Re: [Devil-linux-develop] Build problem

[Heiko Z. <hz...@pr...>]

I would suggest that you use the 1.0 version, since the 1.1 build syste=
m is
undergoing major changes right now and is right now hard to support/deb=
ug
in such an early stage.
Specify "-r rel-1-0-patches" when you do a checkout from the CVS.

Using 1.1 only makes sense when you do active development.
I'll also document a bug, so I add this to the documentation,

cya
  Heiko

On 10/14/2003 11:24:39 AM "ferris bueller" wrote:
>I have a problem building a new customized version.
>This morning (I am in Europe), I did download
>lfssystem-cvs-20030127-i486-stripped.tar.bz2
>then I ran the 2 cvs command written in the doc (V1 and above)
>then I ran >cvs update -d -P<
>then I ran >./updatesrc<
>then I ran >make menuconfig< and I did customize as usual.
>then I ran >make build< and there was the following message:
>
>******************
>/data/build# make build
>
>executing prepare with option build
>applying patch: /data/build/tmp/kernel-patches/cflags_extra.diff
>patching file Makefile
>Hunk #1 succeeded at 96 (offset 3 lines).
>applying patch: /data/build/tmp/kernel-patches/init-sharing.patch
>patching file init/do_mounts.c
>patching file init/main.c
>Hunk #1 succeeded at 26 with fuzz 2.
>Hunk #2 succeeded at 425 (offset -3 lines).
>Hunk #4 succeeded at 549 (offset -3 lines).
>Hunk #5 succeeded at 565 (offset -1 lines).
>applying patch:
>/data/build/tmp/kernel-patches/linux-2.4.22-i2c-2.8.0.patch
>patching file drivers/acorn/char/i2c.c
>patching file drivers/acorn/char/pcf8583.c
>patching file drivers/i2c/Config.in
>patching file drivers/i2c/Makefile
>patching file Documentation/i2c/dev-interface
>patching file Documentation/i2c/i2c-pport
>patching file Documentation/i2c/i2c-protocol
>patching file Documentation/i2c/i2c-velleman
>patching file Documentation/i2c/smbus-protocol
>patching file Documentation/i2c/summary
>patching file Documentation/i2c/writing-clients
>patching file drivers/i2c/i2c-adap-ibm_ocp.c
>patching file drivers/i2c/i2c-algo-8xx.c
>patching file include/linux/i2c-algo-8xx.h
>patching file drivers/i2c/i2c-algo-bit.c
>patching file include/linux/i2c-algo-bit.h
>patching file drivers/i2c/i2c-algo-ibm_ocp.c
>patching file include/linux/i2c-algo-ibm_ocp.h
>patching file drivers/i2c/i2c-algo-pcf.c
>patching file include/linux/i2c-algo-pcf.h
>patching file drivers/i2c/i2c-algo-sibyte.c
>patching file include/linux/i2c-algo-sibyte.h
>patching file drivers/i2c/i2c-core.c
>patching file drivers/i2c/i2c-dev.c
>patching file include/linux/i2c-dev.h
>patching file drivers/i2c/i2c-elektor.c
>patching file include/linux/i2c-elektor.h
>patching file drivers/i2c/i2c-elv.c
>patching file drivers/i2c/i2c-frodo.c
>patching file include/linux/i2c-id.h
>patching file drivers/i2c/i2c-max1617.c
>patching file drivers/i2c/i2c-pcf-epp.c
>patching file include/linux/i2c-pcf8584.h
>patching file drivers/i2c/i2c-philips-par.c
>patching file drivers/i2c/i2c-pport.c
>patching file drivers/i2c/i2c-proc.c
>patching file include/linux/i2c-proc.h
>patching file drivers/i2c/i2c-rpx.c
>patching file drivers/i2c/i2c-sibyte.c
>patching file drivers/i2c/i2c-velleman.c
>patching file include/linux/i2c.h
>patching file Documentation/Configure.help
>patching file drivers/i2c/i2c-adap-ite.c
>patching file drivers/i2c/i2c-algo-ite.c
>patching file drivers/i2c/i2c-keywest.c
>patching file drivers/i2c/scx200_acb.c
>patching file drivers/i2c/scx200_i2c.c
>patching file drivers/ieee1394/pcilynx.c
>patching file drivers/media/video/Makefile
>patching file drivers/media/video/bt832.c
>patching file drivers/media/video/bttv-if.c
>patching file drivers/media/video/i2c-old.c
>patching file drivers/media/video/msp3400.c
>patching file drivers/media/video/saa5249.c
>patching file drivers/media/video/saa7146.h
>patching file drivers/media/video/swarm_saa7114h.c
>patching file drivers/media/video/tda7432.c
>patching file drivers/media/video/tda9875.c
>patching file drivers/media/video/tda9887.c
>patching file drivers/media/video/tuner-3036.c
>patching file drivers/media/video/tuner.c
>patching file drivers/media/video/tvaudio.c
>patching file drivers/media/video/tvmixer.c
>patching file drivers/pcmcia/sa1100_stork.c
>patching file drivers/sound/dmasound/dac3550a.c
>patching file drivers/sound/dmasound/tas3001c.c
>patching file drivers/video/matrox/i2c-matroxfb.c
>patching file drivers/video/matrox/matroxfb_maven.c
>applying patch:
>/data/build/tmp/kernel-patches/patch-watchdogdriver-pcwd.diff
>patching file drivers/char/pcwd.c
>make[1]: Entering directory `/data/build/tmp/linux-2.4.22'
>Makefile:260: arch/i/Makefile: No such file or directory
>make[1]: *** No rule to make target `arch/i/Makefile'.  Stop.
>make[1]: Leaving directory `/data/build/tmp/linux-2.4.22'
>ERROR
>/data/build/scripts/prepare build failed
>make: *** [build] Error 1
>
>******************
>
>I also tried the option prepare but I do not see any difference in the=

>result (As you can see, I am not sure how to use this option...)
>
>Did I forgot something, is the problem comming from my side?
>
>_________________________________________________________________
>Hotmail : un compte GRATUIT qui vous suit partout et tout le temps !
>http://g.msn.fr/FR1000/9493
>
>
>
>-------------------------------------------------------
>This SF.net email is sponsored by: SF.net Giveback Program.
>SourceForge.net hosts over 70,000 Open Source Projects.
>See the people who have HELPED US provide better services:
>Click here: http://sourceforge.net/supporters.php
>_______________________________________________
>Devil-linux-develop mailing list
>Dev...@li...
>https://lists.sourceforge.net/lists/listinfo/devil-linux-develop



=