devmon-support — General Devmon support

[Devmon] Cisco 3825, 2811 and 2851

[Rich S. <rsm...@wi...>]

Are there templates available for the Cisco routers in the subject?

I would certainly prefer to have a working set, but in the meantime I'm 
trying to convert an existing template for the 3825.  I collected all of 
the SNMP data from the 3825 and there is no indication of any CPU data 
being available.  I'm going to guess I'm out of luck to get CPU info, 
but I wanted to make sure... :)
-- 
Rich Smrcina
VM Assist, Inc.
Phone: 414-491-6001
Ans Service:  360-715-2467
rich.smrcina at vmassist.com

Catch the WAVV!  http://www.wavv.org
WAVV 2007 - Green Bay, WI - May 18-22, 2007

[Devmon] Elapsed Transform

[Taylor, R. <Rob...@He...>]

I am trying to transform an Integer that represents the number of
seconds an IPSec tunnel has been active.  Whenever devmon runs I get the
following error message:

=20

[root@hobbit if_stat]# /usr/local/devmon/devmon -vv -f

[07-03-14@16:26:19] ---Initilizing devmon...

[07-03-14@16:26:19] Verbosity level: 2

[07-03-14@16:26:19] Logging to /var/log/devmon.log

[07-03-14@16:26:19] Node 0 reporting to localhost

[07-03-14@16:26:19] Running under process id: 4504

[07-03-14@16:26:19] Entering poll loop

[07-03-14@16:26:25] Starting snmp queries

[07-03-14@16:26:53] Performing test logic

Can't use string ("2 days, 03:09:52") as a HASH ref while "strict refs"
in use at /usr/local/devmon-0.3.0-beta1/modules/dm_tests.pm line 1767,
<$__ANONIO__> line 661.

=20

Any ideas?

=20

Thanks,

Robert

=20

Re: [Devmon] devmon 0.3.0 beta1 released

[Schwimmer, E. E *H. <EE...@hs...>]

Found a not-so-little bug in the validate_deps subroutine.  Basically if
you were a using a transform with more than one non-repeater oid in the
transform message, the resulting transformed oid would always have a
color value of 'clear' (yikes).  A good example would be the BEST
transform used during the apc 'power' tests.

The devmon tarball on sf.net has been updated, but in case you already
downloaded the beta version and just want to patch it, please use the
attached file.

-Eric

> -----Original Message-----
> From: dev...@li...=20
> [mailto:dev...@li...] On=20
> Behalf Of Schwimmer, Eric E *HS
> Sent: Tuesday, March 06, 2007 7:51 PM
> To: dev...@li...
> Subject: [Devmon] devmon 0.3.0 beta1 released
>=20
>=20
> Haha, I lied!  I said it would be in a couple of days, didn't=20
> I?  My wife is out of town until Sunday, so that leaves me=20
> with a lot of time on my hands that I don't know what to do with.
>=20
> Well, anyways, here's the first beta.  It has been running on=20
> our cluster here for a few days without too much pain, but=20
> some of the new features haven't been thoroughly tested.  You=20
> have been warned :)
>=20
> That being said, here's the change log.  Not really much to=20
> say for the
> 8+ months since the last release, but it's better than nothing:
>=20
> Devmon v0.3.0 :: Release date TBA
>=20
>   Changed:
>   - Moved templates to their own distribution file and added several
>     community-created templates (with proper kudos noted in each
> template)
>   - Changed UNPACK transform type to support more complicated
>     (and powerful) unpack expressions, and separator characters.
>   - Changed the way numeric primary keys are sorted in tables
>     to allow numeric ascending sorts for multi-level leaves.
>   - Changed the docs/INSTALLATION to clarify how DEVMON operates.
>   - Removed the .rrd OID flag and replaced it with an RRD table
>     option.
>   - Recoded most translation subroutines to optimize performance
>   - Added more debug output, and defined the --debug flag in=20
> the help output
>=20
>   Added:
>   - Added a timeout watchdog for all transforms, set at 5 seconds.
>   - Added ability to specify SNMP port that a particular device uses
>   - Added bi-directional communication with the hobbit=20
> server, allowing
>     the client to avoid testing against devices which hobbit
>     recognizes as unreachable (i.e. a red 'conn' test).
>   - Added CHAIN transform, which allows you to chain OIDs together
>   - Added ability to display template threshold values in=20
> devmon output
>=20
>   Bugfixes:
>   - Fixed DBHOST config file entry so that it allows non
>     alpha-numeric characters (which was preventing people from using
>     FQDN hostnames).
>   - Fixed cisco 3500 templates to correctly translate ifc speed
>   - Fixed REGSUB transform to work on leaf OIDs (Gaetan Frenoy)
>=20
> --------------------------------------------------------------
> -----------
> Take Surveys. Earn Cash. Influence the Future of IT Join=20
> SourceForge.net's Techsay panel and you'll get the chance to=20
> share your opinions on IT & business topics through brief=20
> surveys-and earn cash=20
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge
&CID=3DDEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>=20

Re: [Devmon] devmon 0.3.0 beta1 released

[Torben A. <tor...@gm...>]

Hi Eric


Haha, I lied!  I said it would be in a couple of days, didn't I?  My
> wife is out of town until Sunday, so that leaves me with a lot of time
> on my hands that I don't know what to do with.


Guess we have to finish our beta testing before sunday then :=)

Sound great - I'll see if I can find a few hours this week to update our
platforms.

Thanks a lot ..

BR
/Torben

[Devmon] devmon 0.3.0 beta1 released

[Schwimmer, E. E *H. <EE...@hs...>]

Haha, I lied!  I said it would be in a couple of days, didn't I?  My
wife is out of town until Sunday, so that leaves me with a lot of time
on my hands that I don't know what to do with.

Well, anyways, here's the first beta.  It has been running on our
cluster here for a few days without too much pain, but some of the new
features haven't been thoroughly tested.  You have been warned :)

That being said, here's the change log.  Not really much to say for the
8+ months since the last release, but it's better than nothing:

Devmon v0.3.0 :: Release date TBA

  Changed:
  - Moved templates to their own distribution file and added several
    community-created templates (with proper kudos noted in each
template)
  - Changed UNPACK transform type to support more complicated
    (and powerful) unpack expressions, and separator characters.
  - Changed the way numeric primary keys are sorted in tables
    to allow numeric ascending sorts for multi-level leaves.
  - Changed the docs/INSTALLATION to clarify how DEVMON operates.
  - Removed the .rrd OID flag and replaced it with an RRD table
    option.
  - Recoded most translation subroutines to optimize performance
  - Added more debug output, and defined the --debug flag in the help
output

  Added:
  - Added a timeout watchdog for all transforms, set at 5 seconds.
  - Added ability to specify SNMP port that a particular device uses
  - Added bi-directional communication with the hobbit server, allowing
    the client to avoid testing against devices which hobbit
    recognizes as unreachable (i.e. a red 'conn' test).
  - Added CHAIN transform, which allows you to chain OIDs together
  - Added ability to display template threshold values in devmon output

  Bugfixes:
  - Fixed DBHOST config file entry so that it allows non
    alpha-numeric characters (which was preventing people from using
    FQDN hostnames).
  - Fixed cisco 3500 templates to correctly translate ifc speed
  - Fixed REGSUB transform to work on leaf OIDs (Gaetan Frenoy)

Re: [Devmon] devmon crash on templates

[Schwimmer, E. E *H. <EE...@hs...>]

Hrm.  A malformed template definitely shouldn't cause devmon to crash.
If you can reproduce the error, would you mind running devmon with the
--debug and -vvv flags and sending the last few pertinent lines to me?

Thanks!
-Eric

> -----Original Message-----
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Marganne, Etienne
> Sent: Friday, March 02, 2007 5:40 AM
> To: dev...@li...
> Subject: [Devmon] devmon crash on templates
>=20
> Hello all,
>=20
>=20
>=20
> I tried and made work Devmon by yesterday after experiencing some
still
> unidentified issues I have come to make it work properly. I must say
to
> the originators of this tool that it is really a good one (maybe one
of
> the best for Hobbit).
>=20
>=20
>=20
> This morning is started writing some templates which can be available
to
> people who need them and I experience another crash. While I was
writing
> templates, devmon main daemon (the master one) crashed silently. I
guess
> the error comes from the fact that it experienced an unexpected token
> while reading the "being written" template files.
>=20
>=20
>=20
> Has anyone already seen such event? Do we really need to stop and
restart
> devmon when importing a new template?
>=20
>=20
>=20
> Etienne Marganne
>=20
> TI Automotive.
>=20
> The information contained in this transmission may contain privileged
and
> confidential information. It is intended only for the use of the
person(s)
> named above. If you are not the intended recipient, you are hereby
> notified that any review, dissemination, distribution or duplication
of
> this communication is strictly prohibited. If you are not the intended
> recipient, please contact the sender by reply email and destroy all
copies
> of the original message.
>=20

Re: [Devmon] BB4 and Devmon

[Schwimmer, E. E *H. <EE...@hs...>]

In theory it *should* work, since they both use the same message passing
protocol.  I only ran bb4 for a few months before we transitioned to
hobbit (I'll firmly state that I prefer hobbit :), and I hadn't really
started working on devmon at that point. =20

However, I did try to make devmon backwards compatible with bb4, but
haven't tested it in a production environment, so your mileage may vary.
If someone would like to give it a go, I'd be willing to try and fix any
bugs that will inevitably creep up.

-Eric

> -----Original Message-----
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Michael A. Price
> Sent: Tuesday, March 06, 2007 4:40 PM
> To: dev...@li...
> Subject: [Devmon] BB4 and Devmon
>=20
> I am currently running devmon with hobbit, but I would like to know if
> devmon can work with BB4 ???
>=20
> thanks, michael
>=20
>=20
> Michael A. Price
> SGT, Inc. www.sgt-inc.com
> NASA/GSFC Code 440.8/LMB
> Greenbelt, Maryland 20770
>             Phone:  240-684-1356
>             Cell:   410-507-7476
>             e-mail: mp...@sg...
> 	    e-mail: mp...@hs...
> ----------------------------------------------
>=20
>=20
>=20
> >
>=20
>
------------------------------------------------------------------------
-
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to
share
> your
> opinions on IT & business topics through brief surveys-and earn cash
>
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support

[Devmon] BB4 and Devmon

[Michael A. P. <mp...@hs...>]

I am currently running devmon with hobbit, but I would like to know if 
devmon can work with BB4 ???

thanks, michael


Michael A. Price
SGT, Inc. www.sgt-inc.com
NASA/GSFC Code 440.8/LMB
Greenbelt, Maryland 20770
            Phone:  240-684-1356
            Cell:   410-507-7476
            e-mail: mp...@sg...
	    e-mail: mp...@hs...
----------------------------------------------



>   

Re: [Devmon] Daemon stops sending data

[Schwimmer, E. E *H. <EE...@hs...>]

Hum.  Sounds like devmon is hanging somewheres.  I've been thinking of
wrapping the transform code with an alarm function to prevent this from
happening (I've had this problem myself after writing a few bad
templates).

I'll be rolling out the beta version of devmon 3.0 in the next day or so
(I promise!), and I'll throw that code in there.  If it's a devmon bug,
we can fix it up before the final 3.0 release. :)

-Eric

> -----Original Message-----
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Matthew Epp
> Sent: Tuesday, March 06, 2007 1:25 PM
> To: dev...@li...
> Subject: [Devmon] Daemon stops sending data
>=20
> I've been searching the list archives but haven't found any
information
> on the issue I'm having. Basically, after a random amount of time
> (anywhere from a few days to a week), all of my SNMP tests go purple.
> I'm using the latest Hobbit, by the way. Looking at the log file, it
> still seems to be running in the background, but apparently none of
that
> data is getting sent to the display server, which is the same server
> running devmon. A pkill and restart of devmon fixes the problem every
> time, but I cannot figure out why it's failing in the first place. I
> just tried running a ./devmon -vvvvv yesterday, but when I checked
> today, even though I am still getting data to Hobbit, the log file is
no
> longer being appended to anymore. Anyone else having this problem?
>=20
>
------------------------------------------------------------------------
-
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to
share
> your
> opinions on IT & business topics through brief surveys-and earn cash
>
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support

[Devmon] Daemon stops sending data

[Matthew E. <mat...@us...>]

I've been searching the list archives but haven't found any information 
on the issue I'm having. Basically, after a random amount of time 
(anywhere from a few days to a week), all of my SNMP tests go purple. 
I'm using the latest Hobbit, by the way. Looking at the log file, it 
still seems to be running in the background, but apparently none of that 
data is getting sent to the display server, which is the same server 
running devmon. A pkill and restart of devmon fixes the problem every 
time, but I cannot figure out why it's failing in the first place. I 
just tried running a ./devmon -vvvvv yesterday, but when I checked 
today, even though I am still getting data to Hobbit, the log file is no 
longer being appended to anymore. Anyone else having this problem?

[Devmon] Performances over huge networks

[Marganne, E. <ema...@be...>]

Hello all,

 

I have a question about Devmon performances on huge networks. I saw in the
config file that there were a lot of different times and interval to
configure. I understood pretty well what they mean but I have no really
ideas of how they could influence the Devmon behavior on polling. The point
is that I want to get the data from my pollings just in time so that the
tests do not turn red or white. Another point would be to save resource on
the device running Devmon and also not to have too long polling time.

 

The idea is to collect date about your configurations a brief description of
your network type and the reasons of your choices so that beginners like me
can set up their mind about their most comfortable configurations.

 

Thank you,

 

Etienne Marganne

TI Automotive.



The information contained in this transmission may contain privileged and confidential information.  It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

Re: [Devmon] Graphs in Hobbit

[Torben A. <tor...@gm...>]

Hi Robert

Search for the thread "NCV parsing status message" started Jan 24 on the
devmon list.

Good luck

BR
/Torben

On 3/1/07, Robert Holden <rob...@gm...> wrote:
>
> I just recently joined this group and have searched the archives trying to
> figure out how to get graphs to show up for devmon in hobbit.  I read on the
> hobbit discussion board that the topic was discussed here, and that someone
> sent instructions out.  If so, can someone forward me (or the group) a
> repeat of these instructions.  If not, anyone care to share how they did
> it?  I imagine it has something to do with NCV.
>
> Robert
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>

[Devmon] devmon crash on templates

[Marganne, E. <ema...@be...>]

Hello all,

 

I tried and made work Devmon by yesterday after experiencing some still
unidentified issues I have come to make it work properly. I must say to the
originators of this tool that it is really a good one (maybe one of the best
for Hobbit). 

 

This morning is started writing some templates which can be available to
people who need them and I experience another crash. While I was writing
templates, devmon main daemon (the master one) crashed silently. I guess the
error comes from the fact that it experienced an unexpected token while
reading the "being written" template files. 

 

Has anyone already seen such event? Do we really need to stop and restart
devmon when importing a new template?

 

Etienne Marganne

TI Automotive.



The information contained in this transmission may contain privileged and confidential information.  It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

[Devmon] Graphs in Hobbit

[Robert H. <rob...@gm...>]

I just recently joined this group and have searched the archives trying to
figure out how to get graphs to show up for devmon in hobbit.  I read on the
hobbit discussion board that the topic was discussed here, and that someone
sent instructions out.  If so, can someone forward me (or the group) a
repeat of these instructions.  If not, anyone care to share how they did
it?  I imagine it has something to do with NCV.

Robert

Re: [Devmon] Problem with templates

[Marganne, E. <ema...@be...>]

Hello Michael

Well now it works for me. But I got that error several times, I mean during
more than an hour. I will let you know the probable source of the problem
which is not the template or the SNMP version.

I increase the poll time to 300 seconds with a cycle time of 60sec, 5sec=
 for
timeout and 2 retries. I think that it is not necessary to put a poll time
shorter than the interval to read the bb-hosts file.

Regards

Etienne Marganne
TI Automotive.

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of Michael
A. Price
Sent: jeudi 1 mars 2007 14:22
To: dev...@li...
Subject: Re: [Devmon] Problem with templates

Some times... I run into the same thing....

This only happens on switches/routers when the CPU is at like 70% plus=20
and it gets a SNMP request from the server...

It rarely happens manually with snmpget command, but I was able to=20
replicate the error while doing an snmpget...

let me know what you find..

I adjusted some of the timeout settings in devmon to allow more time for=20
the device to respond...

thanks, michael

Michael A. Price
SGT, Inc. www.sgt-inc.com
NASA/GSFC Code 440.8/LMB
Greenbelt, Maryland 20770
            Phone:  240-684-1356
            Cell:   410-507-7476
            e-mail: mp...@sg...
	    e-mail: mp...@hs...
----------------------------------------------




Marganne, Etienne wrote:
> Well now the problem has triggered once again. It does not seam to find
any
> data for the oids configure on the templates.=20
> No SNMP data found for ifOutErrors on testdevice
> Missing repeater data for trans_delta on ifInEps
>
> I am very sure that the testdevice is responding, the community string is
ok
> and that devmon uses the good template. All errors are generated by
> dm_tests.pm.=20
>
> I will go further to try to fix but if anyone could help, it will be
> welcome.
>
> Regards,
>
> Etienne Marganne
> TI Automotive
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
Marganne,
> Etienne
> Sent: jeudi 1 mars 2007 8:32
> To: dev...@li...
> Subject: Re: [Devmon] Problem with templates
>
>
> OK thank you it works now.
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
> Schwimmer, Eric E *HS
> Sent: mercredi 28 f=E9vrier 2007 17:51
> To: dev...@li...
> Subject: Re: [Devmon] Problem with templates
>
>
> Hi Etienne,
>
> If you snmpquery your test device from the machine you are running
> devmon on, using the same snmp cid, version, and OID that you have fed
> to devmon, do you get a successful response?
>
> i.e.:
>
> snmpget -c your_cid -v1 testdevice .1.3.6.1.2.1.1.1.0
>
> -Eric
>
>  =20
>> -----Original Message-----
>> From: dev...@li...
>>    =20
> [mailto:devmon-support-
>  =20
>> bo...@li...] On Behalf Of Marganne, Etienne
>> Sent: Wednesday, February 28, 2007 6:13 AM
>> To: dev...@li...
>> Subject: [Devmon] Problem with templates
>>
>> Hello
>>
>>
>>
>> I am currently testing Devmon and it works well with the pre-done
>> templates. I have tried to write a new one and I got this error:
>>
>> No SNMP data found for sysDescr on testdevice
>>
>> No SNMP data found for sysUpTime on testdevice
>>
>> No SNMP data found for sysContact on testdevice
>>
>>
>>
>> The oids are correct :
>>
>> sysDescr        : .1.3.6.1.2.1.1.1.0    : leaf
>>
>> sysUpTime       : .1.3.6.1.2.1.1.3.0    : leaf
>>
>> sysContact      : .1.3.6.1.2.1.1.4.0    : leaf
>>
>>
>>
>> Could someone try to help me?
>>
>>
>>
>> Many thanks.
>>
>> The information contained in this transmission may contain privileged
>>    =20
> and
>  =20
>> confidential information. It is intended only for the use of the
>>    =20
> person(s)
>  =20
>> named above. If you are not the intended recipient, you are hereby
>> notified that any review, dissemination, distribution or duplication
>>    =20
> of
>  =20
>> this communication is strictly prohibited. If you are not the intended
>> recipient, please contact the sender by reply email and destroy all
>>    =20
> copies
>  =20
>> of the original message.
>>
>>    =20
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
> The information contained in this transmission may contain privileged and
> confidential information.  It is intended only for the use of the
person(s)
> named above. If you are not the intended recipient, you are hereby
notified
> that any review, dissemination, distribution or duplication of this
> communication is strictly prohibited. If you are not the intended
recipient,
> please contact the sender by reply email and destroy all copies of the
> original message.
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
> The information contained in this transmission may contain privileged and
confidential information.  It is intended only for the use of the person(s)
named above. If you are not the intended recipient, you are hereby notified
that any review, dissemination, distribution or duplication of this
communication is strictly prohibited. If you are not the intended=
 recipient,
please contact the sender by reply email and destroy all copies of the
original message.
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>  =20

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

The information contained in this transmission may contain privileged and=
 confidential information.  It is intended only for the use of the=
 person(s) named above. If you are not the intended recipient, you are=
 hereby notified that any review, dissemination, distribution or=
 duplication of this communication is strictly prohibited. If you are not=
 the intended recipient, please contact the sender by reply email and=
 destroy all copies of the original message.

Re: [Devmon] Problem with templates

[Michael A. P. <mp...@hs...>]

Some times... I run into the same thing....

This only happens on switches/routers when the CPU is at like 70% plus 
and it gets a SNMP request from the server...

It rarely happens manually with snmpget command, but I was able to 
replicate the error while doing an snmpget...

let me know what you find..

I adjusted some of the timeout settings in devmon to allow more time for 
the device to respond...

thanks, michael

Michael A. Price
SGT, Inc. www.sgt-inc.com
NASA/GSFC Code 440.8/LMB
Greenbelt, Maryland 20770
            Phone:  240-684-1356
            Cell:   410-507-7476
            e-mail: mp...@sg...
	    e-mail: mp...@hs...
----------------------------------------------




Marganne, Etienne wrote:
> Well now the problem has triggered once again. It does not seam to find any
> data for the oids configure on the templates. 
> No SNMP data found for ifOutErrors on testdevice
> Missing repeater data for trans_delta on ifInEps
>
> I am very sure that the testdevice is responding, the community string is ok
> and that devmon uses the good template. All errors are generated by
> dm_tests.pm. 
>
> I will go further to try to fix but if anyone could help, it will be
> welcome.
>
> Regards,
>
> Etienne Marganne
> TI Automotive
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of Marganne,
> Etienne
> Sent: jeudi 1 mars 2007 8:32
> To: dev...@li...
> Subject: Re: [Devmon] Problem with templates
>
>
> OK thank you it works now.
>
> -----Original Message-----
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
> Schwimmer, Eric E *HS
> Sent: mercredi 28 février 2007 17:51
> To: dev...@li...
> Subject: Re: [Devmon] Problem with templates
>
>
> Hi Etienne,
>
> If you snmpquery your test device from the machine you are running
> devmon on, using the same snmp cid, version, and OID that you have fed
> to devmon, do you get a successful response?
>
> i.e.:
>
> snmpget -c your_cid -v1 testdevice .1.3.6.1.2.1.1.1.0
>
> -Eric
>
>   
>> -----Original Message-----
>> From: dev...@li...
>>     
> [mailto:devmon-support-
>   
>> bo...@li...] On Behalf Of Marganne, Etienne
>> Sent: Wednesday, February 28, 2007 6:13 AM
>> To: dev...@li...
>> Subject: [Devmon] Problem with templates
>>
>> Hello
>>
>>
>>
>> I am currently testing Devmon and it works well with the pre-done
>> templates. I have tried to write a new one and I got this error:
>>
>> No SNMP data found for sysDescr on testdevice
>>
>> No SNMP data found for sysUpTime on testdevice
>>
>> No SNMP data found for sysContact on testdevice
>>
>>
>>
>> The oids are correct :
>>
>> sysDescr        : .1.3.6.1.2.1.1.1.0    : leaf
>>
>> sysUpTime       : .1.3.6.1.2.1.1.3.0    : leaf
>>
>> sysContact      : .1.3.6.1.2.1.1.4.0    : leaf
>>
>>
>>
>> Could someone try to help me?
>>
>>
>>
>> Many thanks.
>>
>> The information contained in this transmission may contain privileged
>>     
> and
>   
>> confidential information. It is intended only for the use of the
>>     
> person(s)
>   
>> named above. If you are not the intended recipient, you are hereby
>> notified that any review, dissemination, distribution or duplication
>>     
> of
>   
>> this communication is strictly prohibited. If you are not the intended
>> recipient, please contact the sender by reply email and destroy all
>>     
> copies
>   
>> of the original message.
>>
>>     
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
> The information contained in this transmission may contain privileged and
> confidential information.  It is intended only for the use of the person(s)
> named above. If you are not the intended recipient, you are hereby notified
> that any review, dissemination, distribution or duplication of this
> communication is strictly prohibited. If you are not the intended recipient,
> please contact the sender by reply email and destroy all copies of the
> original message.
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
> The information contained in this transmission may contain privileged and confidential information.  It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys-and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
>   

Re: [Devmon] Problem with templates

[Marganne, E. <ema...@be...>]

Well now the problem has triggered once again. It does not seam to find any
data for the oids configure on the templates.=20
No SNMP data found for ifOutErrors on testdevice
Missing repeater data for trans_delta on ifInEps

I am very sure that the testdevice is responding, the community string is=
 ok
and that devmon uses the good template. All errors are generated by
dm_tests.pm.=20

I will go further to try to fix but if anyone could help, it will be
welcome.

Regards,

Etienne Marganne
TI Automotive
-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of=
 Marganne,
Etienne
Sent: jeudi 1 mars 2007 8:32
To: dev...@li...
Subject: Re: [Devmon] Problem with templates


OK thank you it works now.

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Schwimmer, Eric E *HS
Sent: mercredi 28 f=E9vrier 2007 17:51
To: dev...@li...
Subject: Re: [Devmon] Problem with templates


Hi Etienne,

If you snmpquery your test device from the machine you are running
devmon on, using the same snmp cid, version, and OID that you have fed
to devmon, do you get a successful response?

i.e.:

snmpget -c your_cid -v1 testdevice .1.3.6.1.2.1.1.1.0

-Eric

> -----Original Message-----
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Marganne, Etienne
> Sent: Wednesday, February 28, 2007 6:13 AM
> To: dev...@li...
> Subject: [Devmon] Problem with templates
>=20
> Hello
>=20
>=20
>=20
> I am currently testing Devmon and it works well with the pre-done
> templates. I have tried to write a new one and I got this error:
>=20
> No SNMP data found for sysDescr on testdevice
>=20
> No SNMP data found for sysUpTime on testdevice
>=20
> No SNMP data found for sysContact on testdevice
>=20
>=20
>=20
> The oids are correct :
>=20
> sysDescr        : .1.3.6.1.2.1.1.1.0    : leaf
>=20
> sysUpTime       : .1.3.6.1.2.1.1.3.0    : leaf
>=20
> sysContact      : .1.3.6.1.2.1.1.4.0    : leaf
>=20
>=20
>=20
> Could someone try to help me?
>=20
>=20
>=20
> Many thanks.
>=20
> The information contained in this transmission may contain privileged
and
> confidential information. It is intended only for the use of the
person(s)
> named above. If you are not the intended recipient, you are hereby
> notified that any review, dissemination, distribution or duplication
of
> this communication is strictly prohibited. If you are not the intended
> recipient, please contact the sender by reply email and destroy all
copies
> of the original message.
>=20

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

The information contained in this transmission may contain privileged and
confidential information.  It is intended only for the use of the person(s)
named above. If you are not the intended recipient, you are hereby notified
that any review, dissemination, distribution or duplication of this
communication is strictly prohibited. If you are not the intended=
 recipient,
please contact the sender by reply email and destroy all copies of the
original message.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

The information contained in this transmission may contain privileged and=
 confidential information.  It is intended only for the use of the=
 person(s) named above. If you are not the intended recipient, you are=
 hereby notified that any review, dissemination, distribution or=
 duplication of this communication is strictly prohibited. If you are not=
 the intended recipient, please contact the sender by reply email and=
 destroy all copies of the original message.

Re: [Devmon] Problem with templates

[Marganne, E. <ema...@be...>]

OK thank you it works now.

-----Original Message-----
From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Schwimmer, Eric E *HS
Sent: mercredi 28 f=E9vrier 2007 17:51
To: dev...@li...
Subject: Re: [Devmon] Problem with templates


Hi Etienne,

If you snmpquery your test device from the machine you are running
devmon on, using the same snmp cid, version, and OID that you have fed
to devmon, do you get a successful response?

i.e.:

snmpget -c your_cid -v1 testdevice .1.3.6.1.2.1.1.1.0

-Eric

> -----Original Message-----
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Marganne, Etienne
> Sent: Wednesday, February 28, 2007 6:13 AM
> To: dev...@li...
> Subject: [Devmon] Problem with templates
>=20
> Hello
>=20
>=20
>=20
> I am currently testing Devmon and it works well with the pre-done
> templates. I have tried to write a new one and I got this error:
>=20
> No SNMP data found for sysDescr on testdevice
>=20
> No SNMP data found for sysUpTime on testdevice
>=20
> No SNMP data found for sysContact on testdevice
>=20
>=20
>=20
> The oids are correct :
>=20
> sysDescr        : .1.3.6.1.2.1.1.1.0    : leaf
>=20
> sysUpTime       : .1.3.6.1.2.1.1.3.0    : leaf
>=20
> sysContact      : .1.3.6.1.2.1.1.4.0    : leaf
>=20
>=20
>=20
> Could someone try to help me?
>=20
>=20
>=20
> Many thanks.
>=20
> The information contained in this transmission may contain privileged
and
> confidential information. It is intended only for the use of the
person(s)
> named above. If you are not the intended recipient, you are hereby
> notified that any review, dissemination, distribution or duplication
of
> this communication is strictly prohibited. If you are not the intended
> recipient, please contact the sender by reply email and destroy all
copies
> of the original message.
>=20

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share=
 your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=
=3DDEVDEV
_______________________________________________
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support

The information contained in this transmission may contain privileged and=
 confidential information.  It is intended only for the use of the=
 person(s) named above. If you are not the intended recipient, you are=
 hereby notified that any review, dissemination, distribution or=
 duplication of this communication is strictly prohibited. If you are not=
 the intended recipient, please contact the sender by reply email and=
 destroy all copies of the original message.

Re: [Devmon] Problem with templates

[Schwimmer, E. E *H. <EE...@hs...>]

Hi Etienne,

If you snmpquery your test device from the machine you are running
devmon on, using the same snmp cid, version, and OID that you have fed
to devmon, do you get a successful response?

i.e.:

snmpget -c your_cid -v1 testdevice .1.3.6.1.2.1.1.1.0

-Eric

> -----Original Message-----
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Marganne, Etienne
> Sent: Wednesday, February 28, 2007 6:13 AM
> To: dev...@li...
> Subject: [Devmon] Problem with templates
>=20
> Hello
>=20
>=20
>=20
> I am currently testing Devmon and it works well with the pre-done
> templates. I have tried to write a new one and I got this error:
>=20
> No SNMP data found for sysDescr on testdevice
>=20
> No SNMP data found for sysUpTime on testdevice
>=20
> No SNMP data found for sysContact on testdevice
>=20
>=20
>=20
> The oids are correct :
>=20
> sysDescr        : .1.3.6.1.2.1.1.1.0    : leaf
>=20
> sysUpTime       : .1.3.6.1.2.1.1.3.0    : leaf
>=20
> sysContact      : .1.3.6.1.2.1.1.4.0    : leaf
>=20
>=20
>=20
> Could someone try to help me?
>=20
>=20
>=20
> Many thanks.
>=20
> The information contained in this transmission may contain privileged
and
> confidential information. It is intended only for the use of the
person(s)
> named above. If you are not the intended recipient, you are hereby
> notified that any review, dissemination, distribution or duplication
of
> this communication is strictly prohibited. If you are not the intended
> recipient, please contact the sender by reply email and destroy all
copies
> of the original message.
>=20

[Devmon] Problem with templates

[Marganne, E. <ema...@be...>]

Hello

 

I am currently testing Devmon and it works well with the pre-done templates.
I have tried to write a new one and I got this error:

No SNMP data found for sysDescr on testdevice

No SNMP data found for sysUpTime on testdevice

No SNMP data found for sysContact on testdevice

 

The oids are correct :

sysDescr        : .1.3.6.1.2.1.1.1.0    : leaf

sysUpTime       : .1.3.6.1.2.1.1.3.0    : leaf

sysContact      : .1.3.6.1.2.1.1.4.0    : leaf

 

Could someone try to help me?

 

Many thanks.



The information contained in this transmission may contain privileged and confidential information.  It is intended only for the use of the person(s) named above. If you are not the intended recipient, you are hereby notified that any review, dissemination, distribution or duplication of this communication is strictly prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.

[Devmon] Default status on down routers.

[Thomas <tlp...@ho...>]

Hi All,

How can I change the default status of a down router in devmon ? 
currently I get a clear status but this is not really what I want.

Anybody with a quick answer ?

Regards, Thomas

Re: [Devmon] netapp?

[Trent M. <tme...@sa...>]

Here is my log file from a single run with verbose logging. =20

The IP of the filer  is 172.16.104.21

Trent Melcher
Unix/Linux Systems Administrator
Securities America Financial Corporation
(402) 399-9111 x2774
tme...@sa...=20

Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC.
Advisory services offered through Securities America Advisors, Inc., an
SEC Registered Investment Advisory

The text of this communication is confidential, and use by any person
who is not the intended recipient is prohibited.  Any person who
receives this communication in error is requested to immediately destroy
the text of this communication without copying or further dissemination.
Your cooperation is appreciated.

=20

> -----Original Message-----
> From: dev...@li...=20
> [mailto:dev...@li...] On=20
> Behalf Of Schwimmer, Eric E *HS
> Sent: Friday, February 09, 2007 2:54 PM
> To: dev...@li...
> Subject: Re: [Devmon] netapp?
>=20
>=20
> Hrm.  A quick peek at the template shows that it is set up to=20
> use v1 by default.  (i.e. the 'snmpver' variable in the specs=20
> file is set to '1').
>=20
> Could you run devmon in verbose debugging mode and send me=20
> the output from a single run? (devmon -vvv -d -p).  Thanks.
>=20
> -Eric
>=20
> > -----Original Message-----
> > From: dev...@li...
> [mailto:devmon-support-
> > bo...@li...] On Behalf Of Lor...@pf...
> > Sent: Friday, February 09, 2007 12:43 PM
> > To: dev...@li...
> > Subject: Re: [Devmon] netapp?
> >=20
> >=20
> > Which leads to the next question:
> >=20
> > Can we either:
> >         a. enable snmp v 2c on the filer
> >                 or
> >         b. enable snmp v 1 in devmon
> >=20
> > Loris
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> > Lor...@pf...
> > Sent by: dev...@li...
> >=20
> > 09/02/2007 17:40
> > Please respond to
> > dev...@li...
> >=20
> > To
> > dev...@li...
> > cc
> > dev...@li..., devmon-support-=20
> > bo...@li... Subject
> > Re: [Devmon] netapp?
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> > Spot on, Trent!
> >=20
> > snmpwalk -v 1 viking <public_string> works fine snmpwalk -v=20
> 2c viking=20
> > <public_string> returns "Timeout: No Response
> from
> > viking"
> >=20
> > Loris
> >=20
> >=20
> >=20
> >=20
> >=20
> > "Trent Melcher" <tme...@sa...> Sent by:=20
> > dev...@li...
> >=20
> > 09/02/2007 17:34
> >=20
> > Please respond to
> > dev...@li...
> >=20
> > To
> > <dev...@li...>
> > cc
> > Subject
> > Re: [Devmon] netapp?
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> > Not sure what the issue is,  but it almost seems that devmon isnt
> trying
> > version 1 on the snmp, it looks like its trying version 2c and only
> which
> > of course the files dont listen for 2c.
> >=20
> > Trent
> >=20
> >=20
> > Trent Melcher
> > Unix/Linux Systems Administrator
> > Securities America Financial Corporation
> > (402) 399-9111 x2774
> > tme...@sa...
> >=20
> > Securities America, Inc., a Registered Broker/Dealer, Member
> NASD/SIPC.
> > Advisory services offered through Securities America Advisors, Inc.,
> an
> > SEC Registered Investment Advisory
> >=20
> > The text of this communication is confidential, and use by=20
> any person
> who
> > is not the intended recipient is prohibited.  Any person=20
> who receives
> this
> > communication in error is requested to immediately destroy=20
> the text of=20
> > this communication without copying or further dissemination.  Your=20
> > cooperation is appreciated.
> >=20
> >=20
> >=20
> >=20
> > ________________________________
> >=20
> > From: dev...@li...
> [mailto:devmon-support-
> > bo...@li...] On Behalf Of Lor...@pf...
> > Sent: Friday, February 09, 2007 11:19 AM
> > To: dev...@li...
> > Subject: Re: [Devmon] netapp?
> >=20
> >=20
> > Yep, using devmon 0.2.2 here too...
> >=20
> > Also, I'm not familiar with snmpget, but snmpwalk seems to=20
> be working
> ok:
> >=20
> > [bb@genesis bb]$ snmpwalk viking <public-string> | more=20
> > system.sysDescr.0 =3D "NetApp Release 7.0.0.1: Wed Mar  2 23:30:22 =
PST
> 2005"
> > system.sysObjectID.0 =3D OID:
> enterprises.netapp.netappProducts.netappFiler
> > system.sysUpTime.0 =3D Timeticks: (3352152460) 387 days, 23:32:04.60 =

> > system.sysContact.0 =3D "its...@ou..."
> > system.sysName.0 =3D "viking.ourdomain.com"
> > system.sysLocation.0 =3D "Computer Room 1"
> > system.sysServices.0 =3D 72
> > interfaces.ifNumber.0 =3D 5
> > interfaces.ifTable.ifEntry.ifIndex.1 =3D 1
> > interfaces.ifTable.ifEntry.ifIndex.2 =3D 2
> > interfaces.ifTable.ifEntry.ifIndex.3 =3D 3
> > interfaces.ifTable.ifEntry.ifIndex.4 =3D 4
> > interfaces.ifTable.ifEntry.ifIndex.5 =3D 5
> > interfaces.ifTable.ifEntry.ifDescr.1 =3D "e0a"
> > interfaces.ifTable.ifEntry.ifDescr.2 =3D "e0b"
> > interfaces.ifTable.ifEntry.ifDescr.3 =3D "lo"
> > interfaces.ifTable.ifEntry.ifDescr.4 =3D "vh"
> > interfaces.ifTable.ifEntry.ifDescr.5 =3D "vif0"
> > interfaces.ifTable.ifEntry.ifType.1 =3D ethernet-csmacd(6)
> > interfaces.ifTable.ifEntry.ifType.2 =3D ethernet-csmacd(6)
> > interfaces.ifTable.ifEntry.ifType.3 =3D softwareLoopback(24)
> > interfaces.ifTable.ifEntry.ifType.4 =3D softwareLoopback(24)
> > interfaces.ifTable.ifEntry.ifType.5 =3D ethernet-csmacd(6)
> > interfaces.ifTable.ifEntry.ifMtu.1 =3D 1500
> > interfaces.ifTable.ifEntry.ifMtu.2 =3D 1500
> > interfaces.ifTable.ifEntry.ifMtu.3 =3D 9188
> > interfaces.ifTable.ifEntry.ifMtu.4 =3D 9188
> > interfaces.ifTable.ifEntry.ifMtu.5 =3D 1500
> > interfaces.ifTable.ifEntry.ifSpeed.1 =3D Gauge32: 1000000000
> > interfaces.ifTable.ifEntry.ifSpeed.2 =3D Gauge32: 1000000000
> > interfaces.ifTable.ifEntry.ifSpeed.3 =3D Gauge32: 0
> > interfaces.ifTable.ifEntry.ifSpeed.4 =3D Gauge32: 0
> > interfaces.ifTable.ifEntry.ifSpeed.5 =3D Gauge32: 1000000000
> > interfaces.ifTable.ifEntry.ifPhysAddress.1 =3D  Hex: 02 A0 98 01 76 =
44
> > interfaces.ifTable.ifEntry.ifPhysAddress.2 =3D  Hex: 02 A0 98 01 76 =
44
> >=20
> > <snip>
> >=20
> > What value should I try to query with snmpget?
> >=20
> > Thanks
> >=20
> > Loris
> >=20
> >=20
> >=20
> > "Johann Eggers" <Joh...@te...> Sent by:=20
> > dev...@li...
> >=20
> > 09/02/2007 16:08
> >=20
> > Please respond to
> > dev...@li...
> >=20
> >=20
> >=20
> > To
> > <dev...@li...>
> > cc
> > Subject
> > Re: [Devmon] netapp?
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> > Ugh... seems that devmon is not able to get any of the OID=20
> data out of
> your
> > box...
> >=20
> > Im running devmon version 0.2.2
> >=20
> > Have you tried to query the OID's manually with snmpget. Did you
> receive a
> > result?
> >=20
> > Johann
> >=20
> >=20
> >=20
> >=20
> >=20
> > ________________________________
> >=20
> >=20
> >=20
> >=20
> > From: dev...@li...
> [mailto:devmon-support-
> > bo...@li...] On Behalf Of Lor...@pf...
> > Sent: Freitag, 9. Februar 2007 16:56
> > To: dev...@li...
> > Subject: Re: [Devmon] netapp?
> >=20
> >=20
> > hmmm...
> >=20
> > getting a bunch of errors in the devmon.log file (viking is our=20
> > FAS270).
> > Any idea what I may be missing here?
> >=20
> > Thanks
> >=20
> > Loris
> >=20
> >=20
> > [07-02-09@14:11:46] ---Initilizing devmon...
> > [07-02-09@14:11:46] Node 0 reporting to localhost=20
> [07-02-09@14:11:46]=20
> > Running under process id: 12996 [07-02-09@14:11:46]=20
> Entering poll loop=20
> > [07-02-09@15:19:57] No SNMP data found for envOverTemperature on
> viking
> > [07-02-09@15:19:57] No SNMP data found for=20
> envFailedPowerSupplyMessage
> on
> > viking
> > [07-02-09@15:19:57] No SNMP data found for=20
> envFailedFanCount on viking=20
> > [07-02-09@15:19:57] No SNMP data found for=20
> miscGlobalStatusMessage on=20
> > viking [07-02-09@15:19:57] No SNMP data found for=20
> diskFailedCount on=20
> > viking [07-02-09@15:19:57] No SNMP data found for=20
> > envFailedPowerSupplyCount
> on
> > viking
> > [07-02-09@15:19:57] No SNMP data found for miscGlobalStatus=20
> on viking=20
> > [07-02-09@15:19:57] No SNMP data found for nvramBatteryStatus on
> viking
> > [07-02-09@15:19:57] No SNMP data found for envFailedFanMessage on
> viking
> > [07-02-09@15:19:57] No SNMP data found for=20
> diskFailedMessage on viking=20
> > [07-02-09@15:19:57] No SNMP data found for currentTemp on viking=20
> > [07-02-09@15:19:57] No snmp data found for nvramBatteryStatus on
> viking
> > [07-02-09@15:19:57] No snmp data found for envOverTemperature on
> viking
> > [07-02-09@15:19:57] No SNMP data found for qrVType on viking=20
> > [07-02-09@15:19:57] No SNMP data found for qrVPathName on viking=20
> > [07-02-09@15:19:57] No SNMP data found for qrVKBytesUsed on viking=20
> > [07-02-09@15:19:57] No SNMP data found for qrVKBytesLimit on viking=20
> > [07-02-09@15:19:57] Missing primary oid data for trans_math on=20
> > qrVGBytesLimit [07-02-09@15:19:57] Missing primary oid data for=20
> > trans_math on qrPercentUsed [07-02-09@15:19:57] Missing primary oid=20
> > data for trans_math on qrVGBytesUsed [07-02-09@15:19:57] Missing=20
> > repeater data for trans_switch on
> qrTypeDescr
> > [07-02-09@15:19:57] Missing repeater data for qrVPathName for quota
> msg
> > [07-02-09@15:19:57] No SNMP data found for dfKBytesTotal on viking=20
> > [07-02-09@15:19:57] No SNMP data found for dfKBytesUsed on viking=20
> > [07-02-09@15:19:57] No SNMP data found for dfFileSys on viking=20
> > [07-02-09@15:19:57] Missing primary oid data for trans_math on
> dfPercent
> > [07-02-09@15:19:57] Missing primary oid data for trans_math on=20
> > dfGBytesTotal [07-02-09@15:19:57] Missing primary oid data for=20
> > trans_math on dfGBytesUsed [07-02-09@15:19:57] Missing=20
> repeater data=20
> > for dfFileSys for volume msg [07-02-09@15:19:57] No SNMP data found=20
> > for cfPartnerStatus on viking [07-02-09@15:19:57] No SNMP=20
> data found=20
> > for cfPartnerName on viking [07-02-09@15:19:57] No SNMP=20
> data found for=20
> > cfCannotTakeoverCause on
> viking
> > [07-02-09@15:19:57] No SNMP data found for cfSettings on viking=20
> > [07-02-09@15:19:57] No SNMP data found for cfInterconnectStatus on
> viking
> > [07-02-09@15:19:57] No SNMP data found for cfState on viking=20
> > [07-02-09@15:19:57] No snmp data found for cfPartnerStatus=20
> on viking=20
> > [07-02-09@15:19:57] No snmp data found for cfState on viking=20
> > [07-02-09@15:19:57] No snmp data found for cfInterconnectStatus on
> viking
> > [07-02-09@15:19:57] No snmp data found for cfSettings on viking=20
> > [07-02-09@15:19:57] No snmp data found for cfCannotTakeoverCause on
> viking
> > [07-02-09@15:19:57] No SNMP data found for envOverTemperature on
> viking
> > [07-02-09@15:19:57] No SNMP data found for currentTemp on viking=20
> > [07-02-09@15:19:57] No SNMP data found for ifOutOctets on viking=20
> > [07-02-09@15:19:57] No SNMP data found for ifDescr on viking=20
> > [07-02-09@15:19:57] No SNMP data found for ifInOctets on viking=20
> > [07-02-09@15:19:57] No SNMP data found for ifBps on viking=20
> > [07-02-09@15:19:57] Missing repeater data for trans_delta=20
> on ifInOps=20
> > [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifInOps on
> viking:
> > 'Missing primary oid data'
> > does not match regex '^[-+]?\d+(\.\d+)?$'
> > [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifInBps on
> viking:
> > 'Bad data' does not match r
> > egex '^[-+]?\d+(\.\d+)?$'
> > [07-02-09@15:19:57] Missing repeater data for trans_delta=20
> on ifOutOps=20
> > [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifOutOps on
> viking:
> > 'Missing primary oid data'
> > does not match regex '^[-+]?\d+(\.\d+)?$'
> > [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifOutBps on
> viking:
> > 'Bad data' does not match
> > regex '^[-+]?\d+(\.\d+)?$'
> > [07-02-09@15:19:57] Missing repeater data for trans_elapsed=20
> on ifSpeed=20
> > [07-02-09@15:19:57] Missing repeater data for ifDescr for=20
> if_load msg=20
> > [07-02-09@15:19:57] Error: dm_msg trying to send a blank message!
> > [07-02-09@15:19:57] Error: dm_msg trying to send a blank message!
> > [07-02-09@15:19:57] Error: dm_msg trying to send a blank message!
> >=20
> >=20
> >=20
> > "Johann Eggers" <Joh...@te...> Sent by:=20
> > dev...@li...
> >=20
> > 09/02/2007 15:37
> >=20
> >=20
> >=20
> > Please respond to
> > dev...@li...
> >=20
> >=20
> >=20
> > To
> > <dev...@li...>
> > cc
> >=20
> > Subject
> > Re: [Devmon] netapp?
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> >=20
> > _______________________________________
> > From: dev...@li...
> > [mailto:dev...@li...] On Behalf Of=20
> > Lor...@pf...
> > Sent: Freitag, 9. Februar 2007 16:31
> > Cc: dev...@li...
> > Subject: Re: [Devmon] netapp?
> >=20
> >=20
> > Hi Johann,
> >=20
> > Are these supposed to work also for a NetApp Filer FAS270?
> >=20
> > Cheers
> >=20
> > Loris
> >=20
> > ------------------------------------
> > Hi Loris,
> >=20
> > I have them working against FAS270c and 3050c NetApp systems
> >=20
> > -Johann
> >=20
> >
> --------------------------------------------------------------
> ----------
> -
> > Using Tomcat but need to do more? Need to support web services,
> security?
> > Get stuff done quickly with pre-integrated technology to=20
> make your job=20
> > easier.
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> >
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&
> dat=3D121642
> > _______________________________________________
> > Devmon-support mailing list
> > Dev...@li...
> >
> https://lists.sourceforge.net/lists/listinfo/devmon-support---
> ----------
> --
> > ----------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web services,
> security?
> > Get stuff done quickly with pre-integrated technology to=20
> make your job=20
> > easier.
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> > http://sel.as-
> >
> us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642____
> __________
> __
> > _______________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> >
> --------------------------------------------------------------
> ----------
> -
> > Using Tomcat but need to do more? Need to support web services,
> security?
> > Get stuff done quickly with pre-integrated technology to=20
> make your job=20
> > easier.
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> > http://sel.as-
> >
> us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642____
> __________
> __
> > _______________________________
> > Devmon-support mailing list
> > Dev...@li...
> >
> https://lists.sourceforge.net/lists/listinfo/devmon-support---
> ----------
> --
> > ----------------------------------------------------------
> > Using Tomcat but need to do more? Need to support web services,
> security?
> > Get stuff done quickly with pre-integrated technology to=20
> make your job=20
> > easier.
> > Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> > http://sel.as-
> >
> us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642____
> __________
> __
> > _______________________________
> > Devmon-support mailing list
> > Dev...@li...
> > https://lists.sourceforge.net/lists/listinfo/devmon-support
> >=20
>=20
>=20
> --------------------------------------------------------------
> -----------
> Using Tomcat but need to do more? Need to support web=20
> services, security?
> Get stuff done quickly with pre-integrated technology to make=20
> your job easier.
> Download IBM WebSphere Application Server v.1.0.1 based on=20
> Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&
> dat=3D121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>=20

Re: [Devmon] netapp?

[Trent M. <tme...@sa...>]
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Re: [Devmon] netapp?

[Schwimmer, E. E *H. <EE...@hs...>]

Hrm.  A quick peek at the template shows that it is set up to use v1 by
default.  (i.e. the 'snmpver' variable in the specs file is set to '1').

Could you run devmon in verbose debugging mode and send me the output
from a single run? (devmon -vvv -d -p).  Thanks.

-Eric

> -----Original Message-----
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Lor...@pf...
> Sent: Friday, February 09, 2007 12:43 PM
> To: dev...@li...
> Subject: Re: [Devmon] netapp?
>=20
>=20
> Which leads to the next question:
>=20
> Can we either:
>         a. enable snmp v 2c on the filer
>                 or
>         b. enable snmp v 1 in devmon
>=20
> Loris
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Lor...@pf...
> Sent by: dev...@li...
>=20
> 09/02/2007 17:40
> Please respond to
> dev...@li...
>=20
> To
> dev...@li...
> cc
> dev...@li..., devmon-support-
> bo...@li...
> Subject
> Re: [Devmon] netapp?
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Spot on, Trent!
>=20
> snmpwalk -v 1 viking <public_string> works fine
> snmpwalk -v 2c viking <public_string> returns "Timeout: No Response
from
> viking"
>=20
> Loris
>=20
>=20
>=20
>=20
>=20
> "Trent Melcher" <tme...@sa...>
> Sent by: dev...@li...
>=20
> 09/02/2007 17:34
>=20
> Please respond to
> dev...@li...
>=20
> To
> <dev...@li...>
> cc
> Subject
> Re: [Devmon] netapp?
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Not sure what the issue is,  but it almost seems that devmon isnt
trying
> version 1 on the snmp, it looks like its trying version 2c and only
which
> of course the files dont listen for 2c.
>=20
> Trent
>=20
>=20
> Trent Melcher
> Unix/Linux Systems Administrator
> Securities America Financial Corporation
> (402) 399-9111 x2774
> tme...@sa...
>=20
> Securities America, Inc., a Registered Broker/Dealer, Member
NASD/SIPC.
> Advisory services offered through Securities America Advisors, Inc.,
an
> SEC Registered Investment Advisory
>=20
> The text of this communication is confidential, and use by any person
who
> is not the intended recipient is prohibited.  Any person who receives
this
> communication in error is requested to immediately destroy the text of
> this communication without copying or further dissemination.  Your
> cooperation is appreciated.
>=20
>=20
>=20
>=20
> ________________________________
>=20
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Lor...@pf...
> Sent: Friday, February 09, 2007 11:19 AM
> To: dev...@li...
> Subject: Re: [Devmon] netapp?
>=20
>=20
> Yep, using devmon 0.2.2 here too...
>=20
> Also, I'm not familiar with snmpget, but snmpwalk seems to be working
ok:
>=20
> [bb@genesis bb]$ snmpwalk viking <public-string> | more
> system.sysDescr.0 =3D "NetApp Release 7.0.0.1: Wed Mar  2 23:30:22 PST
2005"
> system.sysObjectID.0 =3D OID:
enterprises.netapp.netappProducts.netappFiler
> system.sysUpTime.0 =3D Timeticks: (3352152460) 387 days, 23:32:04.60
> system.sysContact.0 =3D "its...@ou..."
> system.sysName.0 =3D "viking.ourdomain.com"
> system.sysLocation.0 =3D "Computer Room 1"
> system.sysServices.0 =3D 72
> interfaces.ifNumber.0 =3D 5
> interfaces.ifTable.ifEntry.ifIndex.1 =3D 1
> interfaces.ifTable.ifEntry.ifIndex.2 =3D 2
> interfaces.ifTable.ifEntry.ifIndex.3 =3D 3
> interfaces.ifTable.ifEntry.ifIndex.4 =3D 4
> interfaces.ifTable.ifEntry.ifIndex.5 =3D 5
> interfaces.ifTable.ifEntry.ifDescr.1 =3D "e0a"
> interfaces.ifTable.ifEntry.ifDescr.2 =3D "e0b"
> interfaces.ifTable.ifEntry.ifDescr.3 =3D "lo"
> interfaces.ifTable.ifEntry.ifDescr.4 =3D "vh"
> interfaces.ifTable.ifEntry.ifDescr.5 =3D "vif0"
> interfaces.ifTable.ifEntry.ifType.1 =3D ethernet-csmacd(6)
> interfaces.ifTable.ifEntry.ifType.2 =3D ethernet-csmacd(6)
> interfaces.ifTable.ifEntry.ifType.3 =3D softwareLoopback(24)
> interfaces.ifTable.ifEntry.ifType.4 =3D softwareLoopback(24)
> interfaces.ifTable.ifEntry.ifType.5 =3D ethernet-csmacd(6)
> interfaces.ifTable.ifEntry.ifMtu.1 =3D 1500
> interfaces.ifTable.ifEntry.ifMtu.2 =3D 1500
> interfaces.ifTable.ifEntry.ifMtu.3 =3D 9188
> interfaces.ifTable.ifEntry.ifMtu.4 =3D 9188
> interfaces.ifTable.ifEntry.ifMtu.5 =3D 1500
> interfaces.ifTable.ifEntry.ifSpeed.1 =3D Gauge32: 1000000000
> interfaces.ifTable.ifEntry.ifSpeed.2 =3D Gauge32: 1000000000
> interfaces.ifTable.ifEntry.ifSpeed.3 =3D Gauge32: 0
> interfaces.ifTable.ifEntry.ifSpeed.4 =3D Gauge32: 0
> interfaces.ifTable.ifEntry.ifSpeed.5 =3D Gauge32: 1000000000
> interfaces.ifTable.ifEntry.ifPhysAddress.1 =3D  Hex: 02 A0 98 01 76 44
> interfaces.ifTable.ifEntry.ifPhysAddress.2 =3D  Hex: 02 A0 98 01 76 44
>=20
> <snip>
>=20
> What value should I try to query with snmpget?
>=20
> Thanks
>=20
> Loris
>=20
>=20
>=20
> "Johann Eggers" <Joh...@te...>
> Sent by: dev...@li...
>=20
> 09/02/2007 16:08
>=20
> Please respond to
> dev...@li...
>=20
>=20
>=20
> To
> <dev...@li...>
> cc
> Subject
> Re: [Devmon] netapp?
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> Ugh... seems that devmon is not able to get any of the OID data out of
your
> box...
>=20
> Im running devmon version 0.2.2
>=20
> Have you tried to query the OID's manually with snmpget. Did you
receive a
> result?
>=20
> Johann
>=20
>=20
>=20
>=20
>=20
> ________________________________
>=20
>=20
>=20
>=20
> From: dev...@li...
[mailto:devmon-support-
> bo...@li...] On Behalf Of Lor...@pf...
> Sent: Freitag, 9. Februar 2007 16:56
> To: dev...@li...
> Subject: Re: [Devmon] netapp?
>=20
>=20
> hmmm...
>=20
> getting a bunch of errors in the devmon.log file
> (viking is our FAS270).
> Any idea what I may be missing here?
>=20
> Thanks
>=20
> Loris
>=20
>=20
> [07-02-09@14:11:46] ---Initilizing devmon...
> [07-02-09@14:11:46] Node 0 reporting to localhost
> [07-02-09@14:11:46] Running under process id: 12996
> [07-02-09@14:11:46] Entering poll loop
> [07-02-09@15:19:57] No SNMP data found for envOverTemperature on
viking
> [07-02-09@15:19:57] No SNMP data found for envFailedPowerSupplyMessage
on
> viking
> [07-02-09@15:19:57] No SNMP data found for envFailedFanCount on viking
> [07-02-09@15:19:57] No SNMP data found for miscGlobalStatusMessage on
> viking
> [07-02-09@15:19:57] No SNMP data found for diskFailedCount on viking
> [07-02-09@15:19:57] No SNMP data found for envFailedPowerSupplyCount
on
> viking
> [07-02-09@15:19:57] No SNMP data found for miscGlobalStatus on viking
> [07-02-09@15:19:57] No SNMP data found for nvramBatteryStatus on
viking
> [07-02-09@15:19:57] No SNMP data found for envFailedFanMessage on
viking
> [07-02-09@15:19:57] No SNMP data found for diskFailedMessage on viking
> [07-02-09@15:19:57] No SNMP data found for currentTemp on viking
> [07-02-09@15:19:57] No snmp data found for nvramBatteryStatus on
viking
> [07-02-09@15:19:57] No snmp data found for envOverTemperature on
viking
> [07-02-09@15:19:57] No SNMP data found for qrVType on viking
> [07-02-09@15:19:57] No SNMP data found for qrVPathName on viking
> [07-02-09@15:19:57] No SNMP data found for qrVKBytesUsed on viking
> [07-02-09@15:19:57] No SNMP data found for qrVKBytesLimit on viking
> [07-02-09@15:19:57] Missing primary oid data for trans_math on
> qrVGBytesLimit
> [07-02-09@15:19:57] Missing primary oid data for trans_math on
> qrPercentUsed
> [07-02-09@15:19:57] Missing primary oid data for trans_math on
> qrVGBytesUsed
> [07-02-09@15:19:57] Missing repeater data for trans_switch on
qrTypeDescr
> [07-02-09@15:19:57] Missing repeater data for qrVPathName for quota
msg
> [07-02-09@15:19:57] No SNMP data found for dfKBytesTotal on viking
> [07-02-09@15:19:57] No SNMP data found for dfKBytesUsed on viking
> [07-02-09@15:19:57] No SNMP data found for dfFileSys on viking
> [07-02-09@15:19:57] Missing primary oid data for trans_math on
dfPercent
> [07-02-09@15:19:57] Missing primary oid data for trans_math on
> dfGBytesTotal
> [07-02-09@15:19:57] Missing primary oid data for trans_math on
> dfGBytesUsed
> [07-02-09@15:19:57] Missing repeater data for dfFileSys for volume msg
> [07-02-09@15:19:57] No SNMP data found for cfPartnerStatus on viking
> [07-02-09@15:19:57] No SNMP data found for cfPartnerName on viking
> [07-02-09@15:19:57] No SNMP data found for cfCannotTakeoverCause on
viking
> [07-02-09@15:19:57] No SNMP data found for cfSettings on viking
> [07-02-09@15:19:57] No SNMP data found for cfInterconnectStatus on
viking
> [07-02-09@15:19:57] No SNMP data found for cfState on viking
> [07-02-09@15:19:57] No snmp data found for cfPartnerStatus on viking
> [07-02-09@15:19:57] No snmp data found for cfState on viking
> [07-02-09@15:19:57] No snmp data found for cfInterconnectStatus on
viking
> [07-02-09@15:19:57] No snmp data found for cfSettings on viking
> [07-02-09@15:19:57] No snmp data found for cfCannotTakeoverCause on
viking
> [07-02-09@15:19:57] No SNMP data found for envOverTemperature on
viking
> [07-02-09@15:19:57] No SNMP data found for currentTemp on viking
> [07-02-09@15:19:57] No SNMP data found for ifOutOctets on viking
> [07-02-09@15:19:57] No SNMP data found for ifDescr on viking
> [07-02-09@15:19:57] No SNMP data found for ifInOctets on viking
> [07-02-09@15:19:57] No SNMP data found for ifBps on viking
> [07-02-09@15:19:57] Missing repeater data for trans_delta on ifInOps
> [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifInOps on
viking:
> 'Missing primary oid data'
> does not match regex '^[-+]?\d+(\.\d+)?$'
> [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifInBps on
viking:
> 'Bad data' does not match r
> egex '^[-+]?\d+(\.\d+)?$'
> [07-02-09@15:19:57] Missing repeater data for trans_delta on ifOutOps
> [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifOutOps on
viking:
> 'Missing primary oid data'
> does not match regex '^[-+]?\d+(\.\d+)?$'
> [07-02-09@15:19:57] Data type mismatch for leaf 1 of ifOutBps on
viking:
> 'Bad data' does not match
> regex '^[-+]?\d+(\.\d+)?$'
> [07-02-09@15:19:57] Missing repeater data for trans_elapsed on ifSpeed
> [07-02-09@15:19:57] Missing repeater data for ifDescr for if_load msg
> [07-02-09@15:19:57] Error: dm_msg trying to send a blank message!
> [07-02-09@15:19:57] Error: dm_msg trying to send a blank message!
> [07-02-09@15:19:57] Error: dm_msg trying to send a blank message!
>=20
>=20
>=20
> "Johann Eggers" <Joh...@te...>
> Sent by: dev...@li...
>=20
> 09/02/2007 15:37
>=20
>=20
>=20
> Please respond to
> dev...@li...
>=20
>=20
>=20
> To
> <dev...@li...>
> cc
>=20
> Subject
> Re: [Devmon] netapp?
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
>=20
> _______________________________________
> From: dev...@li...
> [mailto:dev...@li...] On Behalf Of
> Lor...@pf...
> Sent: Freitag, 9. Februar 2007 16:31
> Cc: dev...@li...
> Subject: Re: [Devmon] netapp?
>=20
>=20
> Hi Johann,
>=20
> Are these supposed to work also for a NetApp Filer FAS270?
>=20
> Cheers
>=20
> Loris
>=20
> ------------------------------------
> Hi Loris,
>=20
> I have them working against FAS270c and 3050c NetApp systems
>=20
> -Johann
>=20
>
------------------------------------------------------------------------
-
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
>
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
> _______________________________________________
> Devmon-support mailing list
> Dev...@li...
>
https://lists.sourceforge.net/lists/listinfo/devmon-support-------------
--
> ----------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> http://sel.as-
>
us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642_______=
_______
__
> _______________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>
------------------------------------------------------------------------
-
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> http://sel.as-
>
us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642_______=
_______
__
> _______________________________
> Devmon-support mailing list
> Dev...@li...
>
https://lists.sourceforge.net/lists/listinfo/devmon-support-------------
--
> ----------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier.
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
Geronimo
> http://sel.as-
>
us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D121642_______=
_______
__
> _______________________________
> Devmon-support mailing list
> Dev...@li...
> https://lists.sourceforge.net/lists/listinfo/devmon-support
>=20

Re: [Devmon] netapp?

[<Lor...@pf...>]

On the NetApp side of things, the Data ONTAP 7.0 Network Management Guide=20
states that=20
"Data ONTAP provides an SNMP agent compatible with SNMP version 1"

:-(







"Trent Melcher" <tme...@sa...>=20
Sent by: dev...@li...
09/02/2007 17:49
Please respond to
dev...@li...


To
<dev...@li...>
cc

Subject
Re: [Devmon] netapp?






I thought devmon was suppose to try both ver 2 then ver 1,  at least the=20
code looks like its suppose to.
=20
In the db=5Fconfig.pm  there is a loop that checks snmpver  2, 1
=20
=20
Trent
=20
Trent Melcher
Unix/Linux Systems Administrator
Securities America Financial Corporation
(402) 399-9111 x2774
tme...@sa...=20
Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC.=20
Advisory services offered through Securities America Advisors, Inc., an=20
SEC Registered Investment Advisory
The text of this communication is confidential, and use by any person who=20
is not the intended recipient is prohibited.  Any person who receives this =

communication in error is requested to immediately destroy the text of=20
this communication without copying or further dissemination.  Your=20
cooperation is appreciated.
=20

From: dev...@li...=20
[mailto:dev...@li...] On Behalf Of=20
Lor...@pf...
Sent: Friday, February 09, 2007 11:43 AM
To: dev...@li...
Subject: Re: [Devmon] netapp?


Which leads to the next question:=20

Can we either:=20
        a. enable snmp v 2c on the filer=20
                or=20
        b. enable snmp v 1 in devmon=20
=20
Loris=20






Lor...@pf...=20
Sent by: dev...@li...=20
09/02/2007 17:40=20

Please respond to
dev...@li...



To
dev...@li...=20
cc
dev...@li...,=20
dev...@li...=20
Subject
Re: [Devmon] netapp?









Spot on, Trent!=20

snmpwalk -v 1 viking <public=5Fstring> works fine=20
snmpwalk -v 2c viking <public=5Fstring> returns "Timeout: No Response from =

viking"=20

Loris=20




"Trent Melcher" <tme...@sa...>=20
Sent by: dev...@li...=20
09/02/2007 17:34=20

Please respond to
dev...@li...



To
<dev...@li...>=20
cc

Subject
Re: [Devmon] netapp?










Not sure what the issue is,  but it almost seems that devmon isnt trying=20
version 1 on the snmp, it looks like its trying version 2c and only which=20
of course the files dont listen for 2c.=20
=20
Trent=20
=20
Trent Melcher
Unix/Linux Systems Administrator
Securities America Financial Corporation
(402) 399-9111 x2774
tme...@sa...=20
Securities America, Inc., a Registered Broker/Dealer, Member NASD/SIPC.=20
Advisory services offered through Securities America Advisors, Inc., an=20
SEC Registered Investment Advisory
The text of this communication is confidential, and use by any person who=20
is not the intended recipient is prohibited.  Any person who receives this =

communication in error is requested to immediately destroy the text of=20
this communication without copying or further dissemination.  Your=20
cooperation is appreciated.=20


From: dev...@li...=20
[mailto:dev...@li...] On Behalf Of=20
Lor...@pf...
Sent: Friday, February 09, 2007 11:19 AM
To: dev...@li...
Subject: Re: [Devmon] netapp?


Yep, using devmon 0.2.2 here too...=20

Also, I'm not familiar with snmpget, but snmpwalk seems to be working ok:=20

[bb@genesis bb]$ snmpwalk viking <public-string> | more=20
system.sysDescr.0 =3D "NetApp Release 7.0.0.1: Wed Mar  2 23:30:22 PST 2005=
"=20

system.sysObjectID.0 =3D OID: enterprises.netapp.netappProducts.netappFiler=
=20
system.sysUpTime.0 =3D Timeticks: (3352152460) 387 days, 23:32:04.60=20
system.sysContact.0 =3D "its...@ou..."=20
system.sysName.0 =3D "viking.ourdomain.com"=20
system.sysLocation.0 =3D "Computer Room 1"=20
system.sysServices.0 =3D 72=20
interfaces.ifNumber.0 =3D 5=20
interfaces.ifTable.ifEntry.ifIndex.1 =3D 1=20
interfaces.ifTable.ifEntry.ifIndex.2 =3D 2=20
interfaces.ifTable.ifEntry.ifIndex.3 =3D 3=20
interfaces.ifTable.ifEntry.ifIndex.4 =3D 4=20
interfaces.ifTable.ifEntry.ifIndex.5 =3D 5=20
interfaces.ifTable.ifEntry.ifDescr.1 =3D "e0a"=20
interfaces.ifTable.ifEntry.ifDescr.2 =3D "e0b"=20
interfaces.ifTable.ifEntry.ifDescr.3 =3D "lo"=20
interfaces.ifTable.ifEntry.ifDescr.4 =3D "vh"=20
interfaces.ifTable.ifEntry.ifDescr.5 =3D "vif0"=20
interfaces.ifTable.ifEntry.ifType.1 =3D ethernet-csmacd(6)=20
interfaces.ifTable.ifEntry.ifType.2 =3D ethernet-csmacd(6)=20
interfaces.ifTable.ifEntry.ifType.3 =3D softwareLoopback(24)=20
interfaces.ifTable.ifEntry.ifType.4 =3D softwareLoopback(24)=20
interfaces.ifTable.ifEntry.ifType.5 =3D ethernet-csmacd(6)=20
interfaces.ifTable.ifEntry.ifMtu.1 =3D 1500=20
interfaces.ifTable.ifEntry.ifMtu.2 =3D 1500=20
interfaces.ifTable.ifEntry.ifMtu.3 =3D 9188=20
interfaces.ifTable.ifEntry.ifMtu.4 =3D 9188=20
interfaces.ifTable.ifEntry.ifMtu.5 =3D 1500=20
interfaces.ifTable.ifEntry.ifSpeed.1 =3D Gauge32: 1000000000=20
interfaces.ifTable.ifEntry.ifSpeed.2 =3D Gauge32: 1000000000=20
interfaces.ifTable.ifEntry.ifSpeed.3 =3D Gauge32: 0=20
interfaces.ifTable.ifEntry.ifSpeed.4 =3D Gauge32: 0=20
interfaces.ifTable.ifEntry.ifSpeed.5 =3D Gauge32: 1000000000=20
interfaces.ifTable.ifEntry.ifPhysAddress.1 =3D  Hex: 02 A0 98 01 76 44=20
interfaces.ifTable.ifEntry.ifPhysAddress.2 =3D  Hex: 02 A0 98 01 76 44=20

<snip>=20

What value should I try to query with snmpget?=20

Thanks=20

Loris=20


"Johann Eggers" <Joh...@te...>=20
Sent by: dev...@li...=20
09/02/2007 16:08=20

Please respond to
dev...@li...



To
<dev...@li...>=20
cc

Subject
Re: [Devmon] netapp?












Ugh? seems that devmon is not able to get any of the OID data out of your=20
box?=20

Im running devmon version 0.2.2=20

Have you tried to query the OID?s manually with snmpget. Did you receive a =

result?=20

Johann=20
=20







From: dev...@li...=20
[mailto:dev...@li...] On Behalf Of=20
Lor...@pf...
Sent: Freitag, 9. Februar 2007 16:56
To: dev...@li...
Subject: Re: [Devmon] netapp?=20


hmmm...=20

getting a bunch of errors in the devmon.log file=20
(viking is our FAS270).=20
Any idea what I may be missing here?=20

Thanks=20

Loris=20


[07-02-09@14:11:46] ---Initilizing devmon...=20
[07-02-09@14:11:46] Node 0 reporting to localhost=20
[07-02-09@14:11:46] Running under process id: 12996=20
[07-02-09@14:11:46] Entering poll loop=20
[07-02-09@15:19:57] No SNMP data found for envOverTemperature on viking=20
[07-02-09@15:19:57] No SNMP data found for envFailedPowerSupplyMessage on=20
viking=20
[07-02-09@15:19:57] No SNMP data found for envFailedFanCount on viking=20
[07-02-09@15:19:57] No SNMP data found for miscGlobalStatusMessage on=20
viking=20
[07-02-09@15:19:57] No SNMP data found for diskFailedCount on viking=20
[07-02-09@15:19:57] No SNMP data found for envFailedPowerSupplyCount on=20
viking=20
[07-02-09@15:19:57] No SNMP data found for miscGlobalStatus on viking=20
[07-02-09@15:19:57] No SNMP data found for nvramBatteryStatus on viking=20
[07-02-09@15:19:57] No SNMP data found for envFailedFanMessage on viking=20
[07-02-09@15:19:57] No SNMP data found for diskFailedMessage on viking=20
[07-02-09@15:19:57] No SNMP data found for currentTemp on viking=20
[07-02-09@15:19:57] No snmp data found for nvramBatteryStatus on viking=20
[07-02-09@15:19:57] No snmp data found for envOverTemperature on viking=20
[07-02-09@15:19:57] No SNMP data found for qrVType on viking=20
[07-02-09@15:19:57] No SNMP data found for qrVPathName on viking=20
[07-02-09@15:19:57] No SNMP data found for qrVKBytesUsed on viking=20
[07-02-09@15:19:57] No SNMP data found for qrVKBytesLimit on viking=20
[07-02-09@15:19:57] Missing primary oid data for trans=5Fmath on=20
qrVGBytesLimit=20
[07-02-09@15:19:57] Missing primary oid data for trans=5Fmath on=20
qrPercentUsed=20
[07-02-09@15:19:57] Missing primary oid data for trans=5Fmath on=20
qrVGBytesUsed=20
[07-02-09@15:19:57] Missing repeater data for trans=5Fswitch on qrTypeDescr=
=20
[07-02-09@15:19:57] Missing repeater data for qrVPathName for quota msg=20
[07-02-09@15:19:57] No SNMP data found for dfKBytesTotal on viking=20
[07-02-09@15:19:57] No SNMP data found for dfKBytesUsed on viking=20
[07-02-09@15:19:57] No SNMP data found for dfFileSys on viking=20
[07-02-09@15:19:57] Missing primary oid data for trans=5Fmath on dfPercent =

[07-02-09@15:19:57] Missing primary oid data for trans=5Fmath on=20
dfGBytesTotal=20
[07-02-09@15:19:57] Missing primary oid data for trans=5Fmath on=20
dfGBytesUsed=20
[07-02-09@15:19:57] Missing repeater data for dfFileSys for volume msg=20
[07-02-09@15:19:57] No SNMP data found for cfPartnerStatus on viking=20
[07-02-09@15:19:57] No SNMP data found for cfPartnerName on viking=20
[07-02-09@15:19:57] No SNMP data found for cfCannotTakeoverCause on viking =


[07-02-09@15:19:57] No SNMP data found for cfSettings on viking=20
[07-02-09@15:19:57] No SNMP data found for cfInterconnectStatus on viking=20
[07-02-09@15:19:57] No SNMP data found for cfState on viking=20
[07-02-09@15:19:57] No snmp data found for cfPartnerStatus on viking=20
[07-02-09@15:19:57] No snmp data found for cfState on viking=20
[07-02-09@15:19:57] No snmp data found for cfInterconnectStatus on viking=20
[07-02-09@15:19:57] No snmp data found for cfSettings on viking=20
[07-02-09@15:19:57] No snmp data found for cfCannotTakeoverCause on viking =


[07-02-09@15:19:57] No SNMP data found for envOverTemperature on viking=20
[07-02-09@15:19:57] No SNMP data found for currentTemp on viking=20
[07-02-09@15:19:57] No SNMP data found for ifOutOctets on viking=20
[07-02-09@15:19:57] No SNMP data found for ifDescr on viking=20
[07-02-09@15:19:57] No SNMP data found for ifInOctets on viking=20
[07-02-09@15:19:57] No SNMP data found for ifBps on viking=20
[07-02-09@15:19:57] Missing repeater data for trans=5Fdelta on ifInOps=20
[07-02-09@15:19:57] Data type mismatch for leaf 1 of ifInOps on viking:=20
'Missing primary oid data'            does not match regex=20
'^[-+]?\d+(\.\d+)?$'=20
[07-02-09@15:19:57] Data type mismatch for leaf 1 of ifInBps on viking:=20
'Bad data' does not match r            egex '^[-+]?\d+(\.\d+)?$'=20
[07-02-09@15:19:57] Missing repeater data for trans=5Fdelta on ifOutOps=20
[07-02-09@15:19:57] Data type mismatch for leaf 1 of ifOutOps on viking:=20
'Missing primary oid data'            does not match regex=20
'^[-+]?\d+(\.\d+)?$'=20
[07-02-09@15:19:57] Data type mismatch for leaf 1 of ifOutBps on viking:=20
'Bad data' does not match           regex '^[-+]?\d+(\.\d+)?$'=20
[07-02-09@15:19:57] Missing repeater data for trans=5Felapsed on ifSpeed=20
[07-02-09@15:19:57] Missing repeater data for ifDescr for if=5Fload msg=20
[07-02-09@15:19:57] Error: dm=5Fmsg trying to send a blank message!=20
[07-02-09@15:19:57] Error: dm=5Fmsg trying to send a blank message!=20
[07-02-09@15:19:57] Error: dm=5Fmsg trying to send a blank message!=20


"Johann Eggers" <Joh...@te...>=20
Sent by: dev...@li...=20
09/02/2007 15:37=20


Please respond to
dev...@li...



To
<dev...@li...>=20
cc
 =20
Subject
Re: [Devmon] netapp?



=20


 =20
=20





=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
From: dev...@li...
[mailto:dev...@li...] On Behalf Of
Lor...@pf...
Sent: Freitag, 9. Februar 2007 16:31
Cc: dev...@li...
Subject: Re: [Devmon] netapp?


Hi Johann,=20

Are these supposed to work also for a NetApp Filer FAS270?=20

Cheers=20

Loris=20

------------------------------------
Hi Loris,

I have them working against FAS270c and 3050c NetApp systems

-Johann

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job=20
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job=20
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F

Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job=20
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F

Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support----------------=
---------------------------------------------------------

Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job=20
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F

Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job=20
easier.
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D1=
21642
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=
=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F=5F
Devmon-support mailing list
Dev...@li...
https://lists.sourceforge.net/lists/listinfo/devmon-support