and
only seems to work on 4.1.2.

Thanks,
Craig

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Schwimmer, Eric E *HS
Sent: 18 May 2006 15:52
To: dev...@li...
Subject: RE: [Devmon] RE: NetApp & DevMon 0.2


Not to my knowledge.  I've been ably to just copy my modified version
over the newer
versions and compile without making modifications to my version.  Try
putting
the attached patch in your hobbit src directory and running a patch -p0
< patch-devmon-collectors.
Then recompile and copy over the hobbit/hobbit_rrd binary to your
$BBHOME/bin dir,
and restart hobbit.

-Eric Schwimmer
Network Engineer
UVA HSCS Network Engineering =20

> -----Original Message-----
> From: dev...@li...=20
> [mailto:dev...@li...] On Behalf=20
> Of Whilding, Craig
> Sent: Thursday, May 18, 2006 10:41 AM
> To: dev...@li...
> Subject: RE: [Devmon] RE: NetApp & DevMon 0.2
>=20
> Yes ill be interested in a copy of that. Has this file=20
> changed in recent
> versions of hobbit do you know, just wondering if its likely to be
> overwritten.
> Thanks
>=20
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
> Schwimmer, Eric E *HS
> Sent: 18 May 2006 15:35
> To: dev...@li...
> Subject: RE: [Devmon] RE: NetApp & DevMon 0.2
>=20
>=20
> Oh, you'll need to throw the string 'bb-xsnmp' in there
> somewhere so that hobbit will know that you're feeding
> it bb-xsnmp-like data.
>=20
> Alternative, I have a version of do_la.c that works with
> the standard devmon cpu output, if you're interested.
>=20
> -Eric Schwimmer
> Network Engineer
> UVA HSCS Network Engineering =20
>=20
> > -----Original Message-----
> > From: dev...@li...=20
> > [mailto:dev...@li...] On Behalf=20
> > Of Whilding, Craig
> > Sent: Wednesday, May 17, 2006 5:00 AM
> > To: dev...@li...
> > Subject: RE: [Devmon] RE: NetApp & DevMon 0.2
> >=20
> > Hmm, doesn't appear to give me a graph :(
> >=20
> > -----Original Message-----
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf Of
> > Schwimmer, Eric E *HS
> > Sent: 16 May 2006 16:53
> > To: dev...@li...
> > Subject: RE: [Devmon] RE: NetApp & DevMon 0.2
> >=20
> >=20
> > From hobbit-4.1.2p1/hobbitd/rrd/do_la.c :
> >=20
> > CPU Usage=3DNUMBER
> >=20
> >=20
> >=20
> > -----Original Message-----
> > From: dev...@li... on behalf of=20
> > Whilding,
> > Craig
> > Sent: Tue 5/16/2006 10:21 AM
> > To: dev...@li...
> > Subject: RE: [Devmon] RE: NetApp & DevMon 0.2
> > =20
> > Actually on this subject (and glad to see the list working=20
> > again), does
> > anyone know how to format the cpu message so it graphs automatically
> > using the standard cpu graphing in hobbit?
> >=20
> > Craig
> >=20
> > ________________________________
> >=20
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf Of
> > Whilding, Craig
> > Sent: 16 May 2006 15:19
> > To: dev...@li...
> > Subject: [Devmon] RE: NetApp & DevMon 0.2
> >=20
> > =20
> >=20
> > See what you make of this, its what was originally sent out by me.
> > Snapmirror doesn't seem to work properly at the moment in=20
> 0.2 but I've
> > informed Eric about that.
> >=20
> > =20
> >=20
> > Thanks,
> >=20
> > =20
> >=20
> > Craig Whilding
> >=20
> > =20
> >=20
> > ________________________________
> >=20
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf Of
> > Francesco Duranti
> > Sent: 14 May 2006 16:05
> > To: dev...@li...
> > Subject: NetApp & DevMon 0.2
> >=20
> > =20
> >=20
> > Good work with the 0.2 of devmon !
> >=20
> > =20
> >=20
> > I've saw in the past some posts with pieces of NetApp templates...
> >=20
> > Anyone have a full template good to download to monitor=20
> NetApp devices
> > (and graph them in rrd/trends of hobbit too)?
> >=20
> > =20
> >=20
> > Francesco Duranti
> >=20
> > =20
> >=20
> >=20
> >=20
> >=20
> > -------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web=20
> > services, security?
> > Get stuff done quickly with pre-integrated technology to make=20
> > your job easier
> > Download IBM WebSphere Application Server v.1.0.1 based on=20
> > Apache Geronimo
> > =
http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=120709&bid&3057&dat=121642
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> >=20
>=20
>=20
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
> security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=120709&bid&3057&dat=121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>=20
>=20
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web=20
> services, security?
> Get stuff done quickly with pre-integrated technology to make=20
> your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on=20
> Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dk&kid=120709&bid&3057&dat=121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>=20

[Devmon] TSWITCH & READBBHOSTS problems

[Whilding, C. <Cra...@me...>]

When I try to use TSWITCH transform on a variable that has been created
through the MATH transform it gives an error as its in the form 0.00
which TSWITCH doesn't support.=20

=20

READBBHOSTS does read include files but it doesn't recognise the NET:xxx
tag being on and so adds all files with the DEVMON tag including those
im monitoring from a different server and just displaying.

=20

Second ones not much of a problem as I can manually delete hosts it
tries to add (I don't run it as a cron job). The 1st problem has put my
dhcp check on hold at the moment.

=20

Cheers,

=20

Craig Whilding

IT Systems Administrator
Edward Court=20
Altrincham Business Park=20
Altrincham=20
WA14 5GL=20
Tel: + 44 (0)161 926 1643
email: cra...@me...=20
www.mentor.com
<file:///C:\Documents%20and%20Settings\cwhildin\Application%20Data\Micro
soft\Signatures\www.mentor.com> =20

=20